* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Lecture_14
Survey
Document related concepts
Transcript
Chapter 16 Sound Copyright © 2009 Pearson Education, Inc. Units of Chapter 16 Sections – 2, 4, 6, 7 only • Mathematical Representation of Longitudinal Waves • Sources of Sound: Vibrating Strings • Quality of Sound, and Noise; Superposition • Interference of Sound Waves; Beats • Doppler Effect Copyright © 2009 Pearson Education, Inc. 16-2 Mathematical Representation of Longitudinal Waves Longitudinal waves are often called pressure waves. The displacement is 90° out of phase with the pressure. Copyright © 2009 Pearson Education, Inc. 16-2 Mathematical Representation of Longitudinal Waves By considering a small cylinder within the fluid, we see that the change in pressure is given by (B is the bulk modulus): Copyright © 2009 Pearson Education, Inc. 16-2 Mathematical Representation of Longitudinal Waves If the displacement is sinusoidal, we have where and Copyright © 2009 Pearson Education, Inc. 16-5 Quality of Sound, and Noise; Superposition So why does a trumpet sound different from a flute? The answer lies in overtones—which ones are present, and how strong they are, makes a big difference. The sound wave is the superposition of the fundamental and all the harmonics. Copyright © 2009 Pearson Education, Inc. 16-5 Quality of Sound, and Noise; Superposition This plot shows frequency spectra for a clarinet, a piano, and a violin. The differences in overtone strength are apparent. Copyright © 2009 Pearson Education, Inc. 16-6 Interference of Sound Waves; Beats Sound waves interfere in the same way that other waves do in space. Copyright © 2009 Pearson Education, Inc. 16-6 Interference of Sound Waves; Beats Example 16-12: Loudspeakers’ interference. Two loudspeakers are 1.00 m apart. A person stands 4.00 m from one speaker. How far must this person be from the second speaker to detect destructive interference when the speakers emit an 1150-Hz sound? Assume the temperature is 20°C. Copyright © 2009 Pearson Education, Inc. 16-6 Interference of Sound Waves; Beats Waves can also interfere in time, causing a phenomenon called beats. Beats are the slow “envelope” around two waves that are relatively close in frequency. Copyright © 2009 Pearson Education, Inc. 16-6 Interference of Sound Waves; Beats If we consider two waves of the same amplitude and phase, with different frequencies, we can find the beat frequency when we add them: This represents a wave vibrating at the average frequency, with an “envelope” at the difference of the frequencies. Copyright © 2009 Pearson Education, Inc. 16-6 Interference of Sound Waves; Beats Example 16-13: Beats. A tuning fork produces a steady 400-Hz tone. When this tuning fork is struck and held near a vibrating guitar string, twenty beats are counted in five seconds. What are the possible frequencies produced by the guitar string? Copyright © 2009 Pearson Education, Inc. 16-7 Doppler Effect The Doppler effect occurs when a source of sound is moving with respect to an observer. A source moving toward an observer appears to have a higher frequency and shorter wavelength; a source moving away from an observer appears to have a lower frequency and longer wavelength. Copyright © 2009 Pearson Education, Inc. 16-7 Doppler Effect If we can figure out what the change in the wavelength is, we also know the change in the frequency. Copyright © 2009 Pearson Education, Inc. 16-7 Doppler Effect The change in the frequency is given by: If the source is moving away from the observer: Copyright © 2009 Pearson Education, Inc. 16-7 Doppler Effect If the observer is moving with respect to the source, things are a bit different. The wavelength remains the same, but the wave speed is different for the observer. Copyright © 2009 Pearson Education, Inc. 16-7 Doppler Effect We find, for an observer moving toward a stationary source: And if the observer is moving away: Copyright © 2009 Pearson Education, Inc. 16-7 Doppler Effect Example 16-14: A moving siren. The siren of a police car at rest emits at a predominant frequency of 1600 Hz. What frequency will you hear if you are at rest and the police car moves at 25.0 m/s (a) toward you, and (b) away from you? Copyright © 2009 Pearson Education, Inc. 16-7 Doppler Effect Example 16-15: Two Doppler shifts. A 5000-Hz sound wave is emitted by a stationary source. This sound wave reflects from an object moving toward the source. What is the frequency of the wave reflected by the moving object as detected by a detector at rest near the source? Copyright © 2009 Pearson Education, Inc. 16-7 Doppler Effect All four equations for the Doppler effect can be combined into one; you just have to keep track of the signs! Copyright © 2009 Pearson Education, Inc. Summary of Chapter 16 • Sound is a longitudinal wave in a medium. •The strings on stringed instruments produce a fundamental tone whose wavelength is twice the length of the string; there are also various harmonics present. • Sound waves exhibit interference; if two sounds are at slightly different frequencies they produce beats. • The Doppler effect is the shift in frequency of a sound due to motion of the source or the observer. Copyright © 2009 Pearson Education, Inc. Chapter 31 Maxwell’s Equations and Electromagnetic Waves Copyright © 2009 Pearson Education, Inc. Units of Chapter 31 • Changing Electric Fields Produce Magnetic Fields; Ampère’s Law and Displacement Current • Gauss’s Law for Magnetism • Maxwell’s Equations • Production of Electromagnetic Waves • Electromagnetic Waves, and Their Speed, Derived from Maxwell’s Equations • Light as an Electromagnetic Wave and the Electromagnetic Spectrum Copyright © 2009 Pearson Education, Inc. Units of Chapter 31 • Measuring the Speed of Light • Energy in EM Waves; the Poynting Vector • Radiation Pressure • Radio and Television; Wireless Communication Copyright © 2009 Pearson Education, Inc. 31-1 Changing Electric Fields Produce Magnetic Fields; Ampère’s Law and Displacement Current Ampère’s law relates the magnetic field around a current to the current through a surface. Copyright © 2009 Pearson Education, Inc. 31-1 Changing Electric Fields Produce Magnetic Fields; Ampère’s Law and Displacement Current In order for Ampère’s law to hold, it can’t matter which surface we choose. But look at a discharging capacitor; there is a current through surface 1 but none through surface 2: Copyright © 2009 Pearson Education, Inc. 31-1 Changing Electric Fields Produce Magnetic Fields; Ampère’s Law and Displacement Current Therefore, Ampère’s law is modified to include the creation of a magnetic field by a changing electric field – the field between the plates of the capacitor in this example: Copyright © 2009 Pearson Education, Inc. 31-1 Changing Electric Fields Produce Magnetic Fields; Ampère’s Law and Displacement Current Example 31-1: Charging capacitor. A 30-pF air-gap capacitor has circular plates of area A = 100 cm2. It is charged by a 70-V battery through a 2.0-Ω resistor. At the instant the battery is connected, the electric field between the plates is changing most rapidly. At this instant, calculate (a) the current into the plates, and (b) the rate of change of electric field between the plates. (c) Determine the magnetic field induced between the plates. Assume E is uniform E between the plates at any instant and is zero at all points beyond the edges of the plates. Copyright © 2009 Pearson Education, Inc. 31-1 Changing Electric Fields Produce Magnetic Fields; Ampère’s Law and Displacement Current The second term in Ampere’s law has the dimensions of a current (after factoring out the μ0), and is sometimes called the displacement current: where Copyright © 2009 Pearson Education, Inc. 31-2 Gauss’s Law for Magnetism Gauss’s law relates the electric field on a closed surface to the net charge enclosed by that surface. The analogous law for magnetic fields is different, as there are no single magnetic point charges (monopoles): Copyright © 2009 Pearson Education, Inc. 31-3 Maxwell’s Equations We now have a complete set of equations that describe electric and magnetic fields, called Maxwell’s equations. In the absence of dielectric or magnetic materials, they are: Copyright © 2009 Pearson Education, Inc. 31-4 Production of Electromagnetic Waves Since a changing electric field produces a magnetic field, and a changing magnetic field produces an electric field, once sinusoidal fields are created they can propagate on their own. These propagating fields are called electromagnetic waves. Copyright © 2009 Pearson Education, Inc. 31-4 Production of Electromagnetic Waves Oscillating charges will produce electromagnetic waves: Copyright © 2009 Pearson Education, Inc. 31-4 Production of Electromagnetic Waves Close to the antenna, the fields are complicated, and are called the near field: Copyright © 2009 Pearson Education, Inc. 31-4 Production of Electromagnetic Waves Far from the source, the waves are plane waves: Copyright © 2009 Pearson Education, Inc. 31-4 Production of Electromagnetic Waves The electric and magnetic waves are perpendicular to each other, and to the direction of propagation. Copyright © 2009 Pearson Education, Inc. 31-5 Electromagnetic Waves, and Their Speed, Derived from Maxwell’s Equations In the absence of currents and charges, Maxwell’s equations become: Copyright © 2009 Pearson Education, Inc. 31-5 Electromagnetic Waves, and Their Speed, Derived from Maxwell’s Equations This figure shows an electromagnetic wave of wavelength λ and frequency f. The electric and magnetic fields are given by . where Copyright © 2009 Pearson Education, Inc. 31-5 Electromagnetic Waves, and Their Speed, Derived from Maxwell’s Equations Applying Faraday’s law to the rectangle of height Δy and width dx in the previous figure gives a relationship between E and B: . Copyright © 2009 Pearson Education, Inc. 31-5 Electromagnetic Waves, and Their Speed, Derived from Maxwell’s Equations Similarly, we apply Maxwell’s fourth equation to the rectangle of length Δz and width dx, which gives . Copyright © 2009 Pearson Education, Inc. 31-5 Electromagnetic Waves, and Their Speed, Derived from Maxwell’s Equations Using these two equations and the equations for B and E as a function of time gives . Here, v is the velocity of the wave. Substituting, Copyright © 2009 Pearson Education, Inc. 31-5 Electromagnetic Waves, and Their Speed, Derived from Maxwell’s Equations The magnitude of this speed is 3.0 x 108 m/s – precisely equal to the measured speed of light. Copyright © 2009 Pearson Education, Inc. 31-5 Electromagnetic Waves, and Their Speed, Derived from Maxwell’s Equations Example 31-2: Determining E and B in EM waves. Assume a 60-Hz EM wave is a sinusoidal wave propagating in the z direction with E pointing in the x direction, and E0 = 2.0 V/m. Write vector expressions for E and B as functions of position and time. Copyright © 2009 Pearson Education, Inc. 31-6 Light as an Electromagnetic Wave and the Electromagnetic Spectrum The frequency of an electromagnetic wave is related to its wavelength and to the speed of light: Copyright © 2009 Pearson Education, Inc. 31-6 Light as an Electromagnetic Wave and the Electromagnetic Spectrum Electromagnetic waves can have any wavelength; we have given different names to different parts of the wavelength spectrum. Copyright © 2009 Pearson Education, Inc. 31-6 Light as an Electromagnetic Wave and the Electromagnetic Spectrum Example 31-3: Wavelengths of EM waves. Calculate the wavelength (a) of a 60-Hz EM wave, (b) of a 93.3-MHz FM radio wave, and (c) of a beam of visible red light from a laser at frequency 4.74 x 1014 Hz. Copyright © 2009 Pearson Education, Inc. 31-6 Light as an Electromagnetic Wave and the Electromagnetic Spectrum Example 31-4: Cell phone antenna. The antenna of a cell phone is often ¼ wavelength long. A particular cell phone has an 8.5-cm-long straight rod for its antenna. Estimate the operating frequency of this phone. Copyright © 2009 Pearson Education, Inc. 31-6 Light as an Electromagnetic Wave and the Electromagnetic Spectrum Example 31-5: Phone call time lag. You make a telephone call from New York to a friend in London. Estimate how long it will take the electrical signal generated by your voice to reach London, assuming the signal is (a) carried on a telephone cable under the Atlantic Ocean, and (b) sent via satellite 36,000 km above the ocean. Would this cause a noticeable delay in either case? Copyright © 2009 Pearson Education, Inc. 31-7 Measuring the Speed of Light The speed of light was known to be very large, although careful studies of the orbits of Jupiter’s moons showed that it is finite. One important measurement, by Michelson, used a rotating mirror: Copyright © 2009 Pearson Education, Inc. 31-7 Measuring the Speed of Light Over the years, measurements have become more and more precise; now the speed of light is defined to be c = 2.99792458 × 108 m/s. This is then used to define the meter. Copyright © 2009 Pearson Education, Inc. 31-8 Energy in EM Waves; the Poynting Vector Energy is stored in both electric and magnetic fields, giving the total energy density of an electromagnetic wave: Each field contributes half the total energy density: Copyright © 2009 Pearson Education, Inc. 31-8 Energy in EM Waves; the Poynting Vector This energy is transported by the wave. Copyright © 2009 Pearson Education, Inc. 31-8 Energy in EM Waves; the Poynting Vector The energy transported through a unit area per unit time is called the intensity: Its vector form is the Poynting vector: Copyright © 2009 Pearson Education, Inc. 31-8 Energy in EM Waves; the Poynting Vector Typically we are interested in the average S value of S: . Copyright © 2009 Pearson Education, Inc. 31-8 Energy in EM Waves; the Poynting Vector Example 31-6: E and B from the Sun. Radiation from the Sun reaches the Earth (above the atmosphere) at a rate of about 1350 J/s·m2 (= 1350 W/m2). Assume that this is a single EM wave, and calculate the maximum values of E and B. Copyright © 2009 Pearson Education, Inc. 31-9 Radiation Pressure In addition to carrying energy, electromagnetic waves also carry momentum. This means that a force will be exerted by the wave. The radiation pressure is related to the average intensity. It is a minimum if the wave is fully absorbed: and a maximum if it is fully reflected: Copyright © 2009 Pearson Education, Inc. 31-9 Radiation Pressure Example 31-7: Solar pressure. Radiation from the Sun that reaches the Earth’s surface (after passing through the atmosphere) transports energy at a rate of about 1000 W/m2. Estimate the pressure and force exerted by the Sun on your outstretched hand. Copyright © 2009 Pearson Education, Inc. 31-9 Radiation Pressure Example 31-8: A solar sail. Proposals have been made to use the radiation pressure from the Sun to help propel spacecraft around the solar system. (a) About how much force would be applied on a 1 km x 1 km highly reflective sail, and (b) by how much would this increase the speed of a 5000-kg spacecraft in one year? (c) If the spacecraft started from rest, about how far would it travel in a year? Copyright © 2009 Pearson Education, Inc. 31-10 Radio and Television; Wireless Communication This figure illustrates the process by which a radio station transmits information. The audio signal is combined with a carrier wave. Copyright © 2009 Pearson Education, Inc. 31-10 Radio and Television; Wireless Communication The mixing of signal and carrier can be done two ways. First, by using the signal to modify the amplitude of the carrier (AM): Copyright © 2009 Pearson Education, Inc. 31-10 Radio and Television; Wireless Communication Second, by using the signal to modify the frequency of the carrier (FM): Copyright © 2009 Pearson Education, Inc. 31-10 Radio and Television; Wireless Communication At the receiving end, the wave is received, demodulated, amplified, and sent to a loudspeaker. Copyright © 2009 Pearson Education, Inc. 31-10 Radio and Television; Wireless Communication The receiving antenna is bathed in waves of many frequencies; a tuner is used to select the desired one. Copyright © 2009 Pearson Education, Inc. 31-10 Radio and Television; Wireless Communication A straight antenna will have a current induced in it by the varying electric fields of a radio wave; a circular antenna will have a current induced by the changing magnetic flux. Copyright © 2009 Pearson Education, Inc. 31-10 Radio and Television; Wireless Communication Example 31-9: Tuning a station. Calculate the transmitting wavelength of an FM radio station that transmits at 100 MHz. Copyright © 2009 Pearson Education, Inc. Summary of Chapter 31 • Maxwell’s equations are the basic equations of electromagnetism: Copyright © 2009 Pearson Education, Inc. Summary of Chapter 31 • Electromagnetic waves are produced by accelerating charges; the propagation speed is given by • The fields are perpendicular to each other and to the direction of propagation. Copyright © 2009 Pearson Education, Inc. Summary of Chapter 31 • The wavelength and frequency of EM waves are related: • The electromagnetic spectrum includes all wavelengths, from radio waves through visible light to gamma rays. • The Poynting vector describes the energy carried by EM waves: Copyright © 2009 Pearson Education, Inc.