* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Sample Cells
Survey
Document related concepts
Signal transduction wikipedia , lookup
Cell encapsulation wikipedia , lookup
Cytoplasmic streaming wikipedia , lookup
Biochemical switches in the cell cycle wikipedia , lookup
Cell membrane wikipedia , lookup
Extracellular matrix wikipedia , lookup
Endomembrane system wikipedia , lookup
Cellular differentiation wikipedia , lookup
Programmed cell death wikipedia , lookup
Cell culture wikipedia , lookup
Cell growth wikipedia , lookup
Organ-on-a-chip wikipedia , lookup
Transcript
Fluorolog-3 v. 2.0 (15 Feb 2001) Components & Accessories Sample Cells Model 1955 HPLC Flow Cell With a sample capacity of 20 µL, this non-fluorescing fused silica cell is ideal for online monitoring of fluorescent samples. The cell maintains high sensitivity because it has a large aperture for collecting the excitation light to the sample and fluorescence emission from the sample. The flat sides allow maximum throughput while keeping the scattering of the incident radiation to a minimum. The cell fits in a standard cell holder. Model 1923 Micro Cell (with Model 1923A Adapter) This non-fluorescing fused silica cylindrical cell holds 50 µL. This cell will not accept a magnetic stirrer. The 1923A Adapter is required to be able to mount in a standard 10 mm by 10 mm cell holder. Model 1924 Micro Cell (with Model 1924A Adapter) This non-fluorescing fused silica cylindrical cell holds 250 µL. A magnetic stirrer cannot be used with this cell. The 1924A Adapter is required to enable mounting in the standard 10-mm-×-10-mm cell holder. Model 1925 Quartz Cuvette With a 4-mL volume, this cell measures 10 mm × 10 mm in cross-section, and comes with a Teflon® stopper to contain volatile liquids. Model 1920 Sample Cell This 2-mL to 4-mL non-fluorescing fused silica cell, capable of accepting a magnetic stirrer, has a 10-mm path length and includes a white Teflon® cap that prevents sample evaporation. Model QC-SK Reduced Volume Sample Cell This non-fluorescing fused silica cell is selected for samples with a maximum volume of 1 mL. The square cross-section of the sample cavity is 5 mm. The precise imaging capability of the excitation light focused onto the sample allows for high sensitivity. The adapter and a “flea” magnetic stirrer are included. 6-8