Download Stax/Stax SRM-353X Info

January 2016 | News Release
Stax SRM-353X
new
ENERGISER - HANDMADE IN JAPAN
The SRM-353X energiser (amplifier) was created to ensure the very best performance when
partnered with a STAX electrostatic Earspeaker. For the SRM-353X, only the highest-quality
audio grade parts were chosen to optimise the amplifiers circuit and deliver the widest
frequency response possible.
SRM-353X features include:
l Original low-noise dual FET at first stage, all-stage
direct coupling class-A DC amplifier configuration and no
coupling capacitors. This allows for the smallest nuances in
the music to be reproduced beautifully.
l Improvement to the emitter follower at the output stage
results in an extended dynamic range, natural tonality and
finer detail.
l Energiser incorporates a custom-made, 2-axis 4-gang
volume controller.
l Traditional STAX non-magnetic aluminum chassis as
standard.
l Carefully selected components chosen not just for their
long life and reliability but equally for their tonal quality
and unmatched performance.
l In addition to an RCA input terminal, an XLR balanced
input terminal is also provided to accommodate a wide
range of audio equipment.
t: 01727 865488
e: [email protected]
w: www.symmetry-systems.co.uk
January 2016 | News Release
SRM-353X specifications:
Frequency response:
DC - 90kHz (when used with one of the
SR-L series Earspeaker)
Rated input level:
100mV (at 100V output)
Mains voltage:
Different depending on the area
Power consumption:
30W
Gain:
60dB
Operating temperature / humidity:
0 to 35 degrees C / less than 90%
(non condensing)
Harmonic distortion:
0.01% or less (with one SR-L500 at
100Vr.m.s. / 1kHz output)
Dimension:
150 (W) x100 (H) x360 (D) mm
(protruding portion included)
Input impedance:
50kΩ(RCA) / 50kΩx 2 (XLR)
Weight:
3.0kg
Input terminal:
RCA x 1 or XLR x 1 (alternative)
Others:
Input-bypassing parallel output (RCA)
Maximum output voltage:
400Vr.m.s. / 1kHz
Specifications and appearance are subject to
change without notice for improvement.
Standard bias voltage:
DC580V
t: 01727 865488
e: [email protected]
w: www.symmetry-systems.co.uk