Download 1 - 0 ... August 1986

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Document related concepts

Waveform graphics wikipedia, lookup

Register renaming wikipedia, lookup

Transcript
machine (see the SET SLOT command). The options for this set command
are:
0APPLE-COM
The old Apple communication card (300 bits per second).
Note:
This device driver has not been tested and may
not work
properly.
0MICROMODEM
The D.C. Hayes Micromodem ][ (300 bits per
second) and
Micromodem //e (300 and 1200 bits per second).
0SSM
SSM A10 serial interface card.
0SUPER-SERIAL
The Apple Super Serial Card (300-19.2 bits per
second).
Also
works for Practical Peripherals SERIALL.
0NOVATION-CAT
Novation Apple Cat ][ (300 and 1200 bits per second).
Note:
This device driver has not been tested and may
not work
properly.
-SET EIGHT-BIT-QUOTING
0Syntax: SET EIGHT-BIT-QUOTING ON or OFF
0This command will turn on or turn off the eight-bit-quoting feature. If
set ON,
it forces KERMIT-A2 to use eight-bit-quoting which may be handy if
it must
receive a text file in which some or all of the characters are not in
negative
ASCII. The command takes ON or OFF as options.
-SET EMULATION
0Syntax: SET EMULATION ON or OFF
0Specify whether KERMIT-A2 should use its built-in software
facility for
emulating a full-screen terminal. If EMULATION is ON, the type of
terminal must
be specified by the SET TERMINAL-TYPE command.
Section 8 -- APPLE-DOS Kermit for the
Apple ][
1180
Kermit File Transfer
Package
SET ESCAPE-CHARACTER
0Syntax: SET ESCAPE-CHARACTER hexadecimal-number
0Specify the control character you want to use to "escape" from
remote
connections back to KERMIT-A2. The default is 5 (Control-E). The
number is the
hex value of the ASCII control character, 1 to 37, for instance 2 is
Control-B.
-SET FILE-TYPE
0Syntax: SET FILE-TYPE keyword