Download induced current

Chapter 22
Electromagnetic
Induction
22.1 Induced Emf and Induced Current
There are a number of ways a magnetic field can be used to
generate an electric current.
It is the changing field that produces the current.
22.1 Induced Emf and Induced Current
The current in the coil is called the induced current because it is brought
about by a changing magnetic field.
Since a source emf is always needed to produce a current, the coil behaves
as if it were a source of emf. This emf is known as the induced emf.
22.1 Induced Emf and Induced Current
An emf can be induced by changing the
area of a coil in a constant magnetic field
In each example, both an emf and a current are induced because
the coil is part of a complete circuit. If the circuit were open, there
would be no induced current, but there would be an induced emf.
The phenomena of producing an induced emf with the aid of a
magnetic field is called electromagnetic induction.
22.2 Motional Emf
THE EMF INDUCED IN A MOVING CONDUCTOR
Each charge within the conductor
is moving and experiences a
magnetic force
F  qvB
The separated charges on the
ends of the conductor give rise
to an induced emf, called a
motional emf.
22.2 Motional Emf
Motional emf when v, B,
and L are mutually
perpendicular
E  vBL
22.2 Motional Emf
Example 1 Operating a Light Bulb with Motional Emf
Suppose the rod is moving with a speed of 5.0m/s
perpendicular to a 0.80-T magnetic field. The rod
has a length of 1.6 m and a negligible electrical
resistance. The rails also have a negligible
electrical resistance. The light bulb has a
resistance of 96 ohms. Find (a) the emf produced
by the rod and (b) the current induced in the
circuit.
22.2 Motional Emf
(a)
(b)
E  vBL  5.0 m s0.80 T1.6 m  6.4 V
E 6.4 V
I 
 0.067 A
R 96
22.2 Motional Emf
MOTIONAL EMF AND ELECTRICAL ENERGY
In order to keep the rod moving at constant velocity, the force
the hand exerts on the rod must balance the magnetic force on
the current:
Fhand  F  ILB
22.2 Motional Emf
The direction of the force in this figure would violate the
principle of conservation of energy.
22.2 Motional Emf
Conceptual Example 3 Conservation of Energy
A conducting rod is free to slide down between
two vertical copper tracks. There is no kinetic
friction between the rod and the tracks. Because
the only force on the rod is its weight, it falls with
an acceleration equal to the acceleration of
gravity.
Suppose that a resistance connected between the
tops of the tracks. (a) Does the rod now fall with
the acceleration of gravity? (b) How does the
principle of conservation of energy apply?
22.3 Magnetic Flux
MOTIONAL EMF AND MAGNETIC FLUX
 x  xo 
 xL  xo L 
 A  Ao 
BA   BAo
 BL  
 B  
 B 
E  vBL  
t  to
 t  to 
 t  to 
 t  to 
magnetic flux
  BA
22.3 Magnetic Flux
   o 
E

t  to
t
22.3 Magnetic Flux
GENERAL EXPRESSION FOR MAGNETIC FLUX
  BA cos 
22.3 Magnetic Flux
  BA cos 
22.3 Magnetic Flux
GRAPHICAL INTERPRETATION OF MAGNETIC FLUX
The magnetic flux is proportional
to the number of field lines that pass
through a surface.
22.4 Faraday’s Law of Electromagnetic Induction
FARADAY’S LAW OF ELECTROMAGNETIC INDUCTION
The average emf induced in a coil of N loops is
   o 

   N
E   N 
t
 t  to 
SI Unit of Induced Emf: volt (V)
22.4 Faraday’s Law of Electromagnetic Induction
Example 5 The Emf Induced by a Changing Magnetic Field
A coil of wire consists of 20 turns each of which has an area of 0.0015 m2.
A magnetic field is perpendicular to the surface. Initially, the magnitude of
the magnetic field is 0.050 T and 0.10s later, it has increased to 0.060 T.
Find the average emf induced in the coil during this time.
BA cos   Bo A cos 

E  N
 N
t
t
0.060 T  0.050 T
 B  Bo 
2
  NA cos  
  20 0.0015 m cos0
0.10 s
 t 
 3.0 10 3 V


22.4 Faraday’s Law of Electromagnetic Induction
Conceptual Example 7 An Induction Stove
Two pots of water are placed on an induction stove at the same time.
The stove itself is cool to the touch. The water in the ferromagnetic
metal pot is boiling while that in the glass pot is not. How can such
a cool stove boil water, and why isn’t the water in the glass pot boiling?
22.5 Lenz’s Law
LENZ’S LAW
The induced emf resulting from a changing magnetic flux has a
polarity that leads to an induced current whose direction is such
that the induced magnetic field opposes the original flux change.
22.5 Lenz’s Law
LENZ’S LAW
The induced emf resulting from a changing magnetic flux has a
polarity that leads to an induced current whose direction is such
that the induced magnetic field opposes the original flux change.
Reasoning Strategy
1. Determine whether the magnetic flux that penetrates the coil
is increasing or decreasing.
2. Find what the direction of the induced magnetic field must be
so that it can oppose the change influx by adding or subtracting
from the original field.
3. Use RHR-2 to determine the direction of the induced current.
22.5 Lenz’s Law
Conceptual Example 8 The Emf Produced by a Moving Magnet
A permanent magnet is approaching a
loop of wire. The external circuit consists
of a resistance. Find the direction of the
induced current and the polarity of
the induced emf.
22.6 Applications of Electromagnetic Induction to the Reproduction of Sound
22.6 Applications of Electromagnetic Induction to the Reproduction of Sound
22.6 Applications of Electromagnetic Induction to the Reproduction of Sound
22.7 The Electric Generator
HOW A GENERATOR PRODUCES AND EMF
22.7 The Electric Generator
E  v BL  BLv sin 
v  r 
W

2
22.7 The Electric Generator
Emf induced in a rotating planar coil
E  NAB sin t  Eo sin t
  2 f
22.7 The Electric Generator
E  Eo sin t
22.7 The Electric Generator
THE ELECTRICAL ENERGY DELIVERED BY A GENERATOR
AND THE COUNTERTORQUE
When the generator is delivering current, there is a magnetic force
acting on the coils.
22.7 The Electric Generator
The magnetic force gives rise to a
countertorque that opposes the
rotational motion.
22.7 The Electric Generator
THE BACK EMF GENERATED BY AN ELECTRIC MOTOR
When a motor is operating, two sources of emf are present: (1) the
applied emf V that provides current to drive the motor, and (2) the
emf induced by the generator-like action of the rotating coil.
22.7 The Electric Generator
Consistent with Lenz’s law, the induced emf acts to oppose the
applied emf and is called back emf.
V E
I
R
22.7 The Electric Generator
Example 12 Operating a Motor
The coil of an ac motor has a resistance of 4.1 ohms. The motor is
plugged into an outlet where the voltage is 120.0 volts (rms), and the coil
develops a back emf of 118.0 volts (rms) when rotating at normal
speed. The motor is turning a wheel. Find (a) the current when the
motor first starts up and (b) the current when the motor is operating at
normal speed.
(a)
V  E 120 V  0 V
I

 29 A
R
4.1
(b)
V  E 120 V  118.0 V
I

 0.49 A
R
4.1
22.8 Mutual Inductance and Self Inductance
MUTUAL INDUCTANCE
The changing current in the primary coil creates a changing
magnetic flux through the secondary coil, which leads to an
induced emf in the secondary coil.
The effect in called
mutual induction.
E  N

t
22.8 Mutual Inductance and Self Inductance
Emf due to mutual induction
Es   M
mutual inductance
SI Unit of mutual inductance:
1V  s A  1 H (Henry)
I p
t
22.8 Mutual Inductance and Self Inductance
SELF INDUCTANCE
The effect in which a changing current in a circuit induces and emf
in the same circuit is referred to as self induction.
22.8 Mutual Inductance and Self Inductance
I
E  L
t
self inductance
SI Unit of self inductance:
1V  s A  1 H (Henry)
22.8 Mutual Inductance and Self Inductance
THE ENERGY STORED IN AN INDUCTOR
Energy stored in
an inductor
Energy density
Energy  12 LI 2
Energy density 
1
2o
B2
22.9 Transformers
A transformer is a device for increasing or decreasing an ac
voltage.
Es   N s

t

Ep   N p
t
Es Ns

Ep N p
22.9 Transformers
Transformer
equation
Vs N s

Vp N p
22.9 Transformers
I s Vp N p


I p Vs N s
A transformer that steps up the voltage simultaneously steps
down the current, and a transformer that steps down the voltage
steps up the current.
22.9 Transformers