* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download File
Survey
Document related concepts
State of matter wikipedia , lookup
Atomic orbital wikipedia , lookup
Franck–Condon principle wikipedia , lookup
Rotational spectroscopy wikipedia , lookup
Ionic compound wikipedia , lookup
Rotational–vibrational spectroscopy wikipedia , lookup
Metastable inner-shell molecular state wikipedia , lookup
Rutherford backscattering spectrometry wikipedia , lookup
Molecular orbital wikipedia , lookup
Homoaromaticity wikipedia , lookup
Hydrogen-bond catalysis wikipedia , lookup
Aromaticity wikipedia , lookup
Electron configuration wikipedia , lookup
Transcript
MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL BONDING UNIT 2 – EDEXCEL NOTES SHAPES OF MOLECULES MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL DOT AND CROSS DIAGRAM TO EXPLAIN SHAPE Beryllium chloride, BCl2 Boron trifluoride, BF3 There are three bonding pairs (electron area in a bond); these will spread the maximum distance apart - that is at an angle of 120o. This molecule is flat, that is it lies in a plane; such a molecule is said to be planar. With three bonds at an angle of 120o BF3 is said to be trigonal planar. This molecule is flat, that is it lies in a plane; such a molecule is said to be planar. With three bonds at an angle of 120o BF3 is said to be trigonal planar. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Phosphorus pentachloride, PCl5 Sulphur hexafluoride, SF6 Effect of multiple bonds on bond strength and length. Nuclei joined by multiple (i.e. double and triple) bonds have a greater electron density between them. This causes a greater force of attraction between the nuclei and the electrons between them, resulting in a shorter bond length and greater bond strength MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL So in multiple bonded compounds we just ignore the double or triple bond and just take it as a single covalent bond to work out the number of electron pairs around the central atom: i.e. VALENCE SHELL ELECTRON PAIR REPULSION THEORY (VSEPR) – States that: Electron pairs repel as far apart as possible LPLP > LPBP > BPBP Where Lp = lone pair Bp = Bond pair > = more than MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL HOW TO EXPLAIN SHAPE 1. State number of bonding pairs and lone pairs of electrons. 2. State that electron pairs repel and try to get as far apart as possible (or to a position of minimum repulsion.) 3. If there are no lone pairs state that the electron pairs repel equally 4. If there are lone pairs of electrons, then state that lone pairs repel more than bonding pairs. 5. State actual shape and bond angle. Remember: lone pairs repel more than bonding pairs and so reduce bond angles (by about 2.5o per lone pair in above examples) Ammonia, NH3 Water, H2O MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Bond angles in CH4, NH3, H2O It is important to note that although there are four pairs of electrons arranged approximately tetrahedrally around the N in NH3 and the O in H2O, the lone pairs cannot be “seen” experimentally, so the shapes of these molecules are described by the actual positions of the atoms: ammonia is pyramidal and water is bent. We can explain the differences in the bond angles in CH4, NH3 and H2O by noting that repulsions get less along the series: lone pair/lone pair > lone pair/bonding pair > bonding pair/bonding pair This occurs because a lone pair is closer to the nucleus of the atom, and so takes up more room than a bonding pair. When this principle is applied to CH4, NH3 and H2O, CH4 is a regular tetrahedron (angles of 109.5o); NH3 has one lone pair, which squashes the H atoms down (angles reduced to 107o); and H2O has two lone pairs, which repel the H atoms even more (angle now 104.5o): O N H H H H H ammonia – pyramidal water: non-linear bond angle 107o bond angle 104.5o More complicated molecules The shapes of more complicated molecules and ions can also be “explained” by electron pair repulsion theory, or EPR. In applying this principle, we must include both bonding and non-bonding (or “lone”) pairs, and we must count a double or triple bond as if it were one pair (or one region of electron density). The table shows the shapes expected for different numbers of electron pairs. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL We can use advanced EPR theory to predict the shape of any molecule or ion. 1. Decide on the central atom 2. Count the number of bonding atoms 3. If the species is – charged 4. If the species is + charged 5. Find the total number of electron pairs. 6. Determine the shape of the species; Pairs Record its number of outer electrons Add 1 e- for each atom Add 1 e- for each charge Subtract 1 e- for each charge Shape 2 Linear 3 Trigonal Planar 4 Tetrahedral 6 Octahedral 5 Trigonal bipyramidal 7. Show any lone pairs. The number of Lone pairs = Total number of pairs – bonding pairs Example Electrons PH4+ Central atom =P 5 Bonding atoms = 4 x H 4 (Forms 4 bonding pairs) Positively charged -1 Total = 8 4 pairs = Tetrahedral The number of Lone pairs = Total number of pairs – bonding pairs = 4-4 = 0 MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Example Electrons IF4- Central atom =I 7 Bonding atoms = 5 x F 4 ( Forms 4 bonding pairs) Negatively charged +1 Total = 12 6 pairs = Octahderal The number of Lone pairs = Total number of pairs – bonding pairs = 6-4 = 2 Carbon Allotropes Macromolecular: diamond Tetrahedral arrangement of carbon atoms. 4 covalent bonds per atom This structure, held together by strong covalent bonds, is very difficult to break apart. So diamond has very high melting and boiling points. It is the hardest natural substance. Diamonds are attractive which means they are used as jewellery. Its hardness makes it useful for cutting instruments such as drill tips. Diamond cannot conduct electricity because all 4 electrons per carbon atoms are involved in covalent bonds. They are localised and cannot move MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Macromolecular: Graphite Planar arrangement of carbon atoms in layers. 3 covalent bonds per atom in each layer. 4th outer electron per atom is delocalised. Delocalised electrons between layers. Graphite can conduct electricity well between layers because one electron per carbon is free and delocalised, so electrons can move easily along layers. It does not conduct electricity between layers because the energy gap between layers is too large for easy electron transfer. Since three bonds form, the bond angle around each carbon is 120o and a hexagonal arrangement is set up. These hexagons join together in a plane forming a sheet of hexagonally arranged carbon atoms. Graphite is made up of these layers held together by London forces (Van der Waals' forces). Sometimes it is referred to as a layer structure. The carbon atoms in graphite are held together by covalent bonds forming a giant structure, so the melting and boiling points are high. Since each atom has a free electron, graphite is able to conduct electricity. The layers held together by weak intermolecular forces can slide over each other, making a soft slippery substance. Graphite can be used for electrodes as it is a conductor, and unlike metals it does not react during electrolysis. It can be used as a lubricant because of its slippery nature. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Carbon nanotubes Another form of carbon developed as a result of the discovery of fullerenes is the nanotube. The individual layers in graphite are called graphemes. A nanotube can be regarded as a grapheme which has rolled up to form a cylinder. The name comes from the diameter of the cylinder. A singlewalled carbon nanotube is a one-atom thick sheet of graphite rolled up into a seamless cylinder with diameter 1-2 nm. These have very high tensile strength because of the strong structure of many strong covalent bonds Such cylindrical carbon molecules have novel properties that make them potentially useful in many applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. Nanotubes can conduct electricity well along the tube because one electron per carbon is free and delocalised, so electrons can move easily along the tube. Nanotubes have potentially many uses. One being the potential to us as vehicles to deliver drugs to cells. There are delocalized electrons in buckminsterfullerene. Fullerenes These molecules resembled the construction of a building by an architect called Buckminster Fuller. As a result, the molecule was named buckminsterfullerene. The molecule also resembles a football, so it is often called a “bucky-ball”. Similar molecules have since been made that contain 70 or more carbon atoms. This family of molecules are called fullerenes. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Electronegativity and intermediate bonding Electronegativity is defined as follows Electronegativity is the ability of an atom within a covalent bond to attract the bonding pair of electrons. Electronegativity is measured on the Pauling scale (ranges from 0 to 4 F, O, N and Cl are the most electronegative atoms The most electronegative element is fluorine and it is given a value of 4.0 The table below shows electronegativity values of main block elements Factors affecting electronegativity Electronegativity increases across a period as the number of protons increases and the atomic radius decreases because the electrons in the same shell are pulled in more. It decreases down a group because the distance between the nucleus and the outer electrons increases and the shielding of inner shell electrons increases Intermediate bonding Ionic and covalent bonding are the extremes of a continuum of bonding type. Differences in electronegativity between elements can determine where a compound lies on this scale A compound containing elements of similar electronegativity and hence a small electronegativity difference will be purely covalent A compound containing elements of very different electronegativity and hence a very large electronegativity difference (> 1.7) will be ionic Formation of a permanent dipole – (polar covalent) bond A polar covalent bond forms when the elements in the bond have different electronegativities . (Of around 0.3 to 1.7) When a bond is a polar covalent bond it has an unequal distribution of electrons in the bond and produces a charge separation, (dipole) δ+ δ- ends The element with the larger electronegativity in a polar compound will be the δ- end H+ – Cl- MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL MORE ON INTERMEDIATE BONDING In Unit 1 (Ionic Bonding) it was noted that ionic compounds can be polarized which gives them a covalent character. When a molecule has a polar bond, it gives the covalent substance an ionic character. To regard a compound as “covalent” or “ionic” is too simplistic for understanding AS chemistry. It is more correct to visualize type of bonding on a sliding scale where compounds can be described as “predominantly covalent” or “predominantly ionic”. Electronegativity values can be used to give an approximate idea of the predominant type of bonding in a binary compound Looking at a selection of substances If these are then plotted on the diagram below, it can be seen the type of bonding is a continuum rather than a black and white picture. Polarisation of a covalent bond A perfect covalent bond would consist of the bonding electron region being shared equally by each atom. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL This occurs if each of the atoms have the same pull on the electron pair in the bond (equal electronegativity). It can be found in molecules of elements such as O2, Br2 and N2. Since the atoms in each of these molecules are the same they will have the same electronegativity. In most compounds however one atom will have a greater electronegativity than the other, and so will have a greater pull on the electrons, so distorting the electron region. This process of moving away from the perfect example is called polarisation. The extent of the polarisation will depend on the difference in electronegativity of the two atoms. The polarisation of a covalent bond will mean that one part of the molecule is more negative (the most electronegative atom) than the other and causing the bond to be polar. Hydrogen chloride is an example of a molecule which contains a polar bond. The chlorine possesses a higher electronegativity, so will draw the electron pair in the covalent bond towards itself. Polar and Non Polar molecules Symmetric molecules A symmetric molecule (all bonds identical and no lone pairs) will not be polar even if individual bonds within the molecular ARE polar. The individual dipoles on the bonds ‘cancel out’ due to the symmetrical shape of the molecule. There is no NET dipole moment: the molecule is NON POLAR e.g. CCl4 will be non-polar whereas CH3Cl will be polar MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL The individual dipoles on the bonds ‘cancel out’ due to the symmetrical shape of the molecule. There is no NET dipole moment: the molecule is NON POLAR e.g. CCl4 will be non-polar whereas CH3Cl will be polar Experiment effect of charged rod on polar/non-polar liquids In this experiment, a charged rod (formed by rubbing a plastic rod) is brought close to a jet of liquid flowing from a burette. If the liquid is polar, the jet of liquid will be attracted to the electrostatic force of the rod. The dipoles in the polar molecules will all align and the negative end δ- will be attracted to the positive rod (or vice versa). The stronger the dipole the more the deflection of the jet. Non-polar liquids will not be deflected and attracted to the charged rod Intermolecular Forces London Forces London forces occur between all molecular substances and noble gases. They do not occur in ionic substances London Forces are also called instantaneous, induced dipole dipole interactions. They occur between all simple covalent molecules and the separate atoms in noble gases. In any molecule the electrons are moving constantly and randomly. As this happens the electron density can fluctuate and parts of the molecule become more or less negative i.e. small temporary or transient dipoles form. These temporary dipoles can cause dipoles to form in neighbouring molecules. These are called induced dipoles. The induced dipole is always the opposite sign to the original one. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL London Forces Continued Main factor affecting size of London Forces The more electrons there are in the molecule the higher the chance that temporary dipoles will form. This makes the London forces stronger between the molecules and more energy is needed to break them so boiling points will be greater The increasing boiling points of the halogens down the group 7 series can be explained by the increasing number of electrons in the bigger molecules causing an increase in the size of the London forces between the molecules. This is why I2 is a solid whereas Cl2 is a gas. The increasing boiling points of the alkane homologous series can be explained by the increasing number of electrons in the bigger molecules causing an increase in the size of the London forces between molecules. The shape of the molecule can also have an effect on the size of the London forces. Long straight chain alkanes have a larger surface area of contact between molecules for London forces to form than compared to spherical shaped branched alkanes and so have stronger London forces . Boiling points of the noble gases The boiling points of the noble gases illustrate this increase in strength of Van der Waal's forces with molecular mass. Noble gas Neon Argon Krypton Xenon Radon Molecular mass 20 40 84 131 222 Boiling point -246 -186 -152 -108 -62 As the molecular mass of the gases increases, the atoms contain more electrons and so the size of the van der Waal’s forces increases. As the attractive forces between the molecules increases, it becomes more difficult to separate the molecules from each other and so the boiling points increase. Permanent dipole-dipole bonding Permanent dipole-dipole bonding occurs between polar molecules It is stronger than van der waals and so the compounds have higher boiling points Polar molecules have a permanent dipole. (commonly compounds with C-Cl, C-F, C-Br H-Cl, C=O bonds) Polar molecules are asymmetrical and have a bond where there is a significant difference in electronegativity between the atoms. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Permanent dipole bonding occurs in addition to London forces It has been seen that in a molecule such as trichloromethane, CHCl3, the electronic charge is pulled towards the chlorine atoms because they have a greater electronegativity This results in a molecule which has a partial positive charge at one end and a partial negative charge at the other. This type of molecule is described as polar. The separation of charge which exists in a polar molecule is called a dipole. In a polar material there is an attraction between the positive charge in one molecule and the negative charge in the other. This type of force between molecules is referred to as dipole-dipole attractions. Hydrogen bonding It occurs in compounds that have a hydrogen atom attached to one of the three most electronegative atoms of nitrogen, oxygen and fluorine, which must have an available lone pair of electrons. e.g. a –O-H -N-H F- H bond. There is a large electronegativity difference between the H and the O,N,F Examples of hydrogen bonding Always show the lone pair of electrons on the O,F,N and the dipoles and all the δ - δ + charges Hydrogen bonding occurs in addition to London forces The hydrogen bond should have a bond angle of 180o with one of the bonds in one of the molecules Hydrogen fluoride The bond angle is 180O around the H atom because there are two pairs of electrons around the H atom involved in the hydrogen bond. These pairs of electrons repel to a position of minimum repulsion, as far apart as possible. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Hydrogen Bonding cont…. Alcohols, carboxylic acids, proteins, amides all can form hydrogen bonds Hydrogen bonding is stronger than the other two types of intermolecular bonding. Water Water can form two hydrogen bonds per molecule, because the electronegative oxygen atom has two lone pairs of electrons on it. It can therefore form stronger hydrogen bonding and needs more energy to break the bonds, leading to a higher boiling point. The anomalously high boiling points of H2O, NH3 and HF are caused by the hydrogen bonding between these molecules in addition to their London forces. The additional forces require more energy to break and so have higher boiling points The general increase in boiling point from H2S to H2Te or from HCl to HI is caused by increasing London forces between molecules due to an increasing number of electrons. Intermolecular forces and physical properties The greater the intermolecular force strength, the more difficult it is to separate the molecules and so the higher the melting and boiling points. The strengths of the intermolecular forces are summarized below. The three molecules below illustrate the various strengths of these intermolecular forces. Propane is composed of non-polar molecules and so only has van der Waals forces between the molecules. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Methoxymethane has a similar molecular mass to propane, but has a higher boiling point because the molecules are polar, so there are dipole-dipole attractions as well as van der Waals forces. Ethanol has hydrogen bonding which is significantly stronger than the other intermolecular forces and so a much higher boiling point than methoxymethane even though they have the same molecular mass. Boiling Points of the Alkanes A graph plotting the boiling points of the alkanes is shown below. The boiling points of the alkanes increases with molecular mass. This happens because the higher the molecular mass, the greater the number of electrons and so the greater the chance of an imbalance and formation of an instantaneous dipole. The van der Waals’ forces (London forces) increase. The melting point of the alkanes increases with molecular mass for the same reason, but the pattern is not so straightforward as the different packing of molecules in the solid according to whether the number of carbon atoms is odd or even causes an additional factor in the determination of the melting points. The closer the molecules are able to approach each other, the greater the induction effect and so the greater the van der Waals’ forces. When an alkane has branching present, the molecules cannot approach each other so closely and there is less area over which contact can occur, so branched alkanes have lower boiling points. The table below illustrates the effect of branching in alkane molecules on the boiling point. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Boiling Points of the alcohols The –OH group in alcohols causes hydrogen bonding between the molecules. Therefore an alcohol will have a much higher boiling point than an alkane with a similar number of electrons. Boiling Points of the hydrogen halides The boiling points of HCl, HBr and HI increase with molecular mass. This is because as the number of electrons increases so does the chance of an electron imbalance and the formation of instantaneous dipoles and so greater van der Waals’ or London forces. It might be expected that HF having a smaller molecular mass than HCl would have a lower boiling point. This is not the case. Hydrogen fluoride has the highest boiling point of this group because HF molecules form hydrogen bonds. The graph plotting the boiling points of hydrogen halides is shown below. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Solvents and Solubility Solubility of a solute in a solvent is a complicated balance of energy required to break bonds in the solute and solvent against energy given out making new bonds between the solute and solvent. Ionic substances dissolving in water When an ionic lattice dissolves in water it involves breaking up the bonds in the lattice and forming new bonds between the metal ions and water molecules. The negative ions are attracted to the δ+ hydrogens on the polar water molecules and the positive ions are attracted to the δ - oxygen on the polar water molecules. The higher the charge density the greater the hydration enthalpy (e.g. smaller ions or ions with larger charges) as the ions attract the water molecules more strongly. In general a solvent will dissolve a substance that contains similar intermolecular forces. When an ionic substance is placed in water, the water molecules, being highly polar, are attracted to the ions. The oxygen in the water molecule carries a partial negative charge and is attracted to cations. The hydrogen in the water molecule carries a partial positive charge and is attracted to anions. The process of water molecules linking to ions is called hydration of ions (as bonds are formed hydration is always exothermic). The water molecules are vibrating, so as they bond to the ions they shake the ions free from the lattice. The process of dissolving is shown below. Some ionic compounds do not dissolve in water because the electrostatic attraction between the ions, the Lattice enthalpy, is too great for the water molecules to overcome. To be soluble the energy produced by hydrating the ions (the hydration enthalpy) must be more negative than the energy holding the ion together (the lattice enthalpy). MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL Solubility of simple alcohols The smaller alcohols are soluble in water because they can form hydrogen bonds with water. The longer the hydrocarbon chain the less soluble the alcohol. To be soluble in water the organic substance must be able to form strong hydrogen bonds with the water molecules. Insolubility of compounds in water Compounds that cannot form hydrogen bonds with water molecules, e.g. polar molecules such as halogenoalkanes or non polar substances like hexane will be insoluble in water. Solubility in non-aqueous solvents To be soluble in a non-aqueous solvent the substance must have similar strength intermolecular forces to those in the non-aqueous solvent. Non-polar solvents will dissolve non-polar materials. Solvents such as hexane will dissolve substances such as iodine. Hexane and iodine are both non-polar and so have similar forces between their molecules (van der Waals forces). This means that the molecules are able to interact with each other easily and allow solubility. Non-polar solutes will dissolve in non-polar solvents. e.g. Iodine which has only London forces between its molecules will dissolve in a non polar solvent such as hexane which also only has London forces. Propanone is a useful solvent because it has both polar and non polar characteristics. It can form London forces with some non polar substances such as octane with its CH3 groups. Its polar C=O bond can also hydrogen bond with water. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL An ionic bond will show tendencies to have some degree of covalent character if:i) ii) iii) iv) The size of the cations is small The charge on the cation is large The anionic radius is large The charge on the anion is large E.g. LiI Has a small cationic radius therefore a high charge density Has a large anionic radius Li+ I- The cation radius is very small therefore it has a high charge density so it will attract the electron cloud of the large I- ion more towards itself rather than its own nucleus therefore the electron cloud of the I- ion is distorted therefore this bond shows a degree of covalent character When the electron cloud on a negative ion is distorted in this way we say that the negative ion is POLARISED. In this case the I- ion is polarised, and that the Li+ causes this polarisation. Hence the smaller the cationic radius the greater or larger the charge, the greater the charge density therefore the more polarisation they cause And the larger the anionic radius or the larger the charge on the anion the more polarisable they are. MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL MISS CHOHANS NOTES ON BONDING UNIT 2 EDEXCEL