Download catalogue - Rolling stock repair machinery

MILLING MACHINE FB-01
for machining of freight wagon bogie bolster center plate
Function
The milling machine is used for machining in freight wagon bogie
bolster (under the roundhouse servicing):
- center plate bearing and thrust surfaces and edge cutting
(machining performs by milling units);
- center pivot aperture or bush hole under repair (by hole enlarging
countersink).
Technical data
Machining time, hour
Miller number of revolutions, rev/min
Checker filling number of revolutions, rev/min
Vertical feed dimension, mm/min
Total installed power, kW
Bolster force clamp
Dimensional specifications, mm
Mass, kg
0,8
500
0,5
0,5-2
10
Screw
2800х1700х2200
2600
Completed units
The delivery set includes the tools: milling units for machining on depths: 25, 30, 36 mm
Additional packaging arrangement: countersink Ø55 mm, countersink Ø78 mm
MILLING MACHINE FB-02/2
for simultaneous machining of two freight wagon bogie bolster bevels
Function
The milling machine is used for milling of freight wagon bogie bolster
bevels (under the roundhouse servicing).
After restorative surfacing bevels treats by miller at the expense of
spindle heads traveling independently of each other and setting
implement turn on 90 degrees.
Technical data
Productivity, piece/ hour
Spindle heads slide blocks travel, mm
Quill travel, mm
Spindles revolution frequency, rev/min
Total installed power, kW
Dimensional specifications, mm
Mass, kg
3
440
50
500
13
3470х2000х1730
3100
Completed units
The delivery set includes the tools: miller Ø109 mm in quantity 2 pieces.
MILLING MACHINE FB-03/2
for simultaneous machining of two freight wagon bogie side frame jaw pedestals
Function
The milling machine is used for simultaneous machining of freight
wagon bogie side frame jaw pedestals under the roundhouse
servicing. Machining performs at the expense of slide blocks travel
with spindle heads fitted out by three millers independently of each
other.
Technical data
Machining time, hour
Slide blocks travel, mm
Millers revolution frequency, rev/min
Total installed power, kW
Frame force clamp
Dimensional specifications, mm
Mass, kg
0,5
900
200
32,2
Screw
3000х3000х1800
7300
Completed units
The delivery set includes the tools: miller Ø175 mm in quantity 4 pieces, miller Ø 250 mm in quantity 2
pieces.
MILLING MACHINE FB-06
for repair freight wagon bogie bolster bearings on A.STUCKI company technology
Function
The milling machine is used for repair worn freight wagon bogie
bolster bearings on A.STUCKI company technology. Surfaces which
remain after bearings cutting are treated at an angle. Surfaces of
plates which built-up on treated surface are treated horizontally by
millers which set in milling heads spindles. Machining is performs on
two sides of a bolster.
Technical data
Slide blocks travel, mm
Quill travel, mm
Spindles revolution frequency, rev/min
Total installed power, kW
Dimensional specifications, mm
Mass, kg
650
50
430
17,2
3200х2000х1850
3800
Completed units
The delivery set includes the tools: miller Ø109 mm in quantity 2 pieces.
TOOLS
Milling unit
It is applied on the machine FB-01
Milling unit is consists of: miller set Ø175 mm - 1 piece, Ø109,5 mm - 2 pieces,
checker filling with knife - 1 piece, adaptors: 25, 30, 36 mm - 2 pieces.
(Adaptors of different height allow performing machining of bolsters any type).
On the millers are set carbide blades of type MC 221 LNUX301940 TN 02P
Miller Ø 109,5 mm
It is applied on the machines FB-01, FB-02, FB-02/2
On the miller is set carbide blade of type MC 221 LNUX301940 TN 02P
Miller Ø 175 mm
It is applied on the machine FB-03
On the miller is set carbide blades of type MC 221 LNUX301940 TN02P
Miller Ø 250 mm
It is applied on the machine ФБ-03
On the miller is set carbide blades of type MC 221 LNUX301940 TN02P
Countersink Ø 78 mm
It is applied for machining of center pivot aperture for repair bush on machine
FB-01
On the countersink is set carbide blades of type TNMG 220416 – MR (CT35M),
TNMG 270608 – MR (CT35M)
Countersink Ø 55,5 mm
It is applied for machining of center pivot aperture on machine FB -01
On the countersink is set carbide blades of type TNMG 160408-MR (CT35M) и
MC 221 LNUX301940 TN 02P