Download (PROsine) Pure Sine Wave Inverters

DA TA S HE ET
PROsine 1000i inverter
Provides 1000 watts of true sine wave AC power from a DC source
Designed for both recreational and industrial
applications, PROsine™ 1000i converts 12- or
24-volt DC battery power to 230-volts,
50-hertz, true sine wave AC power. The
1000-watt output is capable of handling heavy
duty AC loads or smaller, multiple AC loads.
The PROsine 1000i 230VAC power inverter has
CE approval, meeting EN50091-1 UPS General
and Safety requirements; and EN50091-2: UPS
EMC requirements.
With 30 to 45% less distortion than modified
sine wave inverters, PROsine’s output is
precise, well-regulated and identical to utilitysupplied power. The clean output makes
PROsine ideal for handling sensitive loads. It’s
low electromagnetic interference (EMI) level
has minimal effect on other onboard
equipment like televisions and sensitive
navigational instruments.
• true sine wave output with less than
PROsine is lighter and more compact than
other inverters with similar power ratings
because it uses high-frequency switching
technology in the power conversion process.
The PROsine 1000i is available in both 12- and
24-volt models with several AC configurations:
Features
3% total harmonic distortion
• 1000-watt, 230 volt AC, 50-hertz output
• CE marked
• detachable LCD panel for monitoring and
functional control. It attaches in four
different positions or remotely with the
addition of the optional remote interface
panel
• DC connection terminals designed to accept
battery cables in 180 degrees of rotation
• rugged, durable chassis
• compact and light weight
• easy to install
• Standard UK, European (Schuko) or
Australian AC receptacles
• AC hardwire terminal strip for permanent
installation into an electrical system
• terminal strip plus built-in transfer relay for
permanent installation and backup power
applications
Powerful, true sine
AC power from a DC
source
Protection features
• over temperature shutdown
• automatic overload protection
• reverse polarity protection
• short circuit protection
• AC backfeed protection
• over voltage protection
• under voltage protection
PROsine 1000i specifications
Electrical performance
Maximum continuous power
1000W
Surge capability (5 seconds)
1500W
Peak output current
11A
No load current draw (12V/24V)
<1.8A / <0.9A (search mode)
<0.13A / < 0.63A (power save mode)
Efficiency
90%
Output waveform
true sine wave <3% THD
Output frequency
50Hz ±0.05% (crystal controlled)
Output voltage (at no load)
230VAC RMS ±3%
Output voltage (over full load AND battery voltage
range)
230 AC RMS -10%/+4%
Input voltage range 12V / 24V
10 – 16 VDC / 20 – 32VDC
Transfer relay rating (hardwire/transfer relay models)
10A
Transfer time AC to Inverter and Inverter to AC
Max 2 cycles (typically 1 cycle)
<2.5 seconds with POWERSAVE “ON”
Mechanical performance
Operating temperature
0ºC to 60ºC
Weight
7.0kg
Dimensions
390mm x 280mm x 115mm
Storage temperature
-30 to +70ºC
Protection features
Over temperature
yes, shutdown
Input protection
•
Battery reverse polarity
fuse protected (non-user serviceable)
•
Over voltage (12V / 24V)
battery cut-out 16VDC / 32VDC
•
Under voltage (12V / 24V)
battery cut-out 10VDC / 20VDC
Output protection
•
Overload
Backfeed protection
yes
yes
Regulatory approvals
General and safety requirements
CE: EN50091 - 1: UPS
EMC
CE: EN50091 - 2: UPS
Options
• Built-in Transfer Relay Choose a model
with a built-in transfer relay and enjoy the
benefits of a backup power system. With a
built-in transfer, the PROsine 1000i
immediately begins inverting DC battery
power to deliver AC power to the loads if
utility AC power fails or is disconnected
from the unit. When utility AC is available
again, it automatically switches back.
• PROsine Interface Panel replaces the
LCD display on the unit so that the LCD can
be mounted remotely
• DC Hardwire Kit contains equipment and
connectors required to hardwire the unit to
an electrical system and take advantage of
the built-in transfer switch
Merlin Equipment Ltd, Unit 4 Cabot Business Village, Cabot Lane, Poole,
Dorset, BH17 7BA, UK
T: 01202 697979 F: 01202 691919 E: [email protected]
DA TA S HE ET
PROsine 1800i inverter
Provides 1800 watts of true sine wave AC power from a DC source
Designed for both recreational and industrial
applications, PROsine™ 1800i converts 12- or
24-volt DC battery power to 230-volts,
50-hertz, true sine wave AC power. The
1800-watt output is capable of handling heavy
duty AC loads or smaller, multiple AC loads.
The PROsine 1800i 230VAC power inverter has
CE approval, meeting EN50091-1 UPS General
and Safety requirements; and EN50091-2: UPS
EMC requirements.
With 30 to 45% less distortion than most
modified sine wave inverters, PROsine’s output
is precise, well-regulated and identical to
utility-supplied power. The clean output makes
PROsine ideal for handling sensitive loads like
digital clocks and variable speed tools. It’s low
electromagnetic interference (EMI) level have
minimal affect on other onboard equipment
like televisions and sensitive navigational
instruments.
• true sine wave output with less than
PROsine is lighter and more compact than
other inverters with similar power ratings
because it uses high-frequency switching
technology in the power conversion process.
• DC connection terminals designed to accept
The PROsine 1800i is available in both 12- and
24-volt models with several AC configurations:
• Standard UK, European (Schuko) or
Australian AC receptacles
• AC hardwire terminal strip for permanent
installation into an electrical system
• terminal strip plus built-in transfer relay for
permanent installation and backup power
applications
Clean true sine wave
power AC power from
a DC source
Features
3% total harmonic distortion
• 1800-watt, 230-volts AC, 50-hertz output
• CE approval
• detachable LCD panel for monitoring and
functional control. It attaches in four
different positions or remotely with the
addition of the optional remote interface
panel
battery cables in 180 degrees of rotation
• rugged, durable chassis
• compact and light weight
• easy to install
Protection features
• over temperature shutdown
• automatic overload protection
• reverse polarity protection
• short circuit protection
• AC backfeed protection
• over voltage protection
• under voltage protection
PROsine 1800i specifications
Electrical performance
Maximum continuous power
1800W
Surge capability (5 seconds)
2900W
Peak output current
20A
No load current draw (12V/24V)
<1.8A / <0.9A (search mode)
<0.13A / < 0.63A (power save mode)
Efficiency
90%
Output waveform
true sine wave <3% THD
Output frequency
50Hz ±0.05% (crystal controlled)
Output voltage (at no load)
230 VAC RMS ±3%
Output voltage (over full load and battery voltage range)
230 VAC RMS -10%/+4%
Input voltage range 12V / 24V
10 – 16VDC / 20 – 32VDC
Transfer relay rating (on hardwire/transfer relay models)
10A
Transfer time AC to Inverter and Inverter to AC
Max 2 cycles (typically 1 cycle)
<2.5 seconds with POWERSAVE “ON”
Mechanical performance
Operating temperature
0ºC to 60ºC
Weight
7.5kg
Dimensions
390mm x 280mm x 115mm
Storage temperature
-30 to +70ºC
Protection features
Over temperature
yes, shutdown
Input protection
•
Battery reverse polarity
fuse protected (non-user serviceable)
•
Over voltage (12V / 24V)
battery cut-out 16VDC / 32VDC
•
Under voltage (12V / 24V)
battery cut-out 10 VDC / 20 VDC (
5 second time delay, 10.5 VDC warning)
Output protection
•
Overload
AC backfeed
yes
yes
Regulatory approvals and other designations
General and safety requirements
CE:EN50091 - 1: UPS
EMC
CE: EN50091 - 2: 1996 UPS
Options
• Built-in Tansfer Relay Choose a model
with a built-in transfer relay and enjoy the
benefits of a backup power system. With a
built-in transfer, the PROsine 1800i
immediately begins inverting DC battery
power to deliver AC power to the loads if
utility AC power fails or is disconnected
from the unit. When utility AC is available
again, it automatically switches back.
• PROsine Interface Panel replaces the
LCD display on the unit so that the LCD can
be mounted remotely
• DC Hardwire Kit contains equipment and
connectors required to hardwire the unit to
an electrical system and take advantage of
the built-in transfer switch
Merlin Equipment Ltd, Unit 4, Cabot Business Village, Cabot Lane, Poole, Dorset,
BH17 7BA, UK
T: 01202 697979 F: 01202 691919 E: [email protected]