Download Chapter 11 Carboxylic Anhydrides, Esters, and Amides

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Ring-closing metathesis wikipedia , lookup

Bottromycin wikipedia , lookup

Phenols wikipedia , lookup

Haloalkane wikipedia , lookup

Alcohol wikipedia , lookup

Hydroformylation wikipedia , lookup

Sulfuric acid wikipedia , lookup

Hofmann–Löffler reaction wikipedia , lookup

Wolff rearrangement wikipedia , lookup

Petasis reaction wikipedia , lookup

Strychnine total synthesis wikipedia , lookup

Nucleophilic acyl substitution wikipedia , lookup

Transcript
Chapter 11
Carboxylic Anhydrides, Esters, and Amides
Carboxyl Derivatives
In this chapter, we study three classes of compounds derived
from carboxylic acids; anhydrides, esters, and amides.
• Each is related to a carboxyl group by loss of H2O.
Anhydrides
The functional group of an anhydride is two carbonyl groups
bonded to the same oxygen.
◦ The anhydride may be symmetrical (from two identical acyl
groups), or mixed (from two different acyl groups).
◦ To name an anhydride, drop the word "acid" from the name
of the carboxylic acid from which the anhydride is derived
and add the word "anhydride”.
Examples
Esters
The functional group of an ester is a carbonyl group bonded to
an -OR group. R may be alkyl or aryl.
• Both IUPAC and common names of esters are derived from
the names of the parent carboxylic acids.
• Name the alkyl or aryl group bonded to oxygen first, followed
by the name of the acid; replace the suffix -ic acid by -ate.
• A cyclic ester is called a lactone.
Examples
Amides
The functional group of an amide is a carbonyl group
bonded
to a nitrogen atom.
• To name an amide, drop the suffix -oic acid from the IUPAC
name of the parent acid, or -ic acid from its common name,
and add -amide.
Examples

If the amide nitrogen is also bonded to an alkyl or aryl group,
name the group and show its location on nitrogen by N- ; two
alkyl or aryl groups by N,N-di-.
Amides
A cyclic amide is called a lactam.
Amides
The penicillins are referred to as b-lactam antibiotics
Amides
•
The cephalosporins are also b-lactam antibiotics.
Fischer Esterification
Fischer esterification is the most common method for the
preparation of esters
• In Fischer esterification, a carboxylic acid is reacted with an
alcohol in the presence of an acid catalyst, such as
concentrated sulfuric acid.
Examples
Preparation of Amides
•
In principle, we can form an amide by treating a carboxylic acid
with an amine and removing -OH from the acid and an -H from
the amine.
• In practice what occurs if the two are mixed is an acid-base
reaction to form an ammonium salt.
• If this salt is heated to a high enough temperature, water is
eliminated and an amide forms.
Examples

Predict the amide product

How to synthesize the following compound
Preparation of Amides
•
It is much more common, however, to prepare amides by
treating an amine with an anhydride.
Examples
Hydrolysis of Anhydrides
Hydrolysis is a chemical decomposition involving breaking a
bond and the addition of the elements of water.
• Carboxylic anhydrides, particularly the low-molecular- weight
ones, react readily with water (hydrolyze) to give two
carboxylic acids.
Example
Hydrolysis of Esters
• Esters hydrolyze only very slowly, even in boiling water.
• Hydrolysis becomes considerably more rapid, however, when
the ester is heated in aqueous acid or base.
• Hydrolysis of esters in aqueous acid is the reverse of Fischer
esterification.
• A large excess of water drives the equilibrium to the right to
form the carboxylic acid and alcohol (Le Châtelier's principle).
Examples
Hydrolysis of Esters
• We can also hydrolyze an ester using a hot aqueous base, such
as aqueous NaOH.
• This reaction is often called saponification, a reference to its
use in the manufacture of soaps.
• The carboxylic acid formed in the hydrolysis reacts with
hydroxide ion to form a carboxylic acid anion.
• Each mole of ester hydrolyzed requires one mole of base.
Examples
Hydrolysis of Amides
Amides require more vigorous conditions for hydrolysis in both
acid and base than do esters.
• Hydrolysis in hot aqueous acid gives a carboxylic acid and an
ammonium ion.
• Hydrolysis is driven to completion by the acid-base reaction
between ammonia or the amine and the acid to form an
ammonium ion.
• Each mole of amide hydrolyzed requires one mole of acid.
Hydrolysis of Amides
• Hydrolysis of an amide in aqueous base gives a carboxylic
acid salt and ammonia or an amine.
• Hydrolysis is driven to completion by the acid-base reaction
between the carboxylic acid and base to form a salt.
• Each mole of amide hydrolyzed requires one mole of base.
Examples
Reaction with Alcohols
Anhydrides react with alcohols and phenols to give an ester
and a carboxylic acid.
Reaction with Alcohols
Aspirin is prepared by the reaction of salicylic acid with
acetic anhydride.
Reaction with Amines
Anhydrides react with ammonia and with 1° and 2° amines to
form amides.
◦ Two moles of amine are required; one to form the amide and
one to neutralize the carboxylic acid by-product.
Reaction with Amines

Esters react with ammonia and with 1° and 2° amines to form
amides.

Thus, an amide can be prepared from a carboxylic acid by
first converting the carboxylic acid to an ester by Fischer
esterification and then reaction of the ester with an amine.
Amides do not react with ammonia or with amines

Phosphoric Anhydrides
The functional group of a phosphoric anhydride is two phosphoryl
(P=O) groups bonded to the same oxygen atom.
Phosphoric Esters
• Phosphoric acid forms mono-, di-, and triphosphoric esters.
• In more complex phosphoric esters, it is common to name the
organic molecule and then indicate the presence of the
phosphoric ester by either the word "phosphate" or the prefix
phospho-.
• Dihydroxyacetone phosphate and pyridoxal phosphate are
shown as they are ionized at pH 7.4, the pH of blood plasma.
Step-Growth Polymerization
Step-growth polymers are formed by reaction between two
molecules, each of which contains two functional groups.
Each new bond is created in a separate step.
• in this section, we discuss three types of step-growth
polymers; polyamides, polyesters, and polycarbonates.
Polyamides
Nylon-66 was the first purely synthetic fiber.
• It is synthesized from two six-carbon monomers.
Polyamides
The polyaromatic amide known as Kevlar is made from an
aromatic dicarboxylic acid and an aromatic diamine.
Polyesters
The first polyester involved polymerization of this diester and
diol.
Polycarbonates
Lexan, the most familiar polycarbonate, is formed by reaction
between the disodium salt of bisphenol A and phosgene.