Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
1992 Cape Mendocino earthquakes wikipedia , lookup
2009–18 Oklahoma earthquake swarms wikipedia , lookup
1880 Luzon earthquakes wikipedia , lookup
1570 Ferrara earthquake wikipedia , lookup
2009 L'Aquila earthquake wikipedia , lookup
Earthquake casualty estimation wikipedia , lookup
Base isolation technique in structural design Even as we are living in an era when science and technology is at their best, we still cannot predict earthquakes accurately. Strong earthquakes could easily destroy everything built in years within minutes. To critical facilities such as data centers, Internet collocation facilities, hospitals, and air traffic control centers, the sensitivity of expensive equipment to vibration is very significant so the earthquake hazards present a pressing concern to these facilities. Until science comes up with a better earthquake prediction technology, the civil industry has to rely on better building designs against potential earthquakes. In recent years, base isolation has become an increasingly popular structural design technique for buildings and bridges in highly seismic areas. Many types of structures have been constructed using this approach, and many others are in the design phase or under construction. There are two basic types of isolation systems. The widely-adopted system in recent years is through the use of elastomeric bearings. The elastomer is usually made of natural rubber. In elastomeric bearings approach, the structure is decoupled from the horizontal components of the earthquake motion by interposing a layer with low horizontal stiffness between the ground and the structure. This layer lowers the frequencies of isolated structures compared to fixed-base structures. More importantly, the frequencies of isolated structures are much lower than the predominant frequencies of the ground motion. The isolation system does not absorb the earthquake energy, but rather deflects it through the dynamics of the system. The diagram below provides a visual representation of two different structures: fixed base and elastomeric bearing isolation. A base isolated structure is supported by a series of bearing pads which are placed between the building and the building's foundation. A variety of different types of base isolation bearing pads have now been used, which includes rolling type bearings. Base isolation bearings Fixed-base structures Base isolation structures The second type of isolation system is through the use of sliding system. The approach works by limiting the transfer of shear across the isolation interface. Many sliding systems have been proposed and some have been used. Some of the applications in sliding isolation systems include using specially selected sand in sliding interface (China) and lead-bronze plate sliding on stainless steel with an elastomeric bearing (South Africa). The friction-pendulum system is also a sliding system using a special interfacial material sliding on stainless steel and has been used for several projects in the United States. Rolling type bearings application for equipment isolation The sensitivity of expensive modern equipment to seismic vibration as discussed above has led to consideration of equipment isolation. Manufacturing platforms, computer servers, optical equipments, antiques and so on are high-value instruments. The cost of these instruments might be much higher than structure itself. Adding additional energy dissipation devices to these mechanics can’t be a reasonable solution to resist seismic excitations. Modifying other company’s products may have some technical and legal issues. Taking mechanics apart could lose warranties and the right of maintenance. Most of these mechanics are protected by patents. Using base isolation technology to protect these mechanics could be an appropriate solution to resist seismic excitations thanks to low cost and non-modifying designs. The principle in rolling type bearing is simple. The following sketch shows a visual representation of the rolling type mechanism. In this sketch, the roller is laid on a slope. If the roller leaves its equilibrium position, it can go back to the minimal potential energy position due to the weight coming from top loading. The mechanism of rolling type bearings will minimise the seismic excitation on the interested instruments. One of the commercial applications of rolling type bearings has been introduced by WorkSafe technology. The WorkSafe base isolation technology is claimed to be the most effective way to protect mission-critical and expensive electronic equipment. WorkSafe uses a patented geometry-specific isolation bearing to decouple the equipment (or any structure) from damaging ground motions. The bearing is 100% gravity restoring which means that after the shaking stops, it will smoothly return to its original location. The bearing also works as a white-noise filter virtually eliminating the transfer of seismic vibrations into sensitive components. If all other peripheral systems, (such as power), stay up and running, the isolated equipment could continue to operate and process data right on through a major earthquake. Reference: “Engineering village” online database, Elsevier Engineering Information Inc., Hoboken, New Jersey, U.S.A. http://www.worksafetech.com