* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Cell Shape and Arrangement
Survey
Document related concepts
Endomembrane system wikipedia , lookup
Extracellular matrix wikipedia , lookup
Tissue engineering wikipedia , lookup
Cytokinesis wikipedia , lookup
Cell growth wikipedia , lookup
Cell encapsulation wikipedia , lookup
Cellular differentiation wikipedia , lookup
Cell culture wikipedia , lookup
Transcript
Gram Staining (and Cell Shape and Arrangement) (WINTER 2014 version) Introduction Gram stain - Most common bacteria are described as being either Gram positive (G+) or Gram negative (G-), based on the structure of their cell walls. Gram positive cell walls consist of many layers of peptidoglycan (cross-linked by teichoic acid and lipoteichoic acid). Gram negative cell walls have one or very few layers of peptidoglycan, surrounded by a lipid-based outer membrane. In the 1880s, Hans Gram developed a differential method of staining that now bears his name. Gram staining is an important way to characterize bacteria. When a bacterial smear is Gram stained, G+ cells will appear purple, while G- cells will appear pink. Cell shape and Arrangement - The three main shapes of bacterial cells are: Spheres (cocci [plural] or coccus [singular] Rods (bacilli [plural] or bacillus [singular] Helical (spirilla [plural] or spirillum [singular] The main arrangements are single cells, diplo- (pairs), staphylo- (clusters), and strepto- (chains). Results – GRAM reaction G+ (Gram positive) = Purple cells G- (Gram negative) = Pink cells Results - Cell shape and Arrangement Cell Shape - Coccus or Bacillus Cell Arrangement – Single, Chains (strepto- arrangement) or Clusters (staphylo- arrangement) NOTE: In practice, it is usually difficult to determine whether Gram-positive cocci are in clusters or chains when viewed in a Gram-stain. This is because chains are broken apart during the production of a smeared slide, and because cells tend to be brought together into artificial clumps as the water evaporates from the slide as it air dries. Therefore, streptococci often end up looking like they are in clusters. The take home message is DO NOT RELY ON ARRANGEMENT. Methods 1. Clean a microscope slide with Bon Ami cleanser, rinse (H2O) and soak for 1 min in isopropyl alcohol. 2. Dry the slide with paper towels. 3. Make a bacterial smear. a. From an agar stock culture, put a SMALL drop of water on the slide and smear a SMALL amount of cells into the water. b. From a broth stock culture, smear several (6 to 8) loop-fulls of broth onto the slide. 4. Allow the slide to air dry (so that there is no visible moisture on the slide). 5. Heat fix the slide by passing it (cell side up) three times through the cool (upper) part of the flame of a Bunsen burner OR hold directly above the opening of a Bacticinerator for 45 seconds. 6. Flood the slide with Gram's Crystal Violet for 1 min. Rinse with distilled water. 7. Flood the slide with Gram's Iodine for 1 min. Rinse with distilled water. 8. Flood the slide with Acetone-Alcohol for exactly 5 seconds. Rinse with distilled water. 9. Flood the slide with Safranin for 2 min. Rinse with distilled water. 10. Blot dry with bibulous paper. 11. View under 4x, 10x, 40x, and oil immersion (100x). A Gram-stain can only be validly evaluated using immersion oil and the oil immersion lens (1000x total magnification)! Photographs Gram-positive diplococci Gram-positive staphylococci Gram-positive streptococci Gram-negative bacilli Gram-negative bacilli