Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
TECHNICAL SPECIFICATION FOR PURCHASE OF EQUIPMENT IN AYUB TEACHING HOSPITAL.. ANESTHESIA MACHINE WITH VENTILATOR QUANTITY: 08Nos Anesthesia 3 gas unit (O2, N2O, Air) Digital Display of Pipeline & cylinder pressure on screen. Central Gas Driven Unit with Central Gas hoses Pin index cylinder yokes for Oxygen & Nitrous Oxide (One for each) Connections for large Oxygen and Nitrous Cylinders (One for each) Power outlet with socket outlet Anesthesia Ventilator (STANDARD) The ventilator shall be capable of ventilating Adult & Pediatric patient down to 2 kg body weight. Screen Size 6“Color or more. Auto-clavable breathing system. Heated and dehumidified breathing system. Modes of Ventilation Volume Preset time cycle ventilator (IPPV mode) Pressure Controlled Mode. Manual / Spontaneous. Control Ranges: Frequency: 4 to 60 bpm or better PEEP: 0 to 20 cmH2O Trigger sensitivity: 2 to 15 I/min or better Continuous monitoring of O2 concentration, Frequency, Tidal Volume, Minute Volume, Pressure Breathing mode selection (Standby / Volume / Spontaneous & pressure) Fresh Gas Decoupling System Built in oxygen monitoring Automatic Flow sensor & O2 Calibration Battery Back up More than 30 minutes. Power Supply 220VAC, 50Hz Supplied with Adult and Pediatric Anesthesia breathing circuit Optional : Isoflorane & Sevoflorane both vaporizer will be supplied with each unit. SUCTION MACHINE HEAVY DUTY Heavy duty Mobile Suction Unit with twin jars of capacity up to 4 or 5 liters each Auto-clavable. 10X bacterial filter Footswitch Complete aspiration set 220V/50Hz. I Phase Trolley with lockable wheels. Nozzles of different sizes or shapes. CAUTERY MACHINE QUANTITY: 10 Nos QUANTITY 08 Nos. Provide PURE CUT, BLEND (1), BLEND (2),BLEND(3), COAG1(spray), COAG2(contact)and AUTO BIPOLAR, FOOTSWITCH BIPOLAR, Digital 400Watt. Percentage output digital display shows on front panel. It is controlled by Microprocessor which is responsible for controlling and monitoring of all the functions and features in unit. Output values (CUT, COAG, BIPOLAR) are remained in the memory after switching off. These values will be come up to the display at turning on the power. Automatic bipolar output without using footswitch or with hand. This can be hand or foot operated. A bipolar output power profile that provides good resolution to permit small changes in power levels for delicate work yet has sufficient maximum output power capability to satisfy the requirements of the more demanding Procedures. Spray Coagulation provides the Trans Urethral Resection (T. U. R) and Endoscopic procedures in urology. ( 400D) Accessibility to parts and ease of maintenance that is unsurpassed. Versatility, Reliability. Designed for safety / Designed for Ease of use. Adaptive REM Monitoring/PCS ( Patient Control System): After the patient return electrode is applied, and the initial impedance is between 5 ohms and 135 ohms, the “adaptive” REM system measures the contact impedance and uses it as a reference value or above 135 ohms, the REM alarm sounds and the Mono-Polar output is disabled. Technical Specifications: Output Power PURE CUT 400W AT 300-500Ω BLEND 1 270W AT 300-500Ω BLEND 2 200W AT 300-500Ω BLEND 3 160W AT 300-500Ω SPRAY COAG 70W AT 300-500Ω BIPLAR COAG 70W AT 100Ω Operating Frequency: 400KHZ + 10% Input Voltage: 110/220V, 50/60 Hz Enclosure Leakage Current 0.1 µA Patient Leakage Current 7 µA Earth Leakage Current 03.358 mA RF Leakage Current 43 mA Protection Class / Type: Class I / Type CF STANDARD ACCESSORIES: No: Standard Accessories Qty 1 Footswitch 2 pedal with cable 01 2 Footswitch 1 pedal with cable 01 3 Reusable Foot switching pencil with cable 01 4 Disposable 2 push button monopolar pencil with cable and 01 electrode 5 Bipolar forceps and Cable asset 01 6 Reusable patient plate with cable for adult 01 7 Disposable patient plate for adult 01 8 Set of electrodes (6Pieces) for reusable and disposable handle 01 9 Power cable 01 OPERATION TABLE QUANTITY 08 Nos. Multi Sectional Electro-Hydraulic operated operation table Sturdy enough to hold a weight of Minimum 180kg in the normal position Minimum 3-sections or more excluding head rest The leg section will be of split led type. Fixed column with removable with removable top Table top should be of radiolucent material The mattress covers with washable, antistatic and of fire resistant material The movements shall be controlled through handset controller Side rails for accessories attachment Trendelenberg and reverse trendelenberg position and lateral left right position between Flex and reflex Raising/ lowering of the head section Raising/ lowering of the leg section. STANDARD ACCESSORIES FOR TABLE: (All Stainless steel) Shoulder Supports Set of 2 Universal Lateral Supports Lateral Supports 2 Nos. General Purpose Head Support Anesthetic Screen Frame Knee Crutches 2 Nos. Raised Arm Board 1 , Arm Board Kidney Elevator Cassette Holder Knee Rest Douche Tray Hanging Type Douche Tray Sliding Type TRACTION TABLE QUANTITY 02 Nos. Multi Sectional Electro-Hydraulic operated operation table Full length radiolucent top with integral X-ray cassette tunnel Slim line column offset relative to tabletop and base. Trendelenberg and reverse trendelenberg position and lateral left right position between Flex and reflex Raising/ lowering of the head section Raising/ lowering of the leg section. Longitunanal displacement . 600mm wide top plus optional width extenders Interchangeable general and orthopedic surgery trunk sections Auto self-locking, interchangeable head, leg and infill sections Covers are made of impact resistant acrylic capped ABS Battery status indicators for primary and back-up batteries on handset and table base Standby control panel on table column Tabletop break offset from column A choice of general and orthopedic trunks allow the table to be easily configured for general, orthopedic and specialist procedures Offset column break to improves the imaging flexibility Extended height range for optimum clinician comfort in use 200kg or more patient weight Orthopedic docking cart facilitates rapid and secure table set-up interchangeable head and leg sections offer Corded handset for simple, intuitive control prevent fluid and dirt ingress TABLE MAIN FEATURES INCLUDES THE FOLLOWINGS: Modular orthopedic Easy adjustment Easy configuration Override control range of traction and orthopedic accessories easily secure to the operating table Dynamic Hip Screw (DHS) Tibia and lateral femoral nailing orthopedic system - kits and spares To provides excellent patient support and allows positioning without the need for manual handling. Country of origin must be USA, Japan, UK & Europe.