Download Product Overview - Bright

Product Overview
Hazardous & Industrial
Enclosures
ATEX & IECEx Compliant
1
BPG Enclosures
• GRP enclosure in standard
(Grey) or Carbon loaded
(black anti-static)
• IP66/67 to IEC/EN 60529
• DTS01 (Shell/ERA deluge test)
• Ambient temp range:
– -65 to +130°C (Hazardous)
– -70 to +130°C (NonHazardous)
• Holes can be fitted to any side
including rear face
• High impact strength: IK09 (10
Joules)
• Fire rated
• Various accessories available:
– Mounting feet
– Security screws
• Pre-assembled GRP range (BPG6 & BPG8 sizes)
• Complete with terminals and entries (2 x Side A & C)
• Dual labelled ATEX & IECEx
2
Accessories and options for BPG
1. Carbon loading gives a surface tracking value of between 10MΩ and 10GΩ. Surface colour is black.
2. EEx'e' certification may be component or apparatus certified - please specify your requirements.
3. Silicone gasket increases temperature rating (-70º to +130º C) (-94°F to +266°F).
4. Radio Frequency Interference (RF) gasket may reduce IP rating. Enclosure may also be internally
coated with RFI material.
3
4
SX Enclosures
•
•
•
•
•
•
•
•
•
•
316L Stainless Steel
IP66/67 to IEC/EN 60529
DTS01 (Shell/ERA deluge test)
Ambient temp range:
– -50 to +175°C (Hazardous)
– -60 to +200°C (NonHazardous)
High impact strength: IK10 (20
Joules)
Holes can be fitted to any side
including rear face
Custom sizes available
– Ex certified up to 2m x 2m
x 2m
Windows can be added to
enclosure door
ATEX certified Ex de sockets
can be fitted to enclosure
Fire rated
5
Accessories and options for SX
1. The range is available either in stainless steel 316 (SX variants) or mild steel (MSX variants).
2. Manufacturing tolerances are +/- 3mm on overall dimensions and +/-0.5mm on fixing hole centres.
3. Silicone gasket increases temperature rating (-70º to +175º C) (-94°F to +347°F) and may increase working life in
some applications.
4. Breather drain available in IP66 stainless steel or plastic.
6
7
Fire Rated Enclosures – SX & BPG
IEC331 Fire Test
• 750°C for 3 hours followed by visual inspection
• Then 5kV insulation resistance test
BS6387 Fire Test - 3 separate tests
1. Fire alone: Category C
• Flame at 950°C for 3 hours, cables powered
2. Fire with Water: Category W
• Flame at 650°C for 15 minutes then flam and water
spray for 15 minutes
3. Fire with Mechanical shock: Category Z
• Flame at 950°C with mechanical shock applied at
15s intervals for 15minutes
• Note: All fire rated enclosures must be fitted with
ceramic terminals
8
ZAG Enclosures
• Marine grade Aluminium
• Can be painted to customer
specification
• IP66/67 to IEC/EN 60529
• Holes can be fitted to any side
including rear face
• Available as Apparatus and
Component certified
enclosures
• Large number of terminal
types to choose from
• Use Power dissipation method
for calculating terminal
population
9
SSD Enclosure
• Stainless Steel Ex d Enclosure
• ATEX & IECEx IIB or IIB+H2
certified
• Ambient range -20°C to +55°C
• Can be fitted with
pushbuttons, selector
switches, windows.
• Used for containing
transformers, circuit breakers,
motor controls, PLC’s, etc.
• Custom sizes available:
– Almost any size dictated
by surface area: from
560cm² to 18000cm²
• Maximum voltage 660V ac
120V dc
10
Nautilus IP68
• Stainless Steel 316 Ex e
Enclosures
• ATEX & IECEx Ex e, Ex ia or Ex ib
certified
• Certified IP68 to EN60529
• 100m for 5 days
• 50m for 14 days
• T5 rated with an ambient
temperature range of -50ºC to
+55ºC
• Hinged cover with handle and
lifting eye straps fitted as
standard
• Optional mild steel or stainless
steel mounting plates available
• Terminal boxes only - based on
the same permitted terminal
lists as the SX, BPG and ZAG
range
11
High Voltage Enclosures
• Ex certified HV range based on
SX enclosure
• From 3.3kV up to 45kV and
3.2kA
• Suitable for -50°C
• Typical applications:
– Umbilical connection
– Down hole pumps
– Water injection pumps
– Fire suppression systems
– Temporary power supply
connections
• A unique solution for the
termination of offshore
umbilical cables or onshore
distribution systems.
• The power conductor
compartment houses the HV
cables. A separate control
compartment is used for
terminating fibre optic or
control cables.
• Ex e or Ex e op is
• Other ratings same as HVJB8
series.
HVJB 125
12
Hazardous and Marine Lighting
13
Hazardous & Marine Lighting
• Zone 1, Zone 2 and Safe Area luminaires for
arduous environments
• LED, Fluorescent and HID lamp options
• Designed for simple installation and low
maintenance
• Low Glare (patent pending) LED technology
• Dark sky asymmetric floodlight design
reduces light pollution and glare
14
Nimbus
• Panel luminaire supplied
with satellite power supply
• Zone 1, Zone 2 & Safe Area
• ATEX & IECEx compliant
• Extremely thin profile
>12mm
• Significant weight and
energy saving over
traditional recessed
fluorescent
• Excellent uniformity and
colour rendering
• Dimmable option
15
Gamma LG
• Zone 2, 21 & 22
• ATEX & IECEx compliant
• Utilises patent pending
light guide technology for
low glare solution
• Designed for lower
mounting heights where
visual discomfort glare is an
issue
• Marine grade stainless
steel construction
• Built in junction box for
simple installation
16
APC Photocell
• A zone 1 & 2 photocell for the
control of luminaires
• Manufactured in glass reinforced
polyester with polycarbonate
window
• On-load switching up to 10 &
16Amps.
• Can be used as combined
photocell/junction box
• Suitable for use in Zone1, 2 and
22 areas, ATEX and IEC Ex
certified.
• Ambient temperature range: 40°C to +55°C
• Ingress protection to IP66/67
according to IEC 529
17
Hazardous Area Controls
Control Station Range
PCS Range
ABCS
Range
SXCS Range
18
Control Station Range
• PCS (Polycarbonate) – ATEX Compliant
• ABCS (GRP) & SXCS (Stainless Steel) – ATEX &
IECEx Compliant
• IP66 to IEC/EN 60529
• Range of sizes and operator options available:
– Pushbuttons, e-stops, indicator lamps,
illuminated pushbuttons, selector switches &
ammeters
19