Download Concrete Design Steel Design Masonry Design Timber/Wood

Y2 Consultants, LLC
307.733.2999  [email protected]  PO Box 2674  Jackson, WY 83001
B.S., Architectural Engineering, University of Wyoming, 2007
Wyoming PE 14641
LEED Green Associate
Y2 ConsultantsJackson, WY2011-Present
Structural Design Group, Inc.Santa Rosa, CA2007-2010
American Institute of Steel Construction (AISC ID 3002133)
American Wood Council (AWC)




TETON COUNTY SCHOOL DISTRICT #1 – CENTRAL ADMINISTRATION OFFICE. Jeff
was the structural design engineer responsible for the structural design,
permitting, and construction support in 2012. Jeff did a significant amount of
value engineering in direct communication with Ward + Blake Architects to
design an economical, functional building. The building design is an energy
efficient, light-framed-wood construction, with a structurally insulated panel
roof supported by glue lam beam supports.
Sonoma State University Dormitory Remodel. Jeff was the structural design
engineer responsible for the design and permitting of the Zinfandel Village
Residential Community Remodel in 2007 and 2008. The project included the
modernization and remodel of the multi-structure, on-campus dormitory
facility in Cotati, California.
Cardinal Newman High School Wrestling and Weight Lifting Buildings. Jeff was
a structural design engineer, construction support and inspector for the
structural steel and light gage metal framed building. The project included
large spanning exposed structural steel trusses enabling skylights to provide
plenty of natural lighting in Santa Rosa, California.
West Side Union Elementary School. Jeff was a structural engineer responsible
for design, permitting, construction support and inspector of the re-build of
the West Side Union Elementary School in Healdsburg, California. The school
was destroyed in a fire and needed to be re-built using the same floor plan but
an update to modern building code.
Concrete Design
Steel Design
Masonry Design
Timber/Wood Design
Retaining Wall Design
Pre-stress Concrete
Design

Salmon Creek Elementary School Cafeteria Building. Jeff was a structural engineer responsible for design,
permitting, construction support and inspector for the first LEED Platinum School building in California. Located in
Occidental, California, the non-orthogonal building with a wavy framed roof and large exposed steel braced frames
includes a green roof and many other green attributes. The K-8 charter school is also a community and
environmental education center focused on place-based learning.
http://inhabitat.com/californias-first-leed-platinum-school-teaches-with-the-environment/

Teton Motor’s Subaru Addition. Jeff was the structural design engineer for the new Subaru maintenance and sales
office for Teton Motors. This structure is a mixed use building; home to Subaru’s maintenance garage and
employee housing above. The building is composed of mostly structural steel and light framed wood and steel
construction. Pre-manufactured moment frames were utilized to maintain an open layout in the service garage as
well as a steel truss moment frame to clear-span the garage and support the housing and offices on the upper
floor. Hawtin Jorgensen Architects

Quality Inn’s 49er Inn Addition/Remodel. Jeff was the structural design engineer for the Inn’s remodel currently
under construction in Jackson, Wyoming. This complex structure contains a 2nd floor pool above the new
entrance/lobby. The building required a hybrid of systems, structural steel, pre-stress concrete, wood/timber, and
masonry construction. Ward + Blake Architects

Freemark Abbey. Jeff was the structural design engineer for the winery’s remodel for the historic stone building’s
tasting room, outdoor patio and courtyard. The remodel included gutting the building’s inside for update and
modernization without damaging or altering the historical 100 year-old stone façade. The winery is in St. Helena
located in California’s Napa Valley.

Hotel Yountville. Jeff was a structural design engineer for the multi-structure, multi-story resort and spa in
Yountville located in California’s Napa Valley. The building features a stone façade with elegant timber details.
http://www.hotelyountville.com/

Simi Winery. Jeff was the structural designer for many of the winery’s industrial buildings as well as the tasting
room and corporate headquarters located in Healdsburg, California.

Wente Vineyards. Jeff was the structural design engineer for many site and building renovations for winery.
Renovations included CMU site walls and retaining walls containing a cantilevered steel trellis, and renovations to
the historical adobe tasting/sales building. Wente Vineyards is located in Livermore, California.

Bella Villa Messina, Healdsburg, California Bed & Breakfast. Jeff was the structural design engineer for an old
vineyard that was turned into a bed and breakfast. The remodel included a drilled-pier foundation system due to
erosion requirements on top the hillside and contained a large old wine crushing tank that was converted to a
beautiful Spanish style swimming pool.

Pine Glades. Jeff is now the structural design engineer for the continuation of the Pine Glades development
located on Snow King in Jackson, Wyoming. The multi-family structures are on a steep hillside with a drive-out
basement and large concrete retaining walls at the back. These retaining walls were backfilled with a geo-foam to
lessen the imposed loads on the retaining wall.

Amarosa Village. Jeff was a structural design engineer for the low income, multi-family residential village in Santa
Rosa, California. The village included multiple, mid-rise residential structures, including soft stories.

Jeff has experience as a structural design engineer for numerous residences located in California’s Bay area, Lake
Tahoe region and now Jackson, WY. These residences include different foundation systems for varying soil
conditions, structural concrete, masonry and stone facades, wood and timber framing systems. Jeff’s experience
with a variety of architects, architectural styles, and project types ensures a solid finished product.