Download Internetworking

Internetworking
Topics




Client-server programming model
Networks
Internetworks
Global IP Internet
 IP addresses
 Domain names
 Connections
A Client-Server Transaction
Most network applications are based on the client-server
model:




A server process and one or more client processes
Server manages some resource.
Server provides service by manipulating resource for clients
Server activated by request from client (vending machine
analogy)
1. Client sends request
Client
process
4. Client
handles
response
Server
process
3. Server sends response
Resource
2. Server
handles
request
Note: clients and servers are processes running on hosts
(can be the same or different hosts).
–2–
Hardware Org of a Network Host
CPU chip
register file
ALU
system bus
memory bus
main
memory
I/O
bridge
MI
Expansion slots
I/O bus
USB
controller
mouse keyboard
–3–
graphics
adapter
disk
controller
network
adapter
disk
network
monitor
Computer Networks
A network is a hierarchical system of boxes and wires
organized by geographical proximity

SAN (System Area Network) spans cluster or machine room
Switched Ethernet, Quadrics QSW, …

LAN (local area network) spans a building or campus.
Ethernet is most prominent example.

WAN (wide-area network) spans country or world.
Typically high-speed point-to-point phone lines.
An internetwork (internet) is an interconnected set of
networks.

The Gobal IP Internet (uppercase “I”) is the most famous
example of an internet (lowercase “i”)
Let’s see how we would build an internet from the
ground up.
–4–
Lowest Level: Ethernet Segment
Ethernet segment consists of a collection of hosts connected by
wires (twisted pairs) to a hub.
Spans room or floor in a building.
host
host
100 Mb/s
host
100 Mb/s
hub
ports
Operation



Each Ethernet adapter has a unique 48-bit address.
Hosts send bits to any other host in chunks called frames.
Hub slavishly copies each bit from each port to every other port.
Every host sees every bit.
Note: Hubs are on their way out. Bridges (switches, routers) became
cheap enough to replace them (means no more broadcasting)
–5–
Next Level: Bridged Ethernet Segment
Spans building or campus.
Bridges cleverly learn which hosts are reachable from which ports
and then selectively copy frames from port to port.
A
host
B
host
host
host
X
bridge
hub
100 Mb/s
hub
100 Mb/s
1 Gb/s
hub
host
host
100 Mb/s
host
bridge
Y
100 Mb/s
host
host
host
hub
host
host
C
–6–
Conceptual View of LANs
For simplicity, hubs, bridges, and wires are often shown as a
collection of hosts attached to a single wire:
host
–7–
host ...
host
Next Level: internets
Multiple incompatible LANs can be physically connected by
specialized computers called routers.
The connected networks are called an internet.
host
host ...
host
host
host ...
LAN 1
LAN 2
router
WAN
router
WAN
router
LAN 1 and LAN 2 might be completely different,
totally incompatible LANs (e.g., Ethernet and Wifi,
802.11*, T1-links, DSL, …)
–8–
host
Logical Structure of Internet
host
router
router
host
router
router
router

router
Ad hoc interconnection of networks
 No particular topology
 Vastly different router & link capacities

Send packets from source to destination by hopping through
networks
 Router forms bridge from one network to another
 Different packets may take different routes
–9–
The Notion of an internet Protocol
How is it possible to send bits across incompatible
LANs and WANs?
Solution: protocol software running on each host and
router smooths out the differences between the
different networks.
Implements an internet protocol (i.e., set of rules) that
governs how hosts and routers should cooperate
when they transfer data from network to network.

– 10 –
TCP/IP is the protocol for the global IP Internet.
What Does an internet Protocol Do?
1. Provides a naming scheme


An internet protocol defines a uniform format for host
addresses.
Each host (and router) is assigned at least one of these
internet addresses that uniquely identifies it.
2. Provides a delivery mechanism


An internet protocol defines a standard transfer unit (packet)
Packet consists of header and payload
 Header: contains info such as packet size, source and
destination addresses.
 Payload: contains data bits sent from source host.
– 11 –
Transferring Data Over an internet
(1)
Host A
Host B
client
server
data
protocol
software
internet packet
(2)
data
(3)
data
LAN1
adapter
PH FH1
(7)
data
PH FH2
(6)
data
PH FH2
LAN2
adapter
LAN2
adapter
LAN2 frame
(4)
– 12 –
Router
LAN1
adapter
LAN1
data
protocol
software
PH FH1
LAN1 frame
(8)
data
PH FH1
data
protocol
software
PH FH2 (5)
LAN2
Other Issues
We are glossing over a number of important questions:




What if different networks have different maximum frame
sizes? (segmentation)
How do routers know where to forward frames?
How are routers informed when the network topology
changes?
What if packets get lost?
These (and other) questions are addressed by the area
of systems known as computer networking.
– 13 –
Global IP Internet
Most famous example of an internet.
Based on the TCP/IP protocol family

IP (Internet protocol) :
 Provides basic naming scheme and unreliable delivery
capability of packets (datagrams) from host-to-host.

UDP (Unreliable Datagram Protocol)
 Uses IP to provide unreliable datagram delivery from process-
to-process.

TCP (Transmission Control Protocol)
 Uses IP to provide reliable byte streams from process-to-
process over connections.
Accessed via a mix of Unix file I/O and functions from
the sockets interface.
– 14 –
Hardware and Software Org of an
Internet Application
Internet client host
Internet server host
Client
User code
Server
TCP/IP
Kernel code
TCP/IP
Sockets interface
(system calls)
Hardware interface
(interrupts)
Network
adapter
Hardware
and firmware
Global IP Internet
– 15 –
Network
adapter
Basic Internet Components
An Internet backbone is a collection of routers
(nationwide or worldwide) connected by highspeed point-to-point networks.
A Network Access Point (NAP) is a router that
connects multiple backbones (sometimes
referred to as peers).
Regional networks are smaller backbones that
cover smaller geographical areas (e.g., cities
or states)
A point of presence (POP) is a machine that is
connected to the Internet.
Internet Service Providers (ISPs) provide dial-up
or direct access to POPs.
– 16 –
NAP-Based Internet Architecture
NAPs link together commercial backbones provided by
companies such as AT&T and Worldcom
Currently in the US there are about 50 commercial
backbones connected by ~12 NAPs (peering points).
Similar architecture worldwide connects national
networks to the Internet.
– 17 –
Internet Connection Hierarchy
Private
“peering”
agreements
between
two backbone
companies
often bypass
NAP
NAP
Backbone
POP
NAP
Backbone
POP
POP
NAP
Backbone
POP
Backbone
POP
POP
Colocation
sites
POP
T3
Regional net
POP
T1
POP
ISP
POP
POP
T1
ISP (for individuals) Small Business
– 18 –
Big Business
POP
POP
Cable
modem
Pgh employee
POP
DSL
DC employee
Network Access Points (NAPs)
Note: Peers in this context are
commercial backbones..droh
Source: Boardwatch.com
– 19 –
MCI/WorldCom/UUNET Global
Backbone
Source: Boardwatch.com
– 20 –
Naming and Communicating on the
Internet
Original Idea

Every node on Internet would have unique IP address
 Everyone would be able to talk directly to everyone

No secrecy or authentication
 Messages visible to routers and hosts on same LAN
 Possible to forge source field in packet header
Shortcomings



– 21 –
There aren't enough IP addresses available
Don't want everyone to have access or knowledge of all
other hosts
Security issues mandate secrecy & authentication
Evolution of Internet: Naming
Dynamic Address Assignment

Most hosts don't need to have known address
 Only those functioning as servers

DHCP protocol
 Local ISP assigns address for temporary use
Example:

My laptop at CMU
 IP address 128.2.220.249 (bryant-tp3.cs.cmu.edu)
 Assigned statically

My laptop at home
 IP address 205.201.7.7 (dhcp-7-7.dsl.telerama.com)
 Assigned dynamically by my ISP for my DSL service
– 22 –
Evolution of Internet: Firewalls
S
W
W
Corporation X
1
W
10.2.2.2
Firewall
2
Internet
4
176.3.3.3
3
S
216.99.99.99
Firewalls



Hides organizations nodes from rest of Internet
Use local IP addresses within organization
For external service, provides proxy service
1. Client request: src=10.2.2.2, dest=216.99.99.99
2. Firewall forwards: src=176.3.3.3, dest=216.99.99.99
3. Server responds: src=216.99.99.99, dest=176.3.3.3
– 23 –
4. Firewall forwards response: src=216.99.99.99, dest=10.2.2.2
Virtual Private Networks
S
W
Corporation X
W
Firewall
10.6.6.6
W
198.3.3.3
10.X.X.X
W
Internet
Supporting Road Warrior


Employee working remotely with assigned IP address 198.3.3.3
Wants to appear to rest of corporation as if working internally
 From address 10.6.6.6
 Gives access to internal services (e.g., ability to send mail)
Virtual Private Network (VPN)

– 24 –
Overlays private network on top of regular Internet
A Programmer’s View of the Internet
1. Hosts are mapped to a set of 32-bit IP addresses.

128.2.203.179
2. The set of IP addresses is mapped to a set of
identifiers called Internet domain names.

128.2.203.179 is mapped to www.cs.cmu.edu
3. A process on one Internet host can communicate
with a process on another Internet host over a
connection.
– 25 –
1. IP Addresses
32-bit IP addresses are stored in an IP address struct


IP addresses are always stored in memory in network byte
order (big-endian byte order)
True in general for any integer transferred in a packet header
from one machine to another.
 E.g., the port number used to identify an Internet connection.
/* Internet address structure */
struct in_addr {
unsigned int s_addr; /* network byte order (big-endian) */
};
Handy network byte-order conversion functions:
htonl: convert long int from host to network byte order.
htons: convert short int from host to network byte order.
ntohl: convert long int from network to host byte order.
ntohs: convert short int from network to host byte order.
– 26 –
Dotted Decimal Notation
By convention, each byte in a 32-bit IP address is
represented by its decimal value and separated by a
period
 IP address 0x8002C2F2 = 128.2.194.242
Functions for converting between binary IP addresses
and dotted decimal strings:



– 27 –
inet_aton: converts a dotted decimal string to an IP
address in network byte order.
inet_ntoa: converts an IP address in network by order to
its corresponding dotted decimal string.
“n” denotes network representation. “a” denotes application
representation.
IP Address Structure
IP (V4) Address space divided into classes:
0123
Class A 0 Net ID
Class B 1 0
8
16
24
Host ID
Net ID
Class C 1 1 0
Class D 1 1 1 0
Class E 1 1 1 1
Host ID
Net ID
Multicast address
Reserved for experiments
Network ID Written in form w.x.y.z/n


n = number of bits in host address
E.g., CMU written as 128.2.0.0/16
 Class B address
Unrouted (private) IP addresses:
10.0.0.0/8 172.16.0.0/12 192.168.0.0/16
– 28 –
31
Host ID
2. Internet Domain Names
unnamed root
.net
mit
.edu
cmu
cs
.gov
berkeley
ece
.com
First-level domain names
amazon
www
208.216.181.15
cmcl
pdl
kittyhawk
imperial
128.2.194.242
128.2.189.40
– 29 –
Second-level domain names
Third-level domain names
Domain Naming System (DNS)
The Internet maintains a mapping between IP addresses
and domain names in a huge worldwide distributed
database called DNS.

Conceptually, programmers can view the DNS database as a
collection of millions of host entry structures:
/* DNS host entry structure
struct hostent {
char
*h_name;
/*
char
**h_aliases;
/*
int
h_addrtype;
/*
int
h_length;
/*
char
**h_addr_list; /*
};
*/
official domain name of host */
null-terminated array of domain names */
host address type (AF_INET) */
length of an address, in bytes */
null-terminated array of in_addr structs */
Functions for retrieving host entries from DNS:

– 30 
–
gethostbyname: query key is a DNS domain name.
gethostbyaddr: query key is an IP address.
Properties of DNS Host Entries
Each host entry is an equivalence class of domain names
and IP addresses.
Each host has a locally defined domain name localhost
which always maps to the loopback address
127.0.0.1
Different kinds of mappings are possible:

Simple case: 1-1 mapping between domain name and IP addr:
 kittyhawk.cmcl.cs.cmu.edu maps to 128.2.194.242

Multiple domain names mapped to the same IP address:
 eecs.mit.edu and cs.mit.edu both map to 18.62.1.6

Multiple domain names mapped to multiple IP addresses:
 aol.com and www.aol.com map to multiple IP addrs.

– 31 –
Some valid domain names don’t map to any IP address:
 for example: cmcl.cs.cmu.edu
A Program That Queries DNS
int main(int argc, char **argv) { /* argv[1] is a domain name */
char **pp;
/* or dotted decimal IP addr */
struct in_addr addr;
struct hostent *hostp;
if (inet_aton(argv[1], &addr) != 0)
hostp = Gethostbyaddr((const char *)&addr, sizeof(addr),
AF_INET);
else
hostp = Gethostbyname(argv[1]);
printf("official hostname: %s\n", hostp->h_name);
for (pp = hostp->h_aliases; *pp != NULL; pp++)
printf("alias: %s\n", *pp);
for (pp = hostp->h_addr_list; *pp != NULL; pp++) {
addr.s_addr = ((struct in_addr *)*pp)->s_addr;
printf("address: %s\n", inet_ntoa(addr));
}
}
– 32 –
Querying DNS from the Command
Line
Domain Information Groper (dig) provides a scriptable
command line interface to DNS.
linux> dig +short kittyhawk.cmcl.cs.cmu.edu
128.2.194.242
linux> dig +short -x 128.2.194.242
KITTYHAWK.CMCL.CS.CMU.EDU.
linux> dig +short aol.com
205.188.145.215
205.188.160.121
64.12.149.24
64.12.187.25
linux> dig +short -x 64.12.187.25
aol-v5.websys.aol.com.
– 33 –
3. Internet Connections
Clients and servers communicate by sending streams
of bytes over connections:

Point-to-point, full-duplex (2-way communication), and
reliable.
A socket is an endpoint of a connection

Socket address is an IPaddress:port pair
A port is a 16-bit integer that identifies a process:


Ephemeral port: Assigned automatically on client when
client makes a connection request
Well-known port: Associated with some service provided by
a server (e.g., port 80 is associated with Web servers)
A connection is uniquely identified by the socket
addresses of its endpoints (socket pair)

– 34 –
(cliaddr:cliport, servaddr:servport)
Putting it all Together:
Anatomy of an Internet Connection
Client socket address
128.2.194.242:51213
Client
Client host address
128.2.194.242
– 35 –
Server socket address
208.216.181.15:80
Connection socket pair
(128.2.194.242:51213, 208.216.181.15:80)
Server
(port 80)
Server host address
208.216.181.15
Next Time
How to use the sockets interface to establish Internet
connections between clients and servers
How to use Unix I/O to copy data from one host to
another over an Internet connection.
– 36 –