Download Foundry Design Kit

Process design environment
a sub-project under the parent Angstrem-T project
Content and structure of the Process Design
Kit
• Design rules and specification
Process Design Kit
(PDK)
process
•Process files
• Device models
• Device library
• Skill (Pcell skill code)
• Physical verification
Process design
environment
• Combinational logic
Standard Cell Libraries
(SC)
• Trigger logic
• Special cells
• Clock cells
• Delays
• Signal
IO Cell Libraries
(IO)
• Analog
• Oscillator
• Power cells
• Earth cells
• Special cells
• SRAM, single-port
Memory Compilers
(МЕМ)
• SRAM, dual-port
• Register files (1 and 2 ports)
• ROM
• САМ
2
Standard Cell Libraries (SC)
Long experience – it has more than a dozen standard cell libraries developed
for foreign and domestic semiconductor manufacturers.
Cell layout
Design flow – it is based on the usage of Cadence licensed software and ensures the
library development within a short period of time.
• Circuit and layout design (Cadence Virtuoso®);
• Extraction of cell schemes from layout with RC-parameters (Cadence Assura);
• Characterization of library cells (Cadence Encounter® Library Characterizer);
• Creation of library views (doc, gds, cdl, lib, verilog, vhdl, etc.).
Inverter
Cell composition – it is defined on the basis of analysis of the standard cell libraries
of world leaders in ASIC-libraries development and consultations of leading domestic
design centers, it has more than 500 elements including:
• Combinational logic: Inverter, Buffer, AND, OR, XOR,
AND-OR-Inverter, OR-AND-Inverter, Multiplexer, Half Adder, Full Adder,
Compressor;
• Trigger elements: Transparent Latch, D Flip-Flop (scan, enable),
JK Flip-Flop, RS latch;
• Special elements: Delay cells, Clock Gating cells, Tie off cell
(logic 1 or 0), Bus Holder cells, Fillers cells, Filler Cap cells, Antenna Cell.
2AND-NOT
Front Set-Reset Flip-Flop
3
IO Cell Libraries (IO)
Purpose – input-output pad libraries have a full set of elements to digital
and analog interface design of the chip with 3.3 V and 2.5 V supply
voltage.
Input/output element layout
Design flow – it is based on the usage of Cadence licensed software and
ensures the library development within a short period of time.
• Circuit and layout design (Cadence Virtuoso®);
• Extraction of cell schemes from layout with RC-parameters (Cadence
Assura);
• Characterization of library cells (Cadence Encounter®
Library Characterizer);
• Creation of library views (doc, gds, cdl, lib, verilog, vhdl, etc.).
Features:
• Optimization with consideration of the requirements to noise level for
power and earth buses
• Imbedded ESD protection circuits (4kV level)
• Programmable values of output power (8 levels in 2mA – 24mA range)
• Programmable values of output front time
• Programmable values of the input signal switching threshold
(CMOS/TTL)
• Hysteresis
• Current shifting to power and earth buses
Power pad
(P60VIO_D)
Output pad
(P60O33_D1)
4
Memory Compilers
Design flow – a library approach to the creation of compiler database has
been realized, including:
- database structure development;
- in-house design procedure for library cells;
- development of design rules for library cells;
- in-house internal format for compilation algorithm description.
Memory block architecture – an original mechanism of frequency
control has been realized which ensures the exact correspondence between
design and actual parameters of compiled memory blocks.
A patent for memory block architecture with a system of reading speed
automatic adjustment has been received.
SRAM architecture
Patents
Characterization – a unique in-house characterization system for
compiler cell library has been developed, including:
- block library preparation procedure;
- mathematical technique;
- an in-house CAD software kit.
5
User Library Views
A wide range of views of the standard cell library ensures a
Advanced CAD
simple and easy project design procedure with the use of advanced
computer-aided design tools.
Library views:
•
Cell library catalogue (PDF)
•
Schematic circuit diagram (CDL-netlist)
•
Symbolic representation of cells (Symbol)
•
Layer-by-layer description of cell layout (GDSII)
•
Physical model of cell layout (LEF)
•
Library characterization in Liberty format
•
Library characterization in TLF format
•
SYNOPSYS system database (Milkyway)
•
Behavioural description of cells in Verilog language
•
Behavioural description of cells in VHDL language
6