Download Schaffner NSG2025 Fast Transient / Burst Generator NSG 2025

Schaffner NSG2025 Fast Transient / Burst Generator
Fast Transient Burst Generator Series
Type
Max. Burst
Amplitude
Max. Burst
Frequency
Coupling
Phase
Network
Current
NSG 2025-1
4.4 kV
1 MHz
1
16 A
NSG 2025-2
4.4 kV
1 MHz
1
16 A
NSG 2025-3
4.4 kV
1 MHz
1
30 A
NSG 2025-4
4.4 kV
1 MHz
3
30 A
NSG 2025-5
8 kV
500 kHz
1
16 A
NSG 2025-6
8 kV
500 kHz
1
16 A
NSG 2025-7
8 kV
500 kHz
1
30 A
NSG 2025-8
8 kV
500 kHz
3
30 A
The Schaffner NSG 2025 EFT Burst Simulator is a high end burst generator and the
choice for users who need the maximum in pulse amplitude/frequency capabilities,
flexibility, coupling network features and EUT connectivity. Based on a "building
block" concept, the Schaffner NSG 2025 lets you select and combine pulse
generator, coupling and EUT adapters to create a flexible, upgradeable EMC test
work station to match your needs today and into the future. It covers all the widely
used burst test specifications of IEC, EN, ANSI-IEEE as well as the known extended
manufacturer's requirements.
The Teseq / Schaffner NSG 2025 Fast Transient / Burst Generator offers the most
extensive range of pulse voltages and burst frequencies available in a single
instrument. Pulses can be coupled into the mains supply voltage or applied as a pure
high voltage for data and signal line testing.
Pre-programmed IEC standard tests are available at the touch of a button and pulse
parameters are user configurable - manually via front panel control or via
PCWindows software control. Not only does the Teseq / Schaffner NSG 2025 meet
all the requirements of current world test standards with comfortable margins, it also
anticipates likely future modifications with functions including a user-configurable
burst frequency to 1MHz and extended selectable coupling modes.
Teseq / Schaffner NSG 2025 Specifications:
Unit Power
100 - 115 V and 220 - 240 V, 50 - 60 Hz
Pulse Amplitude
200 V to 4.5 or 8 kV (open circuit) adjustable in steps of 20 V
Polarity
positive or negative, selectable
Rise Time
5ns ±20% (50 W, 10 - 90%)
Pulse Width
50ns ±30% (50 W and 1 W), 100ns ±50% open circuit
Pulses Per
Packet
1 to 150 pulses
Burst Duration
Pulses per packet / burst frequency, (15ms burst duration as
per IEC 1000-4-4 up to 10 kHz)
Burst Repetition
100ms to 10s ±2ms or 2%
Impedance
50 W ±20%
Coupling Network
1-phase or 3-phase
EUT Supply
Switched by remote control, 24 to 500 Vac, 50 - 60 Hz
Coupling Modes
Line to reference ground (IEC 1000-4-4), selected lines
together to reference ground, all lines to reference ground
(common mode)
Phase Angle
Asynchronous/synchronous 0 - 360° ±2°
Coupling
Capacitance
33 nF
Decouple
Attenuation
>20 dB
Cross Talk
Attenuation
>30 dB
With compliments
Helmut Singer Elektronik
www.helmut-singer.de [email protected]
fon +49 241 155 315
fax +49 241 152 066
Feldchen 16-24 D-52070 Aachen Germany
With compliments
Helmut Singer Elektronik
www.helmut-singer.de [email protected]
fon +49 241 155 315
fax +49 241 152 066
Feldchen 16-24 D-52070 Aachen Germany
With compliments
Helmut Singer Elektronik
www.helmut-singer.de [email protected]
fon +49 241 155 315
fax +49 241 152 066
Feldchen 16-24 D-52070 Aachen Germany
NSG 2025
FAST TRANSIENT/BURST GENERATOR
The NSG 2025 is a high end burst generator and the choice for users who need the maximum in pulse
amplitude/frequency capabilities, flexibility, coupling network features and EUT connectivity. Based on
a ‘building block’ concept, NSG 2025 lets you select and combine pulse generator, coupling and EUT
adapters to create a flexible, upgradeable EMC test work station to match your needs today and into the
future. It covers all the widely used burst test specifications of IEC, EN, ANSI-IEEE as well as the known
extended manufacturer’s requirements.
High end burst generator
Pulse amplitudes up to 8 kV
Burst frequencies up to 500 kHz
Integrated single or 3-phase
Powerful pulse generation
The NSG 2025 offers the most extensive range of pulse voltages and burst frequencies available in a single
instrument. Pulses can be coupled into the mains supply voltage or applied as a pure high voltage for data
and signal line testing. Preprogrammed IEC standard tests are available at the touch of a button and pulse
parameters are user configurable manually via front panel control or via PC-Windows software control.
Not only does the NSG 2025 meet all the requirements of current world test standards with comfortable
margins, it also anticipates likely future modifications with functions including a user-configurable burst
frequency to 1 MHz and extended selectable coupling modes.
coupling network
One system for all needs
A wide range of test accessories is available for the NSG 2025. The supply voltage is switchable between
110/115 V and 220/240 V, and country-specific power-line sockets for the EUT are interchangeable so
full compliance and volume production tests can be run on finished products and systems destined for
different markets.
Built-in safety
Every component in the NSG 2025 that carries a high voltage is designed to be inherently safe, with
interlock features built into the hardware, ensuring automatic power-down in case of violation of any
safety condition.
Manual control
The standard, preprogrammed IEC tests can be called up, and used straight away or be modified and
saved. All test parameters including pulse amplitude, duration, rise time and polarity as well as burst
frequency, duration and phase angle can be set manually, for custom testing. Up to eight different custom
tests can be saved and used again or modified at any time.
Software control
The WIN 2025 Windows-based software module allows remote, real-time access to all the instrument
functions and provides a whole range of additional test sequencing, programming and reporting capabilities. Any of the saved, pre-programmed or custom tests can easily be combined into a sequence for
automatic execution.
Professional reporting
A sophisticated report generator provides automatic reporting of results in a professional format - with
a facility for on-line addition of engineers’ comments. These records provide an invaluable reference for
design engineers throughout the verification process and meet legal requirements for proof of compliance testing.
A d v a n c e d Te s t S o l u t i o n s f o r E M C
With compliments
Helmut Singer Elektronik
www.helmut-singer.de [email protected]
fon +49 241 155 315
fax +49 241 152 066
Feldchen 16-24 D-52070 Aachen Germany
NSG 2025
FAST TRANSIENT/BURST GENERATOR
Technical specifications
Pulse amplitude:
Polarity:
Rise time:
Pulse width:
Burst frequency:
Pulses per packet:
Burst repetition:
Impedance:
Phase angle:
200 V to 8 kV (open circuit) in steps of 10 V
+ or - selectable
5 ns ±30% (10-90%)
50 ns ±30% (50 Ω/<2 Ω), 100 ns ±50% (>1 kΩ)
0.1 to 500 kHz ±2%
1 to 150 pulses
100 ms to 10 s ±2 ms or 2%
50 Ω ±20%
asynchronous/synchronous 0 to 360° ±2°
Ordering information
NSG 2025-7
NSG 2025-8
Options:
WIN 2025
CDN 8014
INA 161
Software control package
Capacitive coupling clamp acc. to IEC/EN 61000-4-4 with SHV
connector without interlock, including interconnection cables
Capacitive coupling clamp acc. to IEC/EN 61000-4-4 with SHV
connector and interlock, including interconnection cables
Rack mounting brackets
INA 250
INA 251
INA 252
INA 253
INA 254
INA 255
INA 256
INA 260
INA 261
INA 262
INA 303B
Adapters for EUT connection with national plugs
IEC 309 32A 3-phase (red) for max burst voltage 8 kV
IEC 309 16A 1-phase (blue) for max burst voltage 8 kV
Germany, Schuko 1-phase 16 A
Switzerland, 1-phase 10 A
France, 1-phase 16 A
GB, 1-phase 13 A
US, 1-phase 15 A
Warning lamp assembly
Separate SHV plug for 5 mm cables
Universal safety plug set
Optical link set, 10 m opto-cable, 100 to 240 VAC
CDN 8015
Teseq AG
Nordstrasse 11F 4542 Luterbach Switzerland
T + 41 32 681 40 40 F + 41 32 681 40 48
[email protected] www.teseq.com
691-030A Jul 2007
8 kV, 500 kHz, 1-phase, 30 A
8 kV, 500 kHz, 3-phase, 30 A per phase
A d v a n c e d Te s t S o l u t i o n s f o r E M C