Download Test equipment : Clamp-on

Test equipment : Clamp-on-meters SC77
?
Clamp-on-meters SC77
Part number: 13278
Rating: Not Rated Yet
Price
Ask a question about this product
Description
All-in-one meter for the HVAC/R technician.
SC66 and SC67 are manual ranging. SC76 and SC77 are autoranging and work with Fieldpiece accessory heads. SC77 has true RMS and
blacklight.
The SC76 and SC77 have removable probe tips and mVDC ranges which allow the meters to connect to any of our accessory heads. The
meters expand to keep up with your measurement needs.
TECHNICAL SPECIFICATIONS:
- Non-contact Voltage (NCV); the presence of 24VAC triggers a loud beeper and bright LED.
- Temperature; Thermocouples allow for real-time accurate temperature measurement.
- Microamps; For flame rectifier diode tests.
- Capacitance; For motor-run and motor-start capacitors.
- And more;
blackligth for viewing display in the dark true RMS for true power calculations.
LED and beeper turn on to indicate you’ve touched potentially dangerous voltage. Continuity indicated by LED and beeper
Hold saves readings so you can look at them even after the meter has been disconnected. Ohm ranges for motor windings and other HVAC/R
applications.
Amps AC resolution to 0.01A for heat anticipator circuit (20A range).
Auto-power off to extend battery life.
1 / 2
Test equipment : Clamp-on-meters SC77
The padded ANC7 case is included with every SC60 and 70 series meter. It has a zippered pocket and a belt loop on the back.
Also included are silicone test leads, alligator clips (SC76 and SC77), ATB1 K-Type thermocouple, 9V battery (installed), and operator’s
manual.
2 / 2
Powered by TCPDF (www.tcpdf.org)