Download Chapter 8: Vectors and Parametric Equations

Chapter
8
Unit 2 Trigonometry (Chapters 5–8)
VECTORS AND
PARAMETRIC EQUATIONS
CHAPTER OBJECTIVES
•
•
•
•
•
484
Add, subtract, and multiply vectors.
(Lessons 8-1, 8-2, 8-3, 8-4)
Represent vectors as ordered pairs or ordered triples
and determine their magnitudes. (Lessons 8-2, 8-3)
Write and graph vector and parametric equations.
(Lesson 8-6)
Solve problems using vectors and parametric
equations. (Lessons 8-5, 8-6, 8-7)
Use matrices to model transformations in
three-dimensional space. (Lesson 8-8)
Chapter 8
Vectors and Parametric Equations
An advanced glider known as a sailplane, has high
maneuverability and glide capabilities. The Ventus 2B sailplane placed
p li c a ti
first at the World Soaring Contest in New Zealand. At one competition,
a sailplane traveled forward at a rate of 8 m/s, and it descended at a rate of 4 m/s.
A problem involving this situation will be solved in Example 3.
AERONAUTICS
on
Ap
• Find equal,
opposite, and
parallel vectors.
• Add and
subtract vectors
geometrically.
l Wor
ea
ld
OBJECTIVES
Geometric Vectors
R
8-1
The velocity of a sailplane can be represented mathematically by a vector.
A vector is a quantity that has both magnitude and direction. A vector is
represented geometrically by a directed line segment.
A directed line segment with an initial
point at P and a terminal point at Q is shown
at the right. The length of the line segment
represents the magnitude of the vector.
The direction of the arrowhead indicates the
direction of the vector. The vectors can be
PQ . The magnitude of a is
denoted by a or denoted by a
.
If a vector has its initial point at the origin, it
is in standard position. The direction of the
vector is the directed angle between the positive
x-axis and the vector. The direction
of b is 45°.
a
Q
P
y
b
45˚
x
O
If both the initial point and the terminal point are at the origin, the vector is
the zero vector and is denoted by 0 . The magnitude of the zero vector is 0, and it
can be in any direction.
Example
1 Use a ruler and protractor to determine the magnitude (in centimeters) and
the direction of n.
Sketch the vector in
standard position and
measure the magnitude
n
cm
3.6
and direction. The
n
magnitude is 3.6
centimeters, and the
30˚
direction is 30°.
x
O
Two vectors are equal if and only if they have the same direction and the
same magnitude.
Lesson 8-1
Geometric Vectors
485
x
Six vectors are shown at the right.
• z and y are equal since they have the
same direction and z
y
.
y
u
z
• v and u are equal.
• x and w have the same direction
but x
 w
, so x w.
• v
y
, but they have different
directions, so they are not equal.
v
w
The sum of two or more vectors is called the resultant of the vectors. The
resultant can be found using either the parallelogram method or the triangle
method.
Parallelogram Method
Draw the vectors so that their initial points
coincide. Then draw lines to form a
complete parallelogram. The diagonal from
the initial point to the opposite vertex of the
parallelogram is the resultant.
Triangle Method
Draw the vectors one after another, placing
the initial point of each successive vector at
the terminal point of the previous vector.
Then draw the resultant from the initial
point of the first vector to the terminal point
of the last vector.
p
q
q
p
The parallelogram method cannot be
used to find the sum of a vector and
itself.
Example
q
p q
p
This method is also called the
tip-to-tail method.
v and w using:
2 Find the sum of a. the parallelogram method.
b. the triangle method.
v
w
c. Compare the resultants found in both
methods.
a. Copy v then copy w placing the initial
points together.
Form a parallelogram that has v and w as
two of its sides. Draw dashed lines to
represent the other two sides.
The resultant is the vector from the vertex
of v and w to the opposite vertex of the
parallelogram.
486
Chapter 8
Vectors and Parametric Equations
v
w
v w
b. Copy v , then copy w so that the initial point of w
is on the terminal point of v . (The tail of v
connects to the tip of w .)
w
v
v w
The resultant is the vector from the initial point
of v to the terminal point of w.
c. Use a ruler and protractor to measure the magnitude and direction of
each resultant. The resultants of both methods have magnitudes of
3.5 centimeters and directions of 20°. So, the resultants found in both
methods are equal.
Vectors can be used to solve real-world applications.
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
3 AERONAUTICS Refer to the application at the beginning of the lesson. At
the European Championships, a sailplane traveled forward at 8 m/s and
descended at 4 m/s. Determine the magnitude of the resultant velocity of
the sailplane.
Let 1 centimeter represent 2 m/s. Draw
two vectors, f and d , to represent the
forward velocity and the descending
velocity of the sailplane, respectively.
Use the parallelogram method. Copy f . Then
copy d , placing the initial point at the initial
point of f . Draw dashed lines to represent the
other two sides of the parallelogram.
f
d
f
d
The resultant velocity of the sailplane is the
vector p from the vertex of f and d to the
opposite vertex of the parallelogram.
Measure the resultant, 4.5 centimeters.
Multiply the resultant’s magnitude by 2 to
determine the magnitude of the resultant
velocity of the sailplane. Why?
f
p
d
4.5 cm 2 m/s 9 m/s
The sailplane is moving at 9 m/s.
Two vectors are opposites if they have the
same magnitude and opposite directions. In the
diagram, g and h are opposites, as are i and j .
The opposite of g is denoted by g
. You can
use opposite vectors to subtract vectors. To
).
find g h , find g (h
g
h
i
Lesson 8-1
j
Geometric Vectors
487
A quantity with only magnitude is called a scalar quantity. Examples of
scalars include mass, length, time, and temperature. The numbers used to
measure scalar quantities are called scalars.
a
The product of a scalar k and a vector a is a
vector with the same direction as a and a magnitude
of ka
, if k 0. If k 0, the vector has the opposite
direction of a and a magnitude of ka
. In the figure
at the right, b 3
a and c 2 a.
a
a
a
b
c
Example
1
v w.
4 Use the triangle method to find 2 2
v
Rewrite the expression as a sum.
1
2
w
1
2
2v
w 2v
w
Draw a vector twice the magnitude of v to
represent 2v
. Draw a vector with the opposite
direction to w and half its magnitude to
1
represent w.
1
2w
2
1
2
Place the initial point of w on the terminal
point of 2 v . (Tip-to-tail method)
1
2
2 v
1
2 v 2 w
Then 2v
w has the initial point of 2 v and
1
2
the terminal point of w.
Two or more vectors are parallel if and
only if they have the same or opposite
directions. Vectors i and j have opposite
directions and they are parallel. Vectors and
k are parallel and have the same direction.
Two or more vectors whose sum is a given
vector are called components of the given
vector. Components can have any direction.
Often it is useful to express a vector as the sum
of two perpendicular components. In the figure
x,
at the right, p is the vertical component of and q is the horizontal component of x.
488
Chapter 8
Vectors and Parametric Equations
i
j
ᐍ
k
x
p
q
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
5 NAVIGATION A ship leaving
port sails for 75 miles in a
direction 35° north of due
east. Find the magnitude of
the vertical and horizontal
components.
Draw s . Then draw a
horizontal vector through the
initial point of s . Label the
resulting angle 35°. Draw a
vertical vector through the
terminal point of s . The
vectors will form a right triangle, so you can use the sine and cosine ratios to
find the magnitude of the components.
y
75
sin 35° 75 miles
s
y
x
75
cos 35° y 75 sin 35°
y 43
x 75 cos 35°
x 61
35˚
x
The magnitude of the vertical component is approximately 43 miles, and the
magnitude of the horizontal component is approximately 61 miles.
Vectors are used in physics to represent velocity, acceleration, and forces
acting upon objects.
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
6 CONSTRUCTION A piling for a high-rise building is pushed by two
bulldozers at exactly the same time. One bulldozer exerts a force of 1550
pounds in a westerly direction. The other bulldozer pushes the piling with a
force of 3050 pounds in a northerly direction.
a. What is the magnitude of the resultant force upon the piling, to the
nearest ten pounds?
b. What is the direction of the resulting force upon the piling, to the nearest
ten pounds?
a. Let x represent the force for bulldozer 1.
Let y represent the force for bulldozer 2.
N
Draw the resultant r . This represents the total force
acting upon the piling. Use the Pythagorean
Theorem to find the magnitude of the resultant.
y
3050
r
c2 a2 b2
r 2 15502 30502
2 (3
r
 (1550)
050)2
r
 3421
W
S
x
E
1550
The magnitude of the resultant force upon the piling is about 3420 pounds.
(continued on the next page)
Lesson 8-1
Geometric Vectors
489
b. Let a be the measure of the angle r makes with x.
The direction of the resultant can be found
by using the tangent ratio.
N

y
x

tan a y
3050
3050
tan a 1550
a 63°
Take tan1 of each side.
r
a˚
x
W
S
The resultant makes an angle of 63° with x . The
1550
direction of the resultant force upon the piling is
90 63 or 27° west of north. Direction of vectors
is often expressed in terms of position relative to due north, due south,
due east, or due west, or as a navigational angle measures clockwise
from due north.
C HECK
Communicating
Mathematics
FOR
E
U N D E R S TA N D I N G
Read and study the lesson to answer each question.
1. Draw a diagram showing the resultant of two vectors, and describe how you
obtained it.
2. Compare a line segment and a vector.
a
3. Describe a real-world situation involving vectors
that could be represented by the diagram at the
right.
4. Tell whether RS is the same as SR . Explain.
Guided Practice
w
.
Use a ruler and a protractor to determine the magnitude (in centimeters) and
direction of each vector.
5.
6.
x
7.
z
y
Use x, y , and z above to find the magnitude and direction of each resultant.
8. x y
9. x y
10. 4y
z
11. the difference of a vector twice as long as z and a vector one third the
magnitude of x
12. Find the magnitude of the horizontal and vertical components of y.
13. Aviation
An airplane is flying due west at a velocity of 100 m/s. The wind is
blowing out of the south at 5 m/s.
a. Draw a labeled diagram of the situation.
b. What is the magnitude of airplane’s resultant velocity?
490
Chapter 8 Vectors and Parametric Equations
www.amc.glencoe.com/self_check_quiz
E XERCISES
A
Practice
Use a ruler and a protractor to determine the magnitude (in centimeters) and
direction of each vector.
14.
15.
s
16.
17.
t
u
r
Use r, s, t , and u above to find the magnitude and direction of each resultant.
B
18. r s
19. s t
20. s u
21. u r
22. r t
23. 2r
24. 3s
25. 3u
2s
26. r t u
27. r s u
1
28. 2s
u r
2
29. r 2t s 3
u
30. three times t and twice u
Find the magnitude of the horizontal and vertical components of each vector
shown for Exercises 14–17.
C
31. r
32. s
33. t
34. u
35. The magnitude of m is 29.2 meters, and the magnitude of n is 35.2 meters. If m
and n are perpendicular, what is the magnitude of their sum?
36. In the parallelogram drawn for the parallelogram method, what does the
diagonal between the two terminal points of the vectors represent? Explain
your answer.
37. Is addition of vectors commutative? Justify your answer. (Hint: Find the sum of
two vectors, r s and s r , using the triangle method.)
38. Physics
l Wor
ea
Ap
on
ld
R
Applications
and Problem
Solving
p li c a ti
Three workers are pulling on ropes
attached to a tree stump as shown in the diagram.
Find the magnitude and direction of the resultant
force on the tree. A newton (N) is a unit of force used
in physics. A force of one newton will accelerate a
one-kilogram mass at a rate of one meter per second
squared.
Does a
b  always,
?
sometimes, or never equal a
 b
Draw a diagram to justify your answer.
39. Critical Thinking
60 newtons
35 newtons
60˚
40 newtons
40. Toys
Belkis is pulling a toy by exerting a force of
1.5 newtons on a string attached to the toy.
a. The string makes an angle of 52° with the floor. Find the vertical and
horizontal components of the force.
b. If Belkis raises the string so that it makes a 78° angle with the floor, what are
the magnitudes of the horizontal and vertical components of the force?
Lesson 8-1 Geometric Vectors
491
41. Police Investigation
Police officer
Patricia Malloy is investigating an
automobile accident. A car slid off an
icy road at a 40° angle with the center
line of the road with an initial velocity
of 47 miles per hour. Use the drawing
to determine the initial horizontal and
vertical components of the car’s
velocity.
40˚
If a is a vector and k is a scalar, is it possible that a ka
?
Under what conditions is this true?
42. Critical Thinking
43. Ranching
Matsuko has attached two wires to a corner fence post to complete
a horse paddock. The wires make an angle of 90° with each other. If each wire
pulls on the post with a force of 50 pounds, what is the resultant force acting on
the pole?
44. Physics
Mrs. Keaton is the director of a local
art gallery. She needs to hang a painting
weighing 24 pounds with a wire whose parts
form a 120° angle with each other. Find the pull
on each part of the wire.
Mixed
Review
120˚
45. Find the equation of the line that bisects the acute angle formed by the lines
x y 2 0 and y 5 0. (Lesson 7-7)
46. Verify that csc cos tan 1 is an identity. (Lesson 7-2)
47. Find the values of for which tan 1 is true. (Lesson 6-7)
48. Use the graphs of the sine and cosine functions to find the values of x for
which sin x cos x 1. (Lesson 6-5)
49. Geometry
The base angles of an isosceles triangle measure 18°29, and the
altitude to the base is 5 centimeters long. Find the length of the base and the
lengths of the congruent sides. (Lesson 5-2)
50. Manufacturing
A manufacturer produces packaging boxes for other
companies. The largest box they currently produce has a height two times its
width and a length one more that its width. They wish to produce a larger
packaging box where the height will be increased by 2 feet and the width and
length will be increased by 1 foot. The volume of the new box is 160 cubic feet.
Find the dimensions of the original box. (Lesson 4-4)
51. Determine the equations of the vertical and horizontal asymptotes, if any, of
x2
g(x) . (Lesson 3-7)
(x 1)(x 3)
52. SAT/ACT Practice
Grid-In Three times the least of three consecutive odd
integers is three greater than two times the greatest. Find the greatest of the
three integers.
492
Chapter 8 Vectors and Parametric Equations
Extra Practice See p. A40.
EMERGENCY MEDICINE
on
Paramedics Paquita
Gonzalez and Trevor
Howard are moving a person on a
stretcher. Ms. Gonzalez is pushing the
stretcher with a force of 135 newtons
at 58° with the horizontal, while
Mr. Howard is pulling the stretcher
with a force of 214 newtons at 43°
with the horizontal. What is the
magnitude of the force exerted on the
stretcher? This problem will be solved
in Example 3.
Ap
• Find ordered
pairs that
represent
vectors.
• Add, subtract,
multiply, and
find the
magnitude of
vectors
algebraically.
l Wor
ea
ld
OBJECTIVES
Algebraic Vectors
R
8-2
p li c a ti
We can find the magnitude and direction of the resultant by drawing vectors
to represent the forces on the stretcher. However, drawings can be inaccurate
and quite confusing for more complex systems of vectors. In cases where more
accuracy is necessary or where the system is more complicated, we can perform
operations on vectors algebraically.
Vectors can be represented algebraically using ordered pairs of real numbers.
For example, the ordered pair 3, 5 can represent a vector in standard position.
That is, its initial point is at the origin and its terminal point is at (3, 5). You can
think of this vector as the resultant of a horizontal vector with a magnitude of 3
units and a vertical vector with magnitude of 5 units.
Since vectors with the same magnitude and
direction are equal, many vectors can be
represented by the same ordered pair. Each vector
on the graph can be represented by the ordered pair
3, 5. The initial point of a vector can be any point in
the plane. In other words, a vector does not have to
be in standard position to be expressed
algebraically.
y
(3, 5)
x
O
Assume that P1 and P2 are any two distinct
points in the coordinate plane. Drawing the
horizontal and vertical components of P
1P2
yields a right triangle. So, the magnitude of
P
1P2 can be found by using the Pythagorean
Theorem.
P2(x2, y2)
y2y1
P1(x1, y1)
Lesson 8-2
x2x1
Algebraic Vectors
493
Representation
of a Vector as
an Ordered Pair
Example
Let P1(x1, y1) be the initial point of a vector and P2(x2, y2) be the terminal
point. The ordered pair that represents P
P is x x , y y . Its
1 2
magnitude is given by P
1P2 
2
1
2
1
(x2 (y2 x1)2
y1)2.
1 Write the ordered pair that represents the vector from X(3, 5) to Y(4, 2).
Then find the magnitude of XY .
y
First, represent XY as an ordered pair.
X (3, 5)
XY 4 (3), 2 5 or 7, 7
Then, determine the magnitude of XY .
 XY
[4 (
3)]2
(
2 5)2
72 72
O
x
Y (4, 2)
98
or 72
XY is represented by the ordered pair 7, 7 and has a magnitude
of 72
units.
When vectors are represented by ordered pairs, they can be easily added,
subtracted, or multiplied by a scalar. The rules for these operations on vectors
are similar to those for matrices. In fact, vectors in a plane can be represented as
row matrices of dimension 1 2.
Vector
Operations
Example
The following operations are defined for a a1, a2, b b1, b2, and any real
number k.
b a1, a2 b1, b2 a1 b1, a2 b2
Addition: a Subtraction: a b a1, a2 b1, b2 a1 b1, a2 b2
Scalar multiplication: k a k a1, a2 ka1, ka2
2 Let m 5, 7, n 0, 4, and p 1, 3. Find each of the following.
p
b. m n
a. m m p 5, 7 1, 3
m n 5, 7 0, 4
5 (1), 7 3
5 0, 7 4
4, 4
5, 11
c. 7 p
7
p 71, 3
7 (1), 7 3
7, 21
d. 2m
3
n p
2
m 3
n p 25, 7 30, 4 1, 3
10, 14 0, 12 1, 3
11, 5
If we write the vectors described in the application at the beginning of the
lesson as ordered pairs, we can find the resultant vector easily using vector
addition. Using ordered pairs to represent vectors allows for a more accurate
solution than using geometric representations.
494
Chapter 8
Vectors and Parametric Equations
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
3 EMERGENCY MEDICINE Refer to the application at the beginning of the
lesson. What is the magnitude of the force exerted on the stretcher?
2
G
Draw a diagram of the situation. Let
G 1 represent the force Ms. Gonzalez
exerts, and let G 2 represent the force
Mr. Howard exerts.
1
G
58˚
Write each vector as an ordered pair
43˚
by finding its horizontal and vertical
components. Let G 1x and G 1y represent the x- and y-components of G 1.
Let G 2x and G 2y represent the x- and y-components of G 2.
1y
G
2y
G
214N
135N
58˚
1x
G
43˚
2x
G

G
1x
cos 58° 135

G
214
2x
cos 43°  135 cos 58°
G
1x
 214 cos 43°
G
2x
 71.5
G
1x
 156.5
G
2x

G
135
1y
sin 58°  135 sin 58°
G
1y

G
2y
sin 43° 214
 214 sin 43°
G
2y
 114.5
G
1y
 145.9
G
2y
G 1 71.5, 114.5
G 2 156.5, 145.9
Find the sum of the vectors.
G1 G 2 71.5, 114.5 156.5, 145.9
228.0, 260.4
The net force on the stretcher is the magnitude of the sum.
G 2 (228.0
)2 (260.4)
G
2 or about 346
1
The net force on the stretcher is about 346 newtons.
To convert newtons to pounds, divide the number of newtons by 4.45. So, the net
force on the stretcher can also be expressed as 346 4.45 or 77.8 pounds.
y
A vector that has a magnitude of one unit is called a
unit vector. A unit vector in the direction of the
positive x-axis is represented by i , and a unit vector in
the direction of the positive y-axis is represented by j .
So, i 1, 0 and j 0, 1.
Lesson 8-2
j
O
i
Algebraic Vectors
x
495
Any vector a a1, a2 can be expressed
as a1i a2 j .
a1i a2 j a11, 0 a20, 1 i 1, 0 and j 0, 1
a1, 0 0, a2
Scalar product
a1 0, 0 a2
Addition of vectors
a1, a2
y
(a1, a2)
a2j
a
j
O
a1i
i
x
Since a1, a2 a , a1i a2 j a . Therefore, any vector that is represented
by an ordered pair can also be written as the sum of unit vectors. The zero
vector can be represented as 0 0, 0 0 i 0 j .
Example
AB as the sum of unit vectors for A(4, 1) and B(6, 2).
4 Write First, write AB as an ordered pair.
y
AB 6 4, 2 (1)
2, 3
Then, write AB as the sum of unit vectors.
3j
AB 2 i 3 j
C HECK
Communicating
Mathematics
FOR
AB
O 2i
x
U N D E R S TA N D I N G
Read and study the lesson to answer each question.
 10, then 1. Find a counterexample If a
 10 and b
a and b are equal
vectors.
 using the graph
2. Describe how to find XY
y
O
at the right.
3. You Decide
Lina showed Jacqui the representation
of 2, 5 as a unit vector as follows.
2, 5 2, 0 0, 5
Y
X
(5)1, 0 (2) 0, 1
5i (2)j
5 i 2 j
Jacqui said that her work was incorrect. Who is right? Explain.
Guided
Practice
. Then find the magnitude of MP
.
Write the ordered pair that represents MP
4. M(2, 1), P(3, 4)
5. M(5, 6), P(0, 5)
6. M(19, 4), P(4, 0)
Find an ordered pair to represent t in each equation if u 1, 4 and
v 3, 2.
7. t u v
9. t 4u
6v
496
Chapter 8 Vectors and Parametric Equations
1
8. t u v
2
10. t 8u
x
Find the magnitude of each vector. Then write each vector as the sum of
unit vectors.
11. 8, 6
12. 7, 5
13. Construction
The Walker family is building
a cabin for vacationing. Mr. Walker and his
son Terrell have erected a scaffold to stand
on while they build the walls of the cabin.
As they stand on the scaffold Terrell pulls
on a rope attached to a support beam with
a force of 400 newtons (N) at an angle of 65°
with the horizontal. Mr. Walker pulls with a
force of 600 newtons at an angle of 110°
with the horizontal. What is the magnitude
of the combined force they exert on the log?
600 N
400 N
110˚
65˚
E XERCISES
Practice
Write the ordered pair that represents YZ . Then find the magnitude of YZ .
A
14. Y(4, 2), Z(2, 8)
15. Y(5, 7), Z(1, 2)
16. Y(2, 5), Z(1, 3)
17. Y(5, 4), Z(0, 3)
18. Y(3, 1), Z(0, 4)
19. Y(4, 12), Z(1, 19)
20. Y(5, 0), Z(7, 6)
21. Y(14, 23), Z(23, 14)
22. Find an ordered pair that represents the vector from A(31, 33) to
B(36, 45). Then find the magnitude of AB .
Find an ordered pair to represent a in each equation if b 6, 3 and
c 4, 8.
B
23. a b c
24. a 2b
c
25. a b 2c
3
26. a 2b
c
4c
27. a b
28. a b 2c
29. a 3b
1
30. a c
2
1 33. a 2b
5
c
3
4c
31. a 6b
1.2 32. a 0.4b
c
34. a 3b
c 5b
35. For m 5, 6 and n 6, 9 find the sum of the vector three times the
magnitude of m and the vector two and one half times the magnitude of the
opposite of n.
Find the magnitude of each vector. Then write each vector as the sum of unit
vectors.
C
36. 3, 4
37. 2, 3
38. 6, 11
39. 3.5, 12
40. 4, 1
41. 16, 34
www.amc.glencoe.com/self_check_quiz
Lesson 8-2 Algebraic Vectors
497
42. Write ST as the sum of unit vectors for points S(9, 2) and T(4, 3).
43. Prove that addition of vectors is associative.
l Wor
ea
Ap
on
ld
R
Applications
and Problem
Solving
p li c a ti
44. Recreation
In the 12th Bristol International Kite Festival in September 1997 in
England, Peter Lynn set a record for flying the world’s biggest kite, which had a
lifting surface area of 630 square meters. Suppose the wind is blowing against
the kite with a force of 100 newtons at an angle 20° above the horizontal.
a. Draw a diagram representing the situation.
b. How much force is lifting the kite?
45. Surfing
During a weekend surfboard competition, Kiyoshi moves at
a 30° angle toward the shore. The velocity component toward the shore
is 15 mph.
a. Make a labeled diagram to show Kiyoshi’s velocity and the velocity
components.
b. What is Kiyoshi’s velocity?
46. Critical Thinking
Suppose the points Q, R, S, and T are noncollinear,
and QR ST 0 .
a. What is the relationship between QR and ST ?
b. What is true of the quadrilateral with vertices Q, R, S, and T ?
47. River Rafting
The Soto
family is rafting on the
1.0 m /s
Colorado River. Suppose
5.0 m /s
150 m
that they are on a
stretch of the river that
is 150 meters wide,
flowing south at a rate of 1.0 m/s. In still water their raft travels 5.0 m/s.
a. How long does it take them to travel from one bank to the other if
they head for a point directly across the river?
b. How far downriver will the raft land?
c. What is the velocity of the raft relative to the shore?
Show that any vector v can be written as
v
cos ,v
 sin .
48. Critical Thinking
Mixed
Review
49. State whether PQ and RS are equal, opposite, parallel, or none of these for points
P(8, 7), Q(2, 5), R(8, 7), and S(7, 0). (Lesson 8-1)
50. Find the distance from the graph of 3x 7y 1 0 to the point at (1, 4).
(Lesson 7-7)
51. Use the sum or difference identities to find the exact value of sin 255°. (Lesson 7-3)
52. Write an equation of the sine function that has an amplitude of 17, a period of
45°, and a phase shift of 60°. (Lesson 6-5)
53. Geometry
Two sides of a triangle are 400 feet and 600 feet long, and the
included angle measures 46°20. Find the perimeter and area of the triangle.
(Lesson 5-8)
54. Use the Upper Bound Theorem to find an integral upper bound and the
Lower Bound Theorem to find the lower bound of the zeros of the function
f(x) 3x2 2x 1. (Lesson 4-5)
498
Chapter 8 Vectors and Parametric Equations
Extra Practice See p. A40.
55. Using a graphing calculator to graph y x 3 x2 3. Determine and classify
its extrema. (Lesson 3-6)
56. Describe the end behavior of f(x) x2 3x 1. (Lesson 3-5)
57. SAT Practice
A
B
C
D
E
For which values of x is 7x 1 greater than 7x 1?
all real numbers
only positive real numbers
only x 0
only negative real numbers
no real numbers
CAREER CHOICES
Aerospace Engineering
Would you like to design
aircraft or even
spacecraft? An
aerospace engineer
works with other
specialists to design,
build, and test any
vehicles that fly. As an
aerospace engineer,
you might concentrate
on one type of air or
spacecraft, or you might work on
specific components of these crafts.
There are also a number of specialties
within the field of aerospace engineering
including analytical engineering, stress
engineering, materials aerospace
engineering, and marketing and sales
aerospace engineering. One of the aspects of
aerospace engineering is the analysis of
airline accidents to determine if structural
defects in design were the cause of the
accident.
CAREER OVERVIEW
Degree Preferred:
bachelor’s degree in aeronautical or
aerospace engineering
Related Courses:
mathematics, science, computer science,
mechanical drawing
Outlook:
slower than average through the year 2006
Departures (millions)
Fatal Accidents
9
8
7
6
5
4
3
2
1
0
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97
Year
For more information on careers in aerospace engineering, visit: www.amc.glencoe.com
Extra Practice See p. Axxx.
Lesson Lesson
8-2 Algebraic
8-2 Algebraic
VectorsVectors
499 499
8-3
Vectors in Three-Dimensional
Space
ENTOMOLOGY
on
R
Entomology (en tuh MAHL uh jee) is the study of
insects. Entomologists often use time-lapse photography to study the
p li c a ti
flying behavior of bees. They have discovered that worker honeybees
let other workers know about new sources of food by rapidly vibrating their wings
and performing a dance. Researchers have been able to create three-dimensional
models using vectors to represent the flying behavior of bees. You will use vectors in
Example 3 to model a bee’s path.
Ap
• Add and
subtract vectors
in threedimensional
space.
• Find the
magnitude of
vectors in threedimensional
space.
l Wor
ea
ld
OBJECTIVES
Vectors in three-dimensional space can be
described by coordinates in a way similar to
the way we describe vectors in a plane.
Imagine three real number lines intersecting at
the zero point of each, so that each line is
perpendicular to the plane determined by the
other two. To show this arrangement on paper,
a figure with the x-axis appearing to come out
of the page is used to convey the feeling of
depth. The axes are named the x-axis,
y-axis, and z-axis.
Each point in space corresponds to an
ordered triple of real numbers. To locate a point P
with coordinates (x1, y1, z1), first find x1 on the
x-axis, y1 on the y-axis, and z1 on the z-axis. Then
imagine a plane perpendicular to the x-axis at x1
and planes perpendicular to the y- and z-axes at
y1 and z1, respectively. The three planes will
intersect at point P.
Example
z Positive
Negative
Positive y
Negative
x
Positive
Negative
z
P (x1, y1, z1)
z1
O
y
x1
x
1 Locate the point at (4, 3, 2).
z
(4, 3, 2)
Locate 4 on the x-axis, 3 on the y-axis, and 2
on the z-axis.
Now draw broken lines for parallelograms to
represent the three planes.
The planes intersect at (4, 3, 2).
500
Chapter 8
Vectors and Parametric Equations
y1
O
x
y
Ordered triples, like ordered pairs, can be used to represent vectors. The
geometric interpretation is the same for a vector in space as it is for a vector in a
plane. A directed line segment from the origin O to P(x, y, z) is called vector OP ,
corresponding to vector x, y, z.
An extension of the formula for the distance between two points in a plane
allows us to find the distance between two points in space. The distance from the
origin to a point (x, y, z) is x2 y2
z2. So the magnitude of vector x, y, z is
2 z2. This can be adapted to represent any vector in space.
x2 y
Representation
of a Vector as
an Ordered
Triple
Suppose P1(x1, y1, z1) is the initial point of a vector in space and
P2(x2, y2, z2) is the terminal point. The ordered triple that represents
P
1P2 is x2 x1, y2 y1, z2 z1. Its magnitude is given by
P
P 
(x x )2 (y y )2 (z z )2.
1 2
Examples
2
1
2
1
2
1
2 Write the ordered triple that represents the vector from X(5, 3, 2)
to Y(4, 5, 6).
XY (4, 5, 6) (5, 3, 2)
4 5, 5 (3), 6 2
1, 2, 4
Ap
on
R
ld
l Wor
Example
ea
p li c a ti
3 ENTOMOLOGY Refer to the application at the beginning of the lesson.
Suppose the flight of a honeybee passed through points at (0, 3, 3) and
(5, 0, 4), in which each unit represents a meter. What is the magnitude of the
displacement the bee experienced in traveling between these two points?
magnitude (x2 x1)2 (y2 y1)2 (z2 z1)2
(5 0
)2 (
0 3)2
(4
3)2
25 9
1
5.9
x1, y1, z1 0, 3, 3,
x2, y2, z2 5, 0, 4
The magnitude of the displacement is about 5.9 meters.
Operations on vectors represented by ordered triples are
similar to those on vectors represented by ordered pairs.
Example
2
q if p 3, 0, 4 and
4 Find an ordered triple that represents 3p
q 2, 1, 1.
3p
2q
33, 0, 4 22, 1, 1
p 3, 0, 4, q 2, 1, 1
9, 0, 12 4, 2, 2
5, 2, 14
Lesson 8-3
Vectors in Three-Dimensional Space 501
Three unit vectors are used as components of
vectors in space. The unit vectors on the x-, y-,
and z-axes are i , j , and k respectively, where
i 1, 0, 0, j 0, 1, 0, and k 0, 0, 1. The
vector a a1, a2, a3 is shown on the graph at
the right. The component vectors of a along the
three axes are a1i , a2j , and a3
k . Vector a can be
written as the sum of unit vectors; that is,
a a1i a2j a3
k.
Example
z
(a1, a 2, a 3)
a3k
O
a2j
a1i
y
x
AB as the sum of unit vectors for A(5, 10, 3) and B(1, 4, 2).
5 Write First, express AB as an ordered triple. Then, write the sum of the unit vectors
i , j , and k.
AB (1, 4, 2) (5, 10, 3)
1 5, 4 10, 2 (3)
6, 6, 1
6 i 6 j k
C HECK
Communicating
Mathematics
FOR
U N D E R S TA N D I N G
Read and study the lesson to answer each question.
1. Explain the process you would use to locate AB 2 i 3 j 4 k in space. Then
sketch the vector on a coordinate system.
2. Describe the information you need to find the components of a three-
dimensional vector from its given magnitude.
Marshall wrote the vector v 1, 4, 0 as the sum of unit vectors
i 4 j k . Denise said that v should be written as i 4 j k . Who is correct?
Explain.
3. You Decide
Guided
Practice
4. Locate point G(4, 1, 7) in space. Then find the magnitude of a vector from the
origin to G.
Write the ordered triple that represents RS . Then find the magnitude of RS .
5. R(2, 5, 8), S(3, 9, 3)
6. R(3, 7, 1), S(10, 4, 0)
Find an ordered triple to represent a in each equation if f 1, 3, 8
and g 3, 9, 1.
7. a 3 f g
8. a 2
g 5 f
Write EF as the sum of unit vectors.
9. E(5, 2, 4), F(6, 6, 6)
502 Chapter 8 Vectors and Parametric Equations
10. E(12, 15, 9), F(12, 17, 22)
11. Physics
Suppose that during a storm the force of the wind blowing against a
skyscraper can be expressed by the vector 132, 3454, 0, where each measure in
the ordered triple represents the force in newtons. What is the magnitude of
this force?
E XERCISES
Practice
Locate point B in space. Then find the magnitude of a vector from the origin to B.
A
12. B(4, 1, 3)
14. B(10, 3, 15)
13. B(7, 2, 4)
. Then find the magnitude of TM
.
Write the ordered triple that represents TM
15. T(2, 5, 4), M(3, 1, 4)
16. T(2, 4, 7), M(3, 5, 2)
17. T(2, 5, 4), M(3, 1, 0)
18. T(3, 5, 6), M(1, 1, 2)
19. T(5, 8, 3), M(2, 1, 6)
20. T(0, 6, 3), M(1, 4, 3)
21. Write the ordered triple to represent
C (1, 3, 10)
z
CJ . Then find the magnitude of CJ .
8
4 4
8 4
x
8
8
O 4
8y
4
4
J (3, 5, 4)
Find an ordered triple to represent u in each equation if v 4, 3, 5,
w 2, 6, 1, and z 3, 0, 4.
3
24. u v w
4
1
23. u v w 2z
2
2
25. u 3v
w 2z
3
26. u 0.75v
0.25w
27. u 4w
z
22. u 6
w 2z
B
2
2
28. Find an ordered triple to represent the sum f 3g
h , if f 3, 4.5, 1,
3
5
g 2, 1, 6, and h 6, 3, 3.
Write LB as the sum of unit vectors.
C
29. L(2, 2, 7), B(5, 6, 2)
30. L(6, 1, 0), B(4, 5, 1)
31. L(9, 7, 11), B(7, 3, 2)
32. L(12, 2, 6), B(8, 7, 5)
33. L(1, 2, 4), B(8, 5, 10)
34. L(9, 12, 5), B(6, 5, 5)
35. Show that G
1G2 G2G1.
36. If m m1, m2, m3 , then m
is defined as m1, m2, m3 . Show that
 m

m
www.amc.glencoe.com/self_check_quiz
Lesson 8-3 Vectors in Three-Dimensional Space 503
l Wor
ea
Ap
on
ld
R
Applications
and Problem
Solving
p li c a ti
37. Physics
An object is in equilibrium if the magnitude of the resultant force on it
is zero. Two forces on an object are represented by 3, 2, 4 and 6, 2, 5. Find a
third vector that will place the object in equilibrium.
38. Critical Thinking
Find the midpoint of v that extends from V(2, 3, 6) to
W(4, 5, 2).
39. Computer Games
Nate Rollins is designing a computer game. In the game, a
knight is standing at point (1, 4, 0) watching a wizard sitting at the top of a tree.
In the computer screen, the tree is one unit high, and its base is at (2, 4, 0). Find
the displacement vector for each situation.
a. from the origin to the knight
b. from the bottom of the tree to the knight
Find the vector c that must be added to a 1, 3, 1 to
obtain b 3, 1, 5.
40. Critical Thinking
41. Aeronautics
Dr. Chiaki Mukai is Japan’s first female astronaut. Suppose
she is working inside a compartment shaped like a cube with sides 15
feet long. She realizes that the tool she needs is diagonally in the
opposite corner of the compartment.
a. Draw a diagram of the situation described above.
b. What is the minimum distance she has to glide to secure the tool?
c. At what angle to the floor must she launch herself?
42. Chemistry
Dr. Alicia Sanchez is a researcher for a pharmaceutical firm.
She has graphed the structure of a molecule with atoms having
1 2 2
3
3
, 0 , and C 1, , positions A (2, 0, 0), B 1, 3
. She needs
to have every atom in this molecule equidistant from each other. Has
she achieved this goal? Explain why or why not.
Dr. Chiaki Mukai
Mixed
Review
43. Find the sum of the vectors 3, 5 and 1, 2 algebraically. (Lesson 8-2)
44. Find the coordinates of point D such that AB and CD are equal vectors for
points A(5, 2), B(3, 3), and C(0, 0). (Lesson 8-1)
45. Verify that cot X (sin 2X) (1 cos 2X) is an identity. (Lesson 7-4)
2
46. If cos and 0° 90°, find sin . (Lesson 7-1)
3
47. State the amplitude and period for the function y 6 sin . (Lesson 6-4)
2
48. Physics If a pulley is rotating at 16 revolutions per minute, what is its rate in
radians per second? (Lesson 6-2)
49. Determine if (7, 2) is a solution for y 4x2 3x 5. Explain. (Lesson 3-3)
50. SAT/ACT Practice
You have added the same positive quantity to the numerator
and denominator of a fraction. The result is
A
B
C
D
E
greater than the original fraction.
less than the original fraction.
equal to the original fraction.
one-half the original fraction.
cannot be determined from the information given.
504 Chapter 8 Vectors and Parametric Equations
Extra Practice See p. A40.
In addition to being
an actor, Emilio Estevez is an
p li c a ti
avid stock car driver. Drivers in
stock car races must constantly shift gears to
maneuver their cars into competitive positions.
A gearshift rotates about the connection to the
transmission. The rate of change of the rotation
of the gearshift depends on the magnitude of
the force exerted by the driver and on the
perpendicular distance of its line of action
from the center of rotation. You will use vectors
in Example 4 to determine the force on a gearshift.
AUTO RACING
Transmission
on
Ap
• Find the inner
and cross
products of two
vectors.
• Determine
whether two
vectors are
perpendicular.
l Wor
ea
ld
OBJECTIVES
Perpendicular Vectors
R
8-4
Gearshift
3rd-4th
1st-2nd
Reverse
In physics, torque is the measure of the effectiveness of a force in turning an
object about a pivot point. We can use perpendicular vectors to find the torque
of a force.
Let a and b be perpendicular vectors, and let BA be a vector between their
terminal points as shown. Then the magnitudes of a, b , and BA must satisfy the
Pythagorean Theorem.
B(b1, b2)
2 a
2
2 b
BA
Now use the definition of magnitude
2.
of a vector to evaluate BA
BA
b
a
O
A(a1, a2)
 BA
(a1 b1)2 (a2 b2 )2
Definition of magnitude
2 (a b )2 (a b )2
BA
1
1
2
2
Square each side.
2 a 2 2a b b 2 a 2 2a b b 2
BA
1
1 1
1
2
2 2
2
Simplify.
2 (a 2 a 2 ) (b 2 b 2 ) 2(a b a b )
BA
1
2
1
2
1 1
2 2
Group the squared terms.
2 a
2 2(a b a b )
BA
2 b
1 1
2 2
a
2 a12 a22
2 b 2 b 2
b
1
2
2 a
2 if
Compare the resulting equation with the original one. BA
2 b
and only if a1b1 a2b2 0.
The expression a1b1 a2b2 is frequently used in the study of vectors. It is
called the inner product of a and b.
Lesson 8-4
Perpendicular Vectors
505
Inner Product
of Vectors in
a Plane
If a and b are two vectors, a1, a2 and b1, b2, the inner product of a and
b is defined as a b a1b1 a2b2.
a b is read “a dot b” and is often called the dot product.
Two vectors are perpendicular if and only if their inner product is zero. That
b b1, b2 are perpendicular if a b 0.
is, vectors a a1, a2 and a b a1b1 a2b2
Let a1b1 a2b2 0 if
a1b1 a2b2
a1
b
2
a2
b1
a2 0, b1 0
Since the ratio of the components can also be thought of as the slopes of the
line on which the vectors lie, the slopes are opposite reciprocals. Thus, the lines
and the vectors are perpendicular.
Example
p 7, 14, q 2, 1 and m 3, 5. Are any
1 Find each inner product if pair of vectors perpendicular?
a. p q
b. p m
c. q m
p q 7(2) 14(1)
14 14
0
p m 7(3) 14(5)
21 70
91
q m 2(3) (1)(5)
65
1
q are
p and perpendicular.
p and m are
not perpendicular.
q and m are
not perpendicular.
The inner product of vectors in space is similar to that of vectors in a plane.
Inner Product
of Vectors in
Space
If a a1, a2, a3 and b b1, b2, b3, then a b a1b1 a2b2 a3b3.
Just as in a plane, two vectors in space are perpendicular if and only if their
inner product is zero.
Example
506
Chapter 8
a and b if a 3, 1, 1 and b 2, 8, 2.
2 Find the inner product of Are a and b perpendicular?
a b (3)(2) (1)(8) (1)(2)
6 8 (2)
0
a and b are perpendicular since their inner product is zero.
Vectors and Parametric Equations
Another important product involving vectors
M
a b
in space is the cross product. Unlike the inner
product, the cross product of two vectors is a
b
vector. This vector does not lie in the plane of the
a
given vectors, but is perpendicular to the plane
containing the two vectors. In other words, the cross product of two vectors is
perpendicular to both vectors. The cross product of a and b is written a b.
a b is perpendicular to a.
a b is perpendicular to b.
Cross Product
of Vectors in
Space
If a a1, a2, a3 and b b1, b2, b3, then the cross product of a and b
is defined as follows.

a
a b b2
2
 
 

a3
a1 a3
a1 a2
b3 i b1 b3 j b1 b2 k
Look Back
Refer to Lesson 2-5
to review
determinants and
expansion by
minors.
Example
An easy way to remember the coefficients of i , j , k
is to write a determinant as shown and expand by
minors using the first row.
i j k
a1 a2 a3
b1 b2 b3


v and w if v 0, 3, 1 and w 0, 1, 2.
3 Find the cross product of Verify that the resulting vector is perpendicular to v and w.
 
i j k
0
3 1
v w
0 1 2
1 2i 0 2j 0 1k
3 1
0 1
0 3
Expand by minors.
5 i 0 j 0 k
5 i or 5, 0, 0
Find the inner products 5, 0, 0 0, 3, 1 and 5, 0, 0 0, 1, 2.
5(0) 0(3) 0(1) 0
5(0) 0(1) 0(2) 0
Since the inner products are zero, the cross product v w is perpendicular to
both v and w.
In physics, the torque T about a point A created by a force F at a point B is
given by T AB F . The magnitude of T represents the torque in foot-pounds.
Lesson 8-4
Perpendicular Vectors
507
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
4 AUTO RACING Refer to the application at the beginning of the lesson.
Suppose Emilio Estevez is applying a force of 25 pounds along the positive
z-axis to the gearshift of his car. If the center of the connection of the
gearshift is at the origin, the force is applied at the point (0.75, 0, 0.27). Find
the torque.
, the torque of the force at (0.75, 0, 0.27) where
We need to find T
each value is the distance from the origin in feet and F represents the
force in pounds.
To find the magnitude of T , we must first find AB and F.
AB (0.75, 0, 0.27) (0, 0, 0)
0.75 0, 0 0, 0.27 0 or 0.75, 0, 0.27
or 0, 0, 25.
Any upward force is measured along the z-axis, so F 25k
Now, find T.
T AB F
i
j
0.75 0
00.0 0

Emilio Estevez
0
0
k
0.27
0.25

 
0.27 0.75
i
0.25
00.0
 

0.27 0.75 0 j
k
0.25
00.0 0
0 i 18.75 j 0 k or 0, 18.75, 0
Find the magnitude of T.
 T
02 (18.7
5)2 02
(18.
75)2 or 18.75
The torque is 18.75 foot-pounds.
C HECK
Communicating
Mathematics
FOR
U N D E R S TA N D I N G
Read and study the lesson to answer each question.
1. Compare v w and w v for v 1, 0, 3 and w 1, 2, 4.
2. Show that the cross product of a three-dimensional vector with itself is the zero
vector.
3. Math
Journal Could the inner product of a nonzero vector and itself ever be
zero? Explain why or why not.
Guided
Practice
Find each inner product and state whether the vectors are perpendicular. Write
yes or no.
4. 5, 2 3, 7
508
Chapter 8 Vectors and Parametric Equations
5. 8, 2 4.5, 18
6. 4, 9, 8 3, 2, 2
Find each cross product. Then verify that the resulting vector is perpendicular to
the given vectors.
7. 1, 3, 2 2, 1, 5
8. 6, 2, 10 4, 1, 9
9. Find a vector perpendicular to the plane containing the points (0, 1, 2),
(2, 2, 4), and (1, 1, 1).
10. Mechanics
Tikiro places a wrench on a nut and applies a downward force of
32 pounds to tighten the nut. If the center of the nut is at the origin, the force is
applied at the point (0.65, 0, 0.3). Find the torque.
E XERCISES
Find each inner product and state whether the vectors are perpendicular. Write
yes or no.
Practice
A
B
11. 4, 8 6, 3
12. 3, 5 4, 2
13. 5, 1 3, 6
14. 7, 2 0, 2
15. 8, 4 2, 4
16. 4, 9, 3 6, 7, 5
17. 3, 1, 4 2, 8, 2
18. 2, 4, 8 16, 4, 2
19. 7, 2, 4 3, 8, 1
20. Find the inner product of a and b, b and c , and a and c if a 3, 12,
b 8, 2, and c 3, 2. Are any of the pairs perpendicular? If so,
which one(s)?
Find each cross product. Then verify that the resulting vector is perpendicular to
the given vectors.
21. 0, 1, 2 1, 1, 4
22. 5, 2, 3 2, 5, 0
23. 3, 2, 0 1, 4, 0
24. 1, 3, 2 5, 1, 2
25. 3, 1, 2 4, 4, 0
26. 4, 0, 2 7, 1, 0
27. Prove that for any vector a, a (a
) 0.
28. Use the definition of cross products to prove that for any vectors a, b , and c,
b c ) ( a b ) (
a c ).
a (
Find a vector perpendicular to the plane containing the given points.
C
29. (0, 2, 2), (1, 2, 3), and (4, 0, 1)
30. (2, 1, 0), (3, 0, 0), and (5, 2, 0)
31. (0, 0, 1), (1, 0, 1), and (1, 1, 1)
32. Explain whether the equation m n n m is true. Discuss your reasoning.
l Wor
ea
Ap
on
ld
R
Applications
and Problem
Solving
p li c a ti
33. Physiology
Whenever we lift an object, a torque is applied by the biceps
muscle on the lower arm. The elbow acts as the axis of rotation through the
joint. Suppose the muscle is attached 4 centimeters from the joint and you exert
a force of 600 N lifting an object 30° to the horizontal.
a. Make a labeled diagram showing this situation.
b. What is the torque about the elbow?
www.amc.glencoe.com/self_check_quiz
Lesson 8-4 Perpendicular Vectors
509
Let x 2, 3, 0 and y 1, 1, 4. Find the area of the triangle
whose vertices are the origin and the endpoints of x and y.
34. Critical Thinking
35. Business Management
Mr. Toshiro manages a company that supplies a
variety of domestic and imported nuts to supermarkets. He received an order
for 120 bags of cashews, 310 bags of walnuts, and 60 bags of Brazil nuts. The
prices per bag for each type are $29, $18, and $21, respectively.
a. Represent the number of bags ordered and the cost as vectors.
b. Using what you have learned in the lesson about vectors, compute the value
of the order.
The work done by a force F , that displaces an object through a
d
 cos .
distance d is defined as F d . This can also be expressed as F
Alexa is pushing a construction barrel up a ramp 4 feet long into the back of a
truck. She is using a force of 120 pounds in a horizontal direction and the ramp
is 45° from the horizontal.
36. Physics
a. Sketch a drawing of the situation.
b. How much work is Alexa doing?
37. Architecture
Steve Herr is an architect in
Minneapolis, Minnesota. His latest project is
designing a park. On the blueprint, the park is
determined by a plane which contains the points at
(1, 0, 3), (2, 5, 0), and (3, 1, 4). One of the features
of the park is a monument that must be
perpendicular to the ground.
a. Find a nonzero vector, representing the
monument, perpendicular to the plane defined
by the given points.
b. Explain how you know that the vector is
perpendicular to the plane defining the park.
z
38. Geometry
A parallelepiped is a prism whose
opposite faces are all parallelograms.
a. Determine the volume of the parallelepiped using
the expression p (
q r ).
x
y
r
(0,0,1)
p
q
b. Write a 3 3 matrix using the three vectors and
calculate its determinant. How does this value
compare to your answer in part a?
(2,1,4)
(3,1,5)
If v 1, 2, w 1, 2, and
u 5, 12, for what scalar k will the vector
kv
w be perpendicular to u?
39. Critical Thinking
Let a a1, a2 and b b1, b2 . Use the Law of Cosines to show that if
the measure of the angle between a and b , , is any value, then the inner
 cos . (Hint: Refer to the proof of inner product using
b a
b
product a the Pythagorean Theorem on page 505.)
40. Proof
510
Chapter 8 Vectors and Parametric Equations
Mixed
Review
41. Given points A(3, 3, 1) and B(5, 3, 2), find an ordered triple that represents
AB . (Lesson 8-3)
42. Write the ordered pair that represents DE for the
points on the graph. Then find the magnitude of DE .
(Lesson 8-2)
43. Write the equation 4x y 6 in normal form. Then
find p, the measure of the normal, and , the angle it
makes with the positive x-axis. (Lesson 7-6)
y
D
O
x
E
44. Solve ABC if A 36°, b 13, and c 6. Round angle measures to the nearest
minute and side measures to the nearest tenth. (Lesson 5-8)
45. Utilities
A utility pole is braced by a cable attached to it
at the top and anchored in a concrete block at ground
level, a distance of 4 meters from the base of the pole. If
the angle between the cable and the ground is 73°, find the
height of the pole and the length of the cable to the
nearest tenth of a meter. (Lesson 5-4)
4m
46. Solve 3
3x 4 10. (Lesson 4-7)
47. SAT/ACT Practice
Let x be an integer greater than 1. What is the least value of
x for which a2 b3 x for some integers a and b?
A 81
B 64
C 4
D 2
E 9
MID-CHAPTER QUIZ
Use a ruler and a protractor to draw a
vector with the given magnitude and
direction. Then find the magnitude of the
horizontal and vertical components of the
vector. (Lesson 8-1)
1. 2.3 centimeters, 46°
Find each inner product and state whether
the vectors are perpendicular. Write yes
or no. (Lesson 8-4)
7. 3, 6 4, 2
8. 3, 2, 4 1, 4, 0
2. 27 millimeters, 245°
Write the ordered pair or ordered triple
that represents CD . Then find the magnitude
of CD . (Lessons 8-2 and 8-3)
3. C(9, 2), D(4, 3)
9. Find the cross product 1, 3, 2 2, 1, 1.
Then verify that the resulting vector is
perpendicular to the given vectors.
(Lesson 8-4)
4. C(3, 7, 1), D(5, 7, 2)
Find an ordered pair or ordered triple to
represent r in each equation if s 4, 3,
u 1, 3, 8, and
t 6, 2, v 3, 9, 1. (Lessons 8-2 and 8-3)
5. r t 2 s
6. r 3
u v
Extra Practice See p. A41.
10. Entomology
Suppose the flight of a
housefly passed through points at
(2, 0, 4) and (7, 4, 6), in which each unit
represents a meter. What is the
magnitude of the displacement the
housefly experienced in traveling
between these points? (Lesson 8-3)
Lesson 8-4 Perpendicular Vectors
511
GRAPHING CALCULATOR EXPLORATION
8-4B Finding Cross Products
An Extension of Lesson 8-4
OBJECTIVE
• Use a graphing
calculator
program to
obtain the
components
of the cross
product of
two vectors in
space.
The following graphing calculator program allows you to input the
components of two vectors p a, b, c and q x, y, z in space and obtain the
components of their cross product.
PROGRAM: CROSSP
:Disp “SPECIFY (A, B, C)”
:Input A
:Input B
:Input C
:Disp “SPECIFY (X, Y, Z)”
:Input X
:Input Y
:Input Z
:Disp “CROSS PROD OF”
:Disp “(A, B, C) AND”
:Disp “(X, Y, Z) IS”
:Disp BZ - CY
:Disp CX - AZ
:Disp AY - BX
:Stop
Graphing
Calculator
Programs
To download this
program, visit
www.amc.
glencoe.com
Enter this program on your calculator and use it as needed to complete the
following exercises.
TRY THESE
Use a graphing calculator to determine each cross product.
1. 7, 9, 1 3, 4, 5
2. 8, 14, 0 2, 6, 12
3. 5, 5, 5 4, 4, 4
4. 3, 2 1 6, 3, 7
5. 1, 6, 0 2, 5, 0
6. 4, 0, 2 6, 0, 13
It can be proved that if u and v are adjacent sides of a parallelogram, then the
v . Find the area of the parallelogram having
area of the parallelogram is u
the given vectors as adjacent sides.
7. u 2, 4, 1, v 0, 6, 3
WHAT DO YOU
THINK?
512
8. u 1, 3, 2, v 9, 7, 5
9. What instructions could you insert at the end of the program to have the
program display the magnitude of the vectors resulting from the cross
products of the vectors above?
Chapter 8 Vectors and Parametric Equations
8-5
Applications with Vectors
SPORTS
on
R
Ty Murray was a recent
World Championship Bull Rider in the
p li c a ti
National Finals Rodeo in Las Vegas,
Nevada. One of the most dangerous tasks, besides
riding the bulls, is the job of getting the bulls back
into their pens after each event. Experienced
handlers, dressed as clowns, expertly rope the
animals without harming them.
Ap
• Solve problems
using vectors
and right
triangle
trigonometry.
l Wor
ea
ld
OBJECTIVE
Ty Murray has completed his competition ride and
the two rodeo clowns are restraining the bull to
return it to the paddocks. Suppose one clown is
exerting a force of 270 newtons due north and
the other is pulling with a force of 360 newtons
due east. What is the resultant force on the bull?
This problem will be solved in Example 1.
Vectors can represent the forces exerted by the handlers on the bull.
Physicists resolve this force into component vectors. Vectors can be used to
represent any quantity, such as a force, that has magnitude and direction.
Velocity, weight, and gravity are some of the quantities that physicists represent
with vectors.
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
1 SPORTS Use the information above to describe the resultant force on
the bull.
a. Draw a labeled diagram that
represents the forces.
N
F
1
F
Let F 1 and F 2 represent the forces
exerted by the clowns. Then F
represents the resultant. Let represent the angle F makes with the
east-west or x-axis.
270N
270N
360N
W
b. Determine the resultant force exerted
on the bull by the two clowns.
S
2 E
F
2 F
2 F
2
F
1
2
2 (270)2 (360)2
F
2 202,500
F
2 202,50
F
0 or 450
The resultant force on the bull is 450 newtons.
1 pound 4.45 newtons so 450 N 101.12 lb
Lesson 8-5
Applications with Vectors
513
c. Find the angle the resultant force makes with the east-west axis.
Use the tangent ratio.
270
360
tan 270
360
tan1 36.9° north of due east
The resultant force is applied at an angle of 36.9° north of due east.
In physics, if a constant force F displaces an object an amount represented
by d , it does work on the object. The amount of work is given by W F d.
Example
2 Alvaro works for a package delivery service. Suppose he is pushing a cart
full of packages weighing 100 pounds up a ramp 8 feet long at an incline of
25°. Find the work done by gravity as the cart moves the length of the ramp.
Assume that friction is not a factor.
y
First draw a labeled diagram representing the
forces involved. Let OQ represent the force of
gravity, or weight. The weight has a magnitude
of 100 pounds and its direction is down. The
corresponding unit vector is 0 i 100 j .
So, F 0 i 100 j . The application of the force
is OP , and it has a magnitude of 8 feet.
P (x, y)
y
O
25˚
x
T
x
Q (0, 100)
Write OP as d x i y j and use trigonometry to
find x and y.
x
8
cos 25° y
8
sin 25° x 8 cos 25°
y 8 sin 25°
x 7.25
y 3.38
Then, d 7.25 i 3.38 j
Apply the formula for determining the work done by gravity.
W F d
W 0 i 100 j 7.25 i 3.38 j W 0 338 or 338
Work done by gravity is negative when an object is lifted or raised. As the cart
moves the length of the ramp, the work done by gravity is 338 ft-lb.
514
Chapter 8
Vectors and Parametric Equations
Sometimes there is no motion when several forces are at work on an object.
This situation, when the forces balance one another, is called equilibrium. Recall
that an object is in equilibrium if the resultant force on it is zero.
Example
3 Ms. Davis is hanging a sign for
her restaurant. The sign is
supported by two lightweight
support bars as shown in the
diagram. If the bars make a 30°
angle with each other, and the
sign weighs 200 pounds, what
are the magnitudes of the forces
exerted by the sign on each
support bar?
2
F
30˚
F1
w 200 N
F
F1 represents the force exerted on bar 1 by the sign, F2 represents the force
exerted on bar 2 by the sign, and Fw represents the weight of the sign.
Remember that equal vectors
have the same magnitude and
direction. So by drawing another
vector from the initial point of F1
to the terminal point of Fw, we
can use the sine and cosine ratios
 and F
.
to determine F
1
2
2
F
30˚
30˚
2
F
w 200 N
F
20
0
sin 30° 
F2
200
 F
2
sin 30°
Divide each side by sin 30° and
.
multiply each side by F
2
 400
F
2
 can be determined by using cos 30°.
Likewise, F
1

F 
400
1
cos 30°  400 cos 30°
F
1
 346
F
1
The sign exerts a force of about 346 pounds on bar 1 and
a force of 400 pounds on bar 2.
Lesson 8-5
Applications with Vectors
515
If the vectors representing forces at equilibrium are drawn tip-to-tail, they will
form a polygon.
Example
4 A lighting system for a theater is supported equally by two cables
suspended from the ceiling of the theater. The cables form a 140° angle with
each other. If the lighting system weighs 950 pounds, what is the force
exerted by each of the cables on the lighting system?
Draw a diagram of the situation. Then draw the vectors tip-to-tail.
140˚
x lb
x lb
x lb
950 lb
40˚
x lb
Look Back
Refer to Lessons 5-6
through 5-8 to
review Law of
Sines and Law
of Cosines.
950 lb
Since the triangle is isosceles, the base angles are congruent. Thus, each base
180° 40°
2
angle measures or 70°. We can use the Law of Sines to find the force
exerted by the cables.
x
950
Law of Sines
sin 40°
sin 70°
950 sin 70°
x sin 40°
x 1388.81
The force exerted by each cable is about 1389 pounds.
C HECK
Communicating
Mathematics
FOR
U N D E R S TA N D I N G
Read and study the lesson to answer each question.
1. Determine which would require more force—pushing an object up to the top of
an incline, or lifting it straight up. Assume there is no friction.
2. Describe how the force exerted by the cables in Example 4 is affected if the
angle between the cables is increased.
3. Explain what it means for forces to be in equilibrium.
Guided
Practice
4. Make a sketch to show the forces acting on a ship traveling at 23 knots at an
angle of 17° with the current.
5. Find the magnitude and direction of the resultant
vector for the diagram.
170 N
55˚
300 N
6. A 100-newton force and a 50-newton force act on the same object. The angle
between the forces measures 90°. Find the magnitude of the resultant force and
the angle between the resultant force and the 50-pound force.
516
Chapter 8 Vectors and Parametric Equations
7. Denzel pulls a wagon along level ground with a force of 18 newtons on the
handle. If the handle makes an angle of 40° with the horizontal, find the
horizontal and vertical components of the force.
8. A 33-newton force at 90° and a 44-newton force at 60° are exerted on an object.
What is the magnitude and direction of a third force that produces equilibrium
on the object?
9. Transportation
Two ferry landings are directly across a river from each other.
A ferry that can travel at a speed of 12 miles per hour in still water is attempting
to cross directly from one landing to the other. The current of the river is 4
miles per hour.
a. Make a sketch of the situation.
b. If a heading of 0° represents the line between the two landings, at what angle
should the ferry’s captain head?
E XERCISES
Make a sketch to show the given vectors.
Practice
A
10. a force of 42 newtons acting on an object at an angle of 53° with the ground
11. an airplane traveling at 256 miles per hour at an angle of 27° from the wind
12. a force of 342 pounds acting on an object while a force of 454 pounds acts on
the same object an angle of 94° with the first force
Find the magnitude and direction of the resultant vector for each diagram.
13.
14.
65 mph
15.
115 km/h
300˚
390 N
50 mph
120˚
60˚
425 N
B
115 km/h
16. What would be the force required to push a 100-pound object along a ramp that
is inclined 10° with the horizontal?
17. What is the magnitude and direction of the resultant of a 105-newton force along
the x-axis and a 110-newton force at an angle of 50° to one another?
18. To keep a 75-pound block from sliding down an incline, a 52.1-pound force is
exerted on the block along the incline. Find the angle that the incline makes
with the horizontal.
19. Find the magnitude and direction of the resultant of two forces of 250 pounds
and 45 pounds at angles of 25° and 250° with the x-axis, respectively.
20. Three forces with magnitudes of 70 pounds, 40 pounds, and 60 pounds act on an
object at angles 330°, 45°, and 135°, respectively, with the positive x-axis. Find
the direction and magnitude of the resultant of these forces.
21. A 23-newton force acting at 60° above the horizontal and a second 23-newton
force acting at 120° above the horizontal act concurrently on a point. What is the
magnitude and direction of a third force that produces equilibrium?
www.amc.glencoe.com/self_check_quiz
Lesson 8-5 Applications with Vectors
517
C
22. An object is placed on a ramp and slides to the ground. If the ramp makes an
angle of 40° with the ground and the object weighs 25 pounds, find the
acceleration of the object. Assume that there is no friction.
23. A force of 36 newtons pulls an object at an angle of 20° north of due east. A
second force pulls on the object with a force of 48 newtons at an angle of 42°
south of due west. Find the magnitude and direction of the resultant force.
24. Three forces in a plane act on an object. The forces are 70 pounds, 115 pounds
and 135 pounds. The 70 pound force is exerted along the positive x-axis. The
115 pound force is applied below the x-axis at a 120° angle with the 70 pound
force. The angle between the 115-pound and 135-pound forces is 75°, and
between the 135-pound and 70-pound forces is 165°.
a. Make a diagram showing the forces.
b. Are the vectors in equilibrium? If not, find the magnitude and the direction
of the resultant force.
l Wor
ea
Ap
on
ld
R
Applications
and Problem
Solving
p li c a ti
25. Physics
While pulling a stalled car, a tow truck’s cable makes an angle of
50° above the road. If the tension on the tow truck’s cable is 1600 newtons,
how much work is done by the truck on the car pulling it 1.5 kilometers
down the road?
26. Critical Thinking
The handle of a lawnmower you are pushing makes an angle
of 60° with the ground.
a. How could you increase the horizontal forward force you are applying
without increasing the total force?
b. What are some of the disadvantages of doing this?
27. Boating
A sailboat is headed east at 18 mph
relative to the water. A current is moving the
water south at 3 mph.
a. What is the angle of the path of the
sailboat?
b. What is the sailboat’s speed with respect
to the ocean floor?
28. Physics
Suzanne is pulling a wagon loaded
with gardening bricks totaling 100 kilograms.
She is applying a force of 100 newtons on the
handle at 25° with the ground. What is the
horizontal force on the wagon?
29. Entertainment
A unicyclist is performing
on a tightrope at a circus. The total weight
of the performer and her unicycle is
155 pounds. How much tension is being
exerted on each part of the cable?
6.2˚
5.5˚
155 lb
518
Chapter 8 Vectors and Parametric Equations
30. Critical Thinking
Chaz is using a rope tied to his tractor to remove an old tree
stump from a field. Which method given below—a or b—will result in the
greatest force applied to the stump? Assume that the tractor will exert the same
amount of force using either method. Explain your answer.
a. Tie the rope to the stump and pull.
b. Tie one end to the stump and the other end to a nearby pole. Then pull on
the rope perpendicular to it at a point about halfway between the two.
31. Travel
A cruise ship is arriving at the port of Miami from the Bahamas. Two
tugboats are towing the ship to the dock. They exert a force of 6000 tons along
the axis of the ship. Find the tension in the towlines if each tugboat makes a
20° angle with the axis of the ship.
32. Physics
A painting weighing 25 pounds is supported at the top corners by a
taut wire that passes around a nail embedded in the wall. The wire forms a
120° angle at the nail. Assuming that the wire rests on the nail at its midpoint,
find the pull on the wires.
Mixed
Review
33. Find the inner product of u and v if u 9, 5, 3 and v 3, 2, 5. Are the
vectors perpendicular? (Lesson 8-4)
34. If A (12, 5, 18) and B (0, 11, 21), write the ordered triple that represents
AB . (Lesson 8-3)
35. Sports
Sybrina Floyd hit a golf ball on an approach shot with an initial velocity
of 100 feet per second. The distance a golf ball travels is found by the formula
2v 2
g
0
d sin cos , where v0 is the initial velocity, g is the acceleration due to
gravity, and is the measure of the angle that the initial path of the ball makes
with the ground. Find the distance Ms. Floyd’s ball traveled if the measure of
the angle between the initial path of the ball and the ground is 65° and the
acceleration due to gravity is 32 ft/s2. (Lesson 7-4)
36. Write a polynomial function to model the set of data. (Lesson 4-8)
x
1.5
1
0.5
0
0.5
1
1.5
2
2.5
f (x)
9
8
6.5
4.3
2
2.7
4.1
6.1
7.8
37. Food Processing
A meat packer makes a kind of sausage using beef, pork,
cereal, fat, water, and spices. The minimum cereal content is 12%, the minimum
fat content is 15%, the minimum water content is 6.5%, and the spices are 0.5%.
The remaining ingredients are beef and pork. There must be at least 30% beef
content and at least 20% pork content for texture. The beef content must equal
or exceed the pork content. The cost of all of the ingredients except beef and
pork is $32 per 100 pounds. Beef can be purchased for $140 per 100 pounds and
pork for $90 per 100 pounds. Find the combination of beef and pork for the
minimum cost. What is the minimum cost per 100 pounds? (Lesson 2-6)
Let *x be defined as *x x3 x.
What is the value of *4 *(3)?
38. SAT/ACT Practice
A 84
B 55
D 22
E 4
C 10
Lesson 8-5 Applications with Vectors
519
8-6
Vectors and Parametric
Equations
AIR RACING
on
R
Air racing’s origins date back to the early 1900s when
aviation began. One of the most important races is the National
p li c a ti
Championship Air Race held every year in Reno, Nevada. In the
competition, suppose pilot Bob Hannah passes the starting gate at a speed of 410.7
mph. Fifteen seconds later, Dennis Sanders flies by at 412.9 mph. They are racing
for the next 500 miles. This information will be used in Example 4.
Ap
• Write vector
and parametric
equations of
lines.
• Graph
parametric
equations.
l Wor
ea
ld
OBJECTIVES
The relative positions of the airplanes are dependent upon their velocities at
a given moment in time and their starting positions. Vector equations and
equations known as parametric equations allow us to model that movement.
In Lesson 1-4, you learned how to write the equation of a line in the
coordinate plane. For objects that are moving in a straight line, there is a
more useful way of writing equations for the line describing the object’s
path using vectors.
If a line passes through the points
P1 and P2 and is parallel to the vector
a a1, a2, the vector P
1P2 is also parallel
to a . Thus, P
P
must
be
a scalar multiple of a.
1 2
Using the scalar t, we can write the equation
P
a . Notice that both sides of the
1P2 t equation are vectors. This is called the vector
equation of the line. Since a is parallel to the
line, it is called a direction vector. The scalar
t is called a parameter.
Vector
Equation
of a Line
y
P1(x1, y1)
P2(x2, y2)
O
a
x
(a1, a2)
A line through P1(x1, y1) parallel to the vector a a1, a2 is defined by the
set of points P1(x1, y1) and P2(x 2, y 2) such that P
a for some real
1P2 t number t. Therefore, x2 x1, y2 y1 t a1, a2.
In Lesson 8-2, you learned that the vector from (x1, y1) to (x, y) is x x1, y y1.
Example
1 Write a vector equation describing a line passing through P1(1, 4) and
parallel to a 3, 2.
Let the line through P1(1, 4) be parallel to a . For any point P(x, y) on ,
P1P x 1, y 4. Since P1P is on and is parallel to a, P1P t a , for some
value t. By substitution, we have x 1, y 4 t 3, 2.
Therefore, the equation x 1, y 4 t 3, 2 is a vector equation describing
all of the points (x, y) on parallel to a through P1(1, 4).
520
Chapter 8
Vectors and Parametric Equations
A vector equation like the one in Example 1 can be used to describe the
coordinates for a point on the line for any value of the parameter t. For example,
when t 4 we can write the equation x 1, y 4 43, 2 or (12, 8). Then
write the equation x 1 12 and y 4 8 to find the ordered pair (13, 4).
Likewise, when t 0, the ordered pair (1, 4) results. The parameter t often
represents time. (In fact, that is the reason for the choice of the letter t.)
An object moving along the line described by the vector equation
x 1, y 4 t 3, 2 will be at the point (1, 4) at time t 0 and will be at the
point (13, 4) at time t 4.
As you have seen, the vector equation x x1, y y1 t a1, a2 can be
written as two equations relating the horizontal and vertical components of these
two vectors separately.
x x1 ta1
y y1 ta2
x x1 ta1
y y1 ta2
The resulting equations, x x1 ta1 and y y1 ta2, are known as
parametric equations of the line through P1(x1, y1) parallel to a a1, a2.
Parametric
Equations
of a Line
A line through P1(x1, y1) that is parallel to the vector a a1, a2 has the
following parametric equations, where t is any real number.
x x1 ta1
y y1 ta2
If we know the coordinates of a point on a line and its direction vector, we
can write its parametric equations.
Example
q 6, 3 and passing
2 Find the parametric equations for a line parallel to through the point at (2, 4). Then make a table of values and graph the
line.
Use the general form of the parametric equations of a line with a1, a2 6, 3
and x1, y1 2, 4.
x x1 ta1
x 2 t(6)
x 2 6t
y y1 ta2
y 4 t (3)
y 4 3t
Now make a table of values for t.
Evaluate each expression to find
values for x and y.
Then graph the line.
(8, 1)
y
O x
(2, 4)
t
x
y
1
08
01
0
02
04
1
4
07
2
10
10
Lesson 8-6
Vectors and Parametric Equations
521
Notice in Example 2 that each value of t establishes an ordered pair (x, y)
whose graph is a point. As you have seen, these points can be considered the
position of an object at various times t. Evaluating the parametric equations
for a value of t gives us the coordinates of the position of the object after t units
of time.
If the slope-intercept form of the equation of a line is given, we can write
parametric equations for that line.
Example
3 Write parametric equations of y 4x 7.
In the equation y 4x 7, x is the independent variable, and y is the
dependent variable. In parametric equations, t is the independent variable, and
x and y are dependent variables. If we set the independent variables x and t
equal, we can write two parametric equations in terms of t.
xt
y 4t 7
y
y 4x 7
Parametric equations for the line are
x t and y 4t 7.
xt
y 4t 7
By making a table of values for t and evaluating
each expression to find values for x and y and
graphing the line, the parametric equations
x t and y 4t 7 describe the same line
as y 4x 7.
O
x
We can use vector equations and parametric equations to model physical
situations, such as the National Championship Air Race, where t represents time
in hours.
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
4 AIR RACING Refer to the application at the beginning of the lesson. Use
parametric equations to model the situation. Assume that both planes
maintain a constant speed.
a. How long is it until the second plane overtakes the first?
b. How far have both planes traveled when the second plane overtakes
the first?
a. First, write a set of parametric equations to represent each airplane’s
position at t hours.
Airplane 1: x 410.7t
Airplane 2: x 412.9(t 0.0042)
x vt
15 s 0.0042 h
Since the time at which the second plane overtakes the first is when
they have traveled the same distance, set the two expressions for x
equal to each other.
410.7t 412.9(t 0.0042)
410.7t 412.9t 1.73418
1.73418 2.2t
0.788 t
In about 0.788 hour or 47 minutes, the second plane overtakes the first.
522
Chapter 8
Vectors and Parametric Equations
b. Use the time to find the distance traveled when the planes pass.
x 410.7t
x 410.7(0.788)
x 323.6316 or about 323.6 miles
Since the speeds are given in tenths
of mph, we round the final answer
to the nearest tenth.
The planes have traveled about 323.6 miles when the second plane overtakes
the first plane.
We can also write the equation of a line in slope-intercept or standard form if
we are given the parametric equations of the line.
Example
5 Write an equation in slope-intercept form of the line whose parametric
equations are x 5 4t and y 2 3t.
Solve each parametric equation for t.
x 5 4t
x 5 4t
y 2 3t
y 2 3t
x5
t
4
y2
t
3
Use substitution to write an equation for the line without the variable t.
x5
(y 2)
4
3
Substitution
(x 5)(3) 4(y 2)
3x 15 4y 8
3
4
Cross multiply.
Simplify.
7
4
y x C HECK
Communicating
Mathematics
FOR
Solve for y.
U N D E R S TA N D I N G
Read and study the lesson to answer each question.
1. Describe the graph of the parametric equations x 3 4t and y 1 2t.
2. Explain how to find the parametric equations for the line through the point at
(3, 6), parallel to the vector v i 2 j .
3. Describe the line having parametric equations x 1 t and y t. Include the
slope of the line and the y-intercept in your description.
Guided
Practice
Write a vector equation of the line that passes through point P and is parallel
to a . Then write parametric equations of the line.
4. P(4, 11), a 3, 8
5. P(1, 5), a 7, 2
Write parametric equations of each line with the given equation.
6. 3x 2y 5
7. 4x 6y 12
Lesson 8-6 Vectors and Parametric Equations
523
Write an equation in slope-intercept form of the line with the given parametric
equations.
8. x 4t 3
9. x 9t
y 5t 3
y 4t 2
10. Set up a table of values and then graph the line whose parametric equations are
x 2 4t and y 1 t.
11. Sports
A wide receiver catches a ball and begins to run for the endzone
following a path defined by x 5, y 50 t 0, 10. A defensive player
chases the receiver as soon as he starts running following a path defined by
x 10, y 54 t 0.9, 10.72.
a. Write parametric equations for the path of each player.
b. If the receiver catches the ball on the 50-yard line (y 50), will he reach the
goal line (y 0) before the defensive player catches him?
E XERCISES
Practice
Write a vector equation of the line that passes through point P and is parallel to
a . Then write parametric equations of the line.
A
12. P(5, 7), a 2, 0
13. P(1, 4), a 6, 10
14. P(6, 10), a 3, 2
15. P(1, 5), a 7, 2
16. P(1, 0), a 2, 4
17. P(3, 5), a 2, 5
Write parametric equations of each line with the given equation.
B
18. y 4x 5
19. 3x 4y 7
20. 2x y 3
21. 9x y 1
22. 2x 3y 11
23. 4x y 2
24. Write parametric equations for the line passing through the point at (2, 5)
and parallel to the line 3x 6y 8.
Write an equation in slope-intercept form of the line with the given parametric
equations.
25. x 2t
y1t
28. x 4t 8
y3t
C
1
2
26. x 7 t
y 3t
29. x 3 2t
y 1 5t
27. x 4t 11
yt3
30. x 8
y 2t 1
31. A line passes through the point at (11, 4) and is parallel to a 3, 7.
a. Write a vector equation of the line.
b. Write parametric equations for the line.
c. Use the parametric equations to write the equation of the line in slope-
intercept form.
Graphing
Calculator
Use a graphing calculator to set up a table of values and then graph each line
from its parametric form.
32. x 5t
y 4 t
524
Chapter 8 Vectors and Parametric Equations
33. x 3t 5
y1t
34. x 1 t
y1t
www.amc.glencoe.com/self_check_quiz
35. Geometry
A line in a plane is defined by the parametric equations
x 2 3t and y 4 7t.
a. What part of this line is obtained by assigning only non-negative values
to t ?
b. How should t be defined to give the part of the line to the left of the y-axis?
l Wor
ea
Ap
on
ld
R
Applications
and Problem
Solving
p li c a ti
36. Critical Thinking
Graph the parametric equations x cos2 t and y sin2t.
37. Navigation
During a military training
exercise, an unmanned target drone has been
detected on a radar screen following a path
represented by the vector equation x, y (3, 4) t 1, 0. A surface to air missile is
launched to intercept it and destroy it. This
missile is following a trajectory represented
by x, y (2, 2) t 1, 2.
a. Write the parametric equations for the path
of the target drone and the missile.
b. Will the missile intercept the target drone?
38. Astronomy
Astronomers have traced the path of two asteroids traveling
through space. At a particular time t , the position of asteroid Ceres can be
represented by (1 t, 4 t, 1 2t). Asteroid Pallas’ path at any time t
can be expressed by (7 2t, 6 2t , 1 t).
a. Write the parametric equations for the path of each asteroid.
b. Do the paths of the asteroids cross? If so, where?
c. Following these paths, will the asteroids collide? If so, where?
Mixed
Review
39. Critical Thinking Find the parametric equations for the line passing through
1
points at , 1, 1 and (0, 5, 8). (Hint: Equations are needed for x, y, and z)
3
40. An airplane flies at 150 km/h and heads 30° south of east. A 50-km/h wind
blows in the direction 25° west of south. Find the ground speed and direction
of the plane. (Lesson 8-5)
41. Find the inner product 1, 3 3, 2 and state whether the vectors are
perpendicular. Write yes or no. (Lesson 8-4)
42. Solve ABC if A 40°, b 16, and a 9. (Lesson 5-7)
43. Approximate the real zero(s) of f(x) x5 3x3 4 to the nearest tenth.
(Lesson 4-5)
3
44. Find the inverse of the function y x 2. (Lesson 3-4)
2
45. Write the standard form of the equation of the line that is parallel to the
graph of y x 8 and passes through the point at (3, 1). (Lesson 1-5)
46. SAT/ACT Practice
A pulley having a 9-inch
diameter is belted to a pulley having a
6-inch diameter, as shown in the figure.
If the larger pulley runs at 120 rpm
(revolutions per minute), how fast does
the smaller pulley run?
A 80 rpm
D 180 rpm
Extra Practice See p. A41.
B 100 rpm
E 240 rpm
9 in.
6 in.
C 160 rpm
Lesson 8-6 Vectors and Parametric Equations
525
GRAPHING CALCULATOR EXPLORATION
8-6B Modeling With
Parametric Equations
An Extension of Lesson 8-6
OBJECTIVE
• Investigate the
use of
parametric
equations.
TRY THIS
You can use a graphing calculator and parametric equations to investigate
real-world situations, such as simulating a 500-mile, two airplane race. Suppose
the first plane averages a speed of 408.7 miles per hour for the entire race. The
second plane starts 30 seconds after the first and averages 418.3 miles per hour.
Write a set of parametric equations to represent each plane’s position at t hours.
This will simulate the race on two parallel race courses so that it is easy to make
a visual comparison. Use the formula x vt.
Plane 1: x 408.7t
y1
x vt
y represents the position of plane 1 on course 1.
Plane 2: x 418.3(t 0.0083)
Remember that plane 2 started 30 seconds
or 0.0083 hour later.
Plane 2 is on course 2.
y2
Set the graphing calculator to parametric and simultaneous modes. Next,
set the viewing window to the following values: Tmin 0, Tmax 5, Tstep .005,
Xmin 0, Xmax 500, Xscl 10, Ymin 0, Ymax = 5, and Yscl 1. Then enter the
parametric equations on the Y= menu. Then press GRAPH to “see the race.”
Which plane finished first? Notice that
the line on top reached the edge of the
screen first. That line represented the
position of the second plane, so plane 2
finished first. You can confirm the conclusion
using the TRACE function. The plane with
the smaller t-value when x is about 500 is the
winner. Note that when x1 is about
500, t 1.225 and when x2 is about
500, t 1.205.
WHAT DO YOU
THINK?
1. How long does it take the second plane to overtake the first?
2. How far have the two planes traveled when the second plane overtakes the
first?
3. How much would the pilot of the first plane have to increase the plane’s
speed to win the race?
526
Chapter 8 Vectors and Parametric Equations
Suppose a professional football
player kicks a football with an initial
p li c a ti
velocity of 29 yards per second at an
angle of 68° to the horizontal. Suppose a kick returner
catches the ball 5 seconds later. How far has the ball
traveled horizontally and what is its vertical height at that
time? This problem will be solved in Example 2.
SPORTS
on
Ap
• Model the
motion of a
projectile using
parametric
equations.
• Solve problems
related to the
motion of a
projectile, its
trajectory, and
range.
l Wor
ea
ld
OBJECTIVES
Modeling Motion Using
Parametric Equations
R
8-7
Objects that are launched, like a football, are called projectiles. The path of a
projectile is called its trajectory. The horizontal distance that a projectile travels
is its range. Physicists describe the motion of a projectile in terms of its position,
velocity, and acceleration. All these quantities can be represented by vectors.
The figure at the right describes the initial
trajectory of a punted football as it leaves the kicker’s
v  and
foot. The magnitude of the initial velocity 
the direction of the ball can be described by a
vector that can be expressed as the sum of its
horizontal and vertical components vx and vy.
v
vy
vx
As the ball moves, gravity will act
on it in the vertical direction. The
horizontal component is unaffected
by gravity. So, discounting air
resistance, the horizontal speed is
constant throughout the flight of the
ball.
g
0
Begin
Maximum
height
Range, R
g
End
g
The vertical component of the velocity of the ball is large and positive at the
beginning, decreasing to zero at the top of its trajectory, then increasing in the
negative direction as it falls. When the ball returns to the ground, its vertical
speed is the same as when it left the kicker’s foot, but in the opposite direction.
Parametric equations can represent the position of the ball relative to the
starting point in terms of the parameter of time.
Lesson 8-7
Modeling Motion Using Parametric Equations
527
In order to find parametric equations that represent the path of a projectile
like a football, we must write the horizontal v x and vertical v y components of the
initial velocity.

v y

v x
cos sin v
xv
 cos v
yv
 sin v

v

Example
1 Find the initial horizontal velocity and vertical velocity of a stone kicked
with an initial velocity of 16 feet per second at an angle of 38° with the
ground.
v
xv
 cos v
yv
 sin v
x 16 cos 38°
v
y 16 sin 38°
v
x 13
v
y 10
The initial horizontal velocity is about 13 feet per second and the initial
vertical velocity is about 10 feet per second.
Because horizontal velocity is unaffected by gravity, it is the magnitude of the
horizontal component of the initial velocity. Therefore, the horizontal position of
a projectile, after t seconds is given by the following equation.
x
v
 cos horizontal distance horizontal velocity time
t
 cos x tv
Since vertical velocity is affected by gravity, we must adjust the vertical
component of initial velocity. By subtracting the vertical displacement due to
gravity from the vertical displacement caused by the initial velocity, we can
determine the height of the projectile after T seconds. The height, in feet or
meters, of a free-falling object affected by gravity is given by the equation
1
2
h gt 2, where g 9.8 m/s2 or 32 ft/s2 and t is the time in seconds.
y
(v
 sin )t
vertical displacement displacement due displacement due
to initial velocity
to gravity
1
gt 2
2
1
2
y tv
 sin gt 2
Therefore, the path of a projectile can be expressed in terms of parametric
equations.
528
Chapter 8
Vectors and Parametric Equations
Parametric
Equations for
the Path of a
Projectile
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
If a projectile is launched at an angle of with the horizontal with an initial
, the path of the projectile may be described by
velocity of magnitude v
these equations, where t is time and g is acceleration due to gravity.
x tv
 cos 1
2
y tv
 sin gt 2
2 SPORTS Refer to the application at the beginning of the lesson.
a. How far has the ball traveled horizontally and what is its vertical height
at that time?
b. Suppose the kick returner lets the ball hit the ground instead of catching
it. What is the hang time, the elapsed time between the moment the ball
is kicked and the time it hits the ground?
a. Write the position of the ball as a pair of parametric equations defining the
path of the ball for any time t in seconds.
1
2
 cos x t v
y tv
 sin gt 2
The initial velocity of 29 yards per second must be expressed as
87 feet per second as gravity is expressed in terms of feet per second
squared.
1
2
x t(87) cos 68°
x 87t cos 68°
y t(87) sin 68° (32)t 2
y 87t sin 68° 16t 2
Find x and y when t 5.
x 87(5) cos 68°
x 163
y 87(5) sin 68° 16(5)2
y3
1
After 5 seconds, the football has traveled about 163 feet or 54 yards
3
horizontally and is about 3 feet or 1 yard above the ground.
36
30
24
Height
18
(yards)
12
6
6
12
18
24
30
36
42
48
54
Distance (yards)
b. Determine when the vertical height is 0 using the equation for y.
y 87t sin 68° 16t 2
y 80.66t 16t 2
y t(80.66 16t)
Factor.
(continued on the next page)
Lesson 8-7
Modeling Motion Using Parametric Equations
529
Now let y 0 and solve for t.
0 80.66 16t
16t 80.66
t 5.04
The hang time is about 5 seconds.
The parametric equations describe the path of an object that is launched
from ground level. Some objects are launched from above ground level. For
example, a baseball may be hit at a height of 3 feet. So, you must add the initial
vertical height to the expression for y. This accounts for the fact that at time 0,
the object will be above the ground.
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
3 SOFTBALL Kaci Clark led the Women’s Pro Softball League in strikeouts in
1998. Suppose she throws the ball at an angle of 5.2° with the horizontal at
a speed of 67 mph. The distance from the pitcher’s mound to home plate is
43 feet. If Kaci releases the ball 2.7 feet above the ground, how far above
the ground is the ball when it crosses home plate?
First, write parametric equations that model the path of the softball.
Remember to convert 67 mph to about 98.3 feet per second.
x tv
 cos x t(98.3)cos 5.2°
x 98.3t cos 5.2°
1
2
y tv
 sin gt 2 h
1
2
y t(98.3)sin 5.2° (32)t 2 2.7
y 98.3t sin 5.2° 16t 2 2.7
Then, find the amount of time that it will take the baseball to travel
43 feet horizontally. This will be the moment when it crosses home
plate.
43 98.3t cos 5.2°
43
98.3 cos 5.2°
t t 0.439
The softball will cross home plate in about 0.44 second.
To find the vertical position of the ball at that time, find y when
t 0.44.
Kaci Clark
y 98.3t sin 5.2° 16t 2 2.7
y 98.3(0.44) sin 5.2° 16(0.44)2 2.7
y 3.522
The softball will be about 3.5 feet above home plate.
530
Chapter 8
Vectors and Parametric Equations
C HECK
Communicating
Mathematics
FOR
U N D E R S TA N D I N G
Read and study the lesson to answer each question.
1. Describe situations in which a projectile travels vertically. At what angle with
the horizontal must the projectile be launched?
2. Describe the vertical velocities of a projectile at its launch and its landing.
3. Explain the effect the angle of a golf club’s head has on the angle of initial
velocity of a golf ball.
Guided
Practice
4. Find the initial vertical velocity of a stone thrown with an initial velocity of
50 feet per second at an angle of 40° with the horizontal.
5. Find the initial horizontal velocity of a discus thrown with an initial velocity of
20 meters per second at an angle of 50° with the horizontal.
Find the initial horizontal velocity and vertical velocity for each situation.
6. A soccer ball is kicked with an initial velocity of 45 feet per second at an angle of
32° with the horizontal.
7. A stream of water is shot from a sprinkler head with an initial velocity of 7.5
meters per second at an angle of 20° with the ground.
8. Meteorology
An airplane flying at an altitude of 3500 feet is dropping
research probes into the eye of a hurricane. The path of the plane is parallel
to the ground at the time the probes are released with an initial velocity of
300 mph.
a. Write the parametric equations that represent the path of the probes.
b. Sketch the graph describing the path of the probes.
c. How long will it take the probes to reach the ground?
d. How far will the probes travel horizontally before they hit the ground?
E XERCISES
Practice
Find the initial horizontal velocity and vertical velocity for each situation.
A
9. a javelin thrown at 65 feet per second at an angle of 60° with the horizontal
10. an arrow released at 47 meters per second at an angle of 10.7° with the horizontal
11. a cannon shell fired at 1200 feet per second at a 42° angle with the ground
12. a can is kicked with an initial velocity of 17 feet per second at an angle of 28°
with the horizontal
13. a golf ball hit with an initial velocity of 69 yards per second at 37° with the
horizontal
14. a kangaroo leaves the ground at an angle of 19° at 46 kilometers per hour
l Wor
ea
Ap
on
ld
R
Applications B
and Problem
Solving
p li c a ti
15. Golf
Professional golfer Nancy Lopez hits a golf ball with a force to produce an
initial velocity of 175 feet per second at an angle of 35° above the horizontal. She
estimates the distance to the hole to be 225 yards.
a. Write the position of the ball as a pair of parametric equations.
b. Find the range of the ball.
www.amc.glencoe.com/self_check_quiz
Lesson 8-7 Modeling Motion Using Parametric Equations
531
16. Projectile Motion
What is the relationship between the angle at which a
projectile is launched, the time it stays in the air, and the distance it covers?
17. Physics
Alfredo and Kenishia are performing a
physics experiment in which they will launch a
model rocket. The rocket is supposed to release
a parachute 300 feet in the air, 7 seconds after
liftoff. They are firing the rocket at a 78° angle
from the horizontal.
a. Find the initial velocity of the rocket.
b. To protect other students from the falling
rockets, the teacher needs to place warning
signs 50 yards from where the parachute is
released. How far should the signs be from the
point where the rockets are launched?
18. Critical Thinking
Is it possible for a projectile to
travel in a circular arc rather than a parabolic
arc? Explain your answer.
19. Critical Thinking
Janelle fired a projectile and measured its range. She
hypothesizes that if the magnitude of the initial velocity is doubled and the
angle of the velocity remains the same, the projectile will travel twice as far as it
did before. Do you agree with her hypothesis? Explain.
C
20. Aviation
Commander Patrick Driscoll flies with the U.S. Navy’s Blue
Angels. Suppose he places his aircraft in a 45° dive at an initial speed of
800 km/h.
a. Write parametric equations to represent the descent path of the aircraft.
b. How far has the aircraft descended after 2.5 seconds?
c. What is the average rate at which the plane is losing altitude during the first
2.5 seconds?
21. Entertainment
The “Human Cannonball” is shot out of a cannon with an initial
velocity of 70 mph 10 feet above the ground at an angle of 35°.
a. What is the maximum range of the cannon?
b. How far from the launch point should a safety net be placed if the “Human
Cannonball” is to land on it at a point 8 feet above the ground?
c. How long is the flight of the “Human Cannonball” from the time he is
launched to the time he lands in the safety net?
22. Critical Thinking
If a circle of radius 1 unit is rolled along the x-axis at a
rate of 1 unit per second, then the path of a point P on the circle is called a
cycloid.
a. Sketch what you think a cycloid must look like. (Hint: Use a coin or some
other circular object to simulate the situation.)
b. The parametric equations of a cycloid are x t sin t and y 1 cos t
where t is measured in radians. Use a graphing calculator to graph the
cycloid. Set your calculator in radian mode. An appropriate range is
Tmin 0, Tmax 18.8, Tstep 0.2, Xmin 6.5, Xmax 25.5, Xscl 2,
Ymin 8.4, Ymax 12.9, and Yscl 1. Compare the results with your sketch.
532
Chapter 8 Vectors and Parametric Equations
23. Entertainment
The Independence Day
fireworks at Memorial Park are fired at an
angle of 82° with the horizontal. The
technician firing the shells expects them
to explode about 300 feet in the air
4.8 seconds after they are fired.
a. Find the initial velocity of a shell fired
from ground level.
b. Safety barriers will be placed around the launch area to protect spectators. If
the barriers are placed 100 yards from the point directly below the explosion
of the shells, how far should the barriers be from the point where the
fireworks are launched?
24. Baseball
Derek Jeter, shortstop for the New York Yankees, comes to bat with
runners on first and third bases. Greg Maddux, pitcher for the Atlanta Braves,
throws a slider across the plate about waist high, 3 feet above the ground. Derek
Jeter hits the ball with an initial velocity of 155 feet per second at an angle of 22°
above the horizontal. The ball travels straight at the 420 foot mark on the center
field wall which is 15 feet high.
a. Write parametric equations that describe the path of the ball.
b. Find the height of the ball after it has traveled 420 feet horizontally. Will
the ball clear the fence for a home run, or will the center fielder be able to
catch it?
c. If there were no outfield seats, how far would the ball travel before it hits the
ground?
Mixed
Review
25. Write an equation of the line with parametric equations x 11 t and
y 8 6t in slope-intercept form. (Lesson 8-6)
26. Food Industry
Fishmongers will often place ice over freshly-caught fish that
are to be shipped to preserve the freshness. Suppose a block of ice with a mass
of 300 kilograms is held on an ice slide by a rope parallel to the slide. The slide
is inclined at an angle of 22°. (Lesson 8-5)
a. What is the pull on the rope?
b. What is the force on the slide?
27. If b 17.4 and c 21.9, find the
B
measure of angle A to the nearest
degree. (Lesson 5-5)
28. Solve the system of equations.
(Lesson 2-2)
c
A
a
b
C
2x y z 2
x 3y 2z 3.25
4x 5y z 2.5
29. SAT/ACT Practice
What is the area of the shaded region?
A 19
B 16
C 9
D 4
3
5
E 2
Extra Practice See p. A41.
Lesson 8-7 Modeling Motion Using Parametric Equations
533
of
ANGLE
MEASURE
MATHEMATICS
You know that the direction of a vector is
the directed angle, usually measured in
degrees, between the positive x-axis
and the vector. How did that system
originate? How did other angle
measurement systems develop?
Other measurement units for angles have
been developed to meet a specific need. These
include mils, decimally- or centesimallydivided degrees, and millicycles.
Today mechanical engineers,
like Mark Korich, use angle
measure in designing electric
Early Evidence The division
and hybrid vehicles. Mr.
of a circle into 360° is based
Korich, a senior staff engineer
upon a unit of distance used
for
an auto manufacturer,
by the Babylonians, which
calculates
the draft angle that
was equal to about 7 miles.
allows
molded
parts to pull
They related time and miles by
away
from
the
mold
more easily.
observing the time that it took
He
also
uses
vectors
to
calculate
for a person to travel one of their
Ptolemy
the
magnitude
and
direction
of forces
units of distance. An entire day was 12
acting
upon
the
vehicle
under
normal
“time-miles,” so one complete revolution of
conditions.
the sky by the sun was divided into 12 units.
They also divided each time-mile into 30 units.
So 12 30 or 360 units represented a complete
revolution of the sun. Other historians feel
ACTIVITIES
that the Babylonians used 360° in a circle
because they had a base 60 number system,
1. Greek mathematician, Eratosthenes,
and thought that there were 360 days in a year.
calculated the circumference of Earth using
The Greeks adopted the 360° circle.
proportion and angle measure. By using
Ptolemy (85-165) used the degree system in
the angle of a shadow cast by a rod in
his work in astronomy, introducing symbols
Alexandria, he determined that AOB was
for degrees, minutes and seconds in his
equal to 7°12
. He knew that the distance
mathematical work, Almagest, though they
from Alexandria to Syene was 5000 stadia
differed from our modern symbols. When his
(singular stadium). One stadium equals
work was translated into Arabic, sixtieths
500 feet. Use the diagram to find the
were called “first small parts,” sixtieths of
circumference of Earth. Compare your
sixtieths were called “second small parts,” and
result to the actual circumference of Earth.
so on. The later Latin translations were
2. Research one
Alexandria
“partes minutae primae,” now our “minutes,”
A
Syene
of the famous
and “partes minutae secundae,” now our
B
construction
“seconds.”
problems of
The Renaissance The degree symbol (°)
the Greeks—
O
became more widely used after the
trisecting an
publication of a book by Dutch
angle using a
mathematician, Gemma Frisius in 1569.
straightedge
and compass. Try to
Modern Era Radian angle measure was
locate a solution to this problem.
introduced by James Thomson in 1873. The
radian was developed to simplify formulas
used in trigonometry and calculus. Radian
measure can be given as an exact quantity not
just an approximation.
534
Chapter 8 Vectors and Parametric Equations
3.
Find out more about those
who contributed to the history of angle
•
measure. Visit www.amc.glencoe.com
Look Back
Refer to Lesson 2-3
to review ordered
pairs and matrices.
Chris Wedge of
Blue Sky Studios, Inc. used software to create
p li c a ti
the film that won the 1999 Academy Award
for Animated Short Film. The computer software allows
Mr. Wedge to draw three-dimensional objects and manipulate
or transform them to create motion, color, and light direction.
The mathematical processes used by the computer are very
complex. A problem related to animation will be solved in
Example 2.
COMPUTER ANIMATION
on
Ap
• Transform threedimensional
figures using
matrix
operations to
describe the
transformation.
l Wor
ea
ld
OBJECTIVE
Transformation Matrices in
Three-Dimensional Space
R
8-8
Basic movements in three-dimensional space can be described using vectors
and transformation matrices. Recall that a point at (x, y) in a two-dimensional
x
coordinate system can be represented by the matrix
. This idea can be
y
extended to three-dimensional space. A point at (x, y, z) can be expressed as the
x
matrix y .
z
Example
You could
also find the
coordinates of
B, G, and H first,
then add 3 to the
z-coordinates of
A, B, and G to find
the coordinates
of D, C, and F.
1 Find the coordinates of the vertices of the rectangular
prism and represent them as a vertex matrix.
3 2, 2 2, 1 (2) or 5, 4, 3
AE
z
E (–3, –2, 1)
to find the
You can use the coordinates of AE
coordinates of the other vertices.
B(2, 2 (4), 2) B(2, 2, 2)
C(2, 2 (4), 2 3) C(2, 2, 1)
D(2, 2, 2 3) D(2, 2, 1)
F(2 (5), 2, 2 3) F(3, 2, 1)
G(2 (5), 2, 2) G(3, 2, 2)
H(2 (5), 2 (4), 2) H(3, 2, 2)
A
B
C
x 2
2
2
The vertex matrix for the prism is y 2 2 2
z 2 2
1
C
H
D
x
B
F
G
y
A(2, 2, –2)
D
E
F
G
H
2 3 3 3 3
2 2
2
2 2 .
1
1
1 2 2
In Lesson 2-4, you learned that certain matrices could transform a polygon on
a coordinate plane. Likewise, transformations of three-dimensional figures, called
polyhedra, can also be represented by certain matrices. A polyhedron (singular
of polyhedra) is a closed three-dimensional figure made up of flat polygonal regions.
Lesson 8-8
Transformation Matrices in Three-Dimensional Space
535
2 COMPUTER ANIMATION Maria is working on a computer animation project.
l Wor
ea
Ap
on
ld
R
Example
p li c a ti
She needs to translate a prism using the vector a 3, 3, 0.
The vertices of the prism have the following coordinates.
A(2, 1, 4)
B(1, 1, 4)
C(2, 3, 4)
D(2, 3, 3)
E(2, 1, 3)
F(1, 1, 3)
z
D
F
E
a. Write a matrix that will have such an effect on
the figure.
y
x
b. Find the coordinates of the vertices of the
translated image.
B
A
c. Graph the translated image.
a. To translate the prism by the vector a 3, 3, 0, we must first add 3 to
each of the x- and y-coordinates. The z-coordinates remain the same. The
translation matrix can be written as
3 3 3 3 3 3
3 3 3 3 3 3 .
0 0 0 0 0 0
b. Write the vertices of the prism in a 6 3 matrix. Then add it to the
translation matrix to find the vertices of the translated image.
A
B
C D
3 3 3 3 3 3
2 1 2 2
3 3 3 3 3 3 1 1
3
3
0 0 0 0 0 0
4 4 4
3
A
B
C
D
5
2
1
1
4
2
6
6
4 4 4
3
E
5
4
3
F
2
2
3
y
B
A
Vectors and Parametric Equations
D
E
x
Chapter 8
z
F
c. Draw the graph of the image.
536
E
F
2 1
1 1
3
3
C
C
Recall that certain 2 2 matrices could be used to reflect a plane
figure across an axis. Likewise, certain 3 3 matrices can be used to reflect
three-dimensional figures in space.
Example
3 Let M represent the vertex matrix of the rectangular prism in Example 1.
0
1 0
a. Find TM if T 0 1
0 .
0 0 1
b. Graph the resulting image.
c. Describe the transformation represented by matrix T.
a. First find TM.
1 0
0
TM 0 1
0 0 0 1
2
2
2 2 3 3 3 3
2 2 2 2 2
2
2 2
2 2
1 1
1
1 2 2
A
B C D
E F G H 2
2
2
2 3 3 3 3
TM 2 2 2
2 2
2
2 2
2
2 1 1 1 1
2
2
b. Then graph the points represented by the resulting matrix.
H
B
z
G
E A
C
F
y
D
x
1 0
0
c. The transformation matrix 0 1
0 reflects the image of each vertex
0 0 1
over the xy-plane. This results in a reflection of the prism when the new
vertices are connected by segments.
The transformation matrix in Example 3 resulted in a reflection over the
xy-plane. Similar transformations will result in reflections over the xz- and
yz-planes. These transformations are summarized in the chart on the next page.
Lesson 8-8
Transformation Matrices in Three-Dimensional Space
537
Reflection Matrices
Multiply the
vertex matrix by:
For a reflection
over the:
Ryz-plane yz-plane
1 0
0 1
0 0
1
Rxz-plane 0
0
xz-plane
0
1
0
0
0
1
0
0
1
Resulting image
z E G
A
G
E
D
C
O
B y
D C
F
x
z
F A
G
E G
B
B
O
A
C
D
x
y
C
z
1
Rxy-plane 0
0
xy-plane
0
1
0
0
0
1
A
F
E
B
O
D
x
G
F
E
C
y
A
G
One other transformation of two-dimensional figures that you have studied is
the dilation. A dilation with scale factor k, for k 0, can be represented by the
k 0 0
matrix D 0 k 0 .
0 0 k
Example
z
4 A parallelepiped is a prism whose faces are all
parallelograms as shown in the graph.
G(3,1,5) H (3,5,5)
a. Find the vertex matrix for the transformation
D where k 2.
B (0,1,5)
b. Draw a graph of the resulting figure.
E (2,0,0)
c. What effect does transformation D have on
the original figure?
x
C (0,5,5)
F (2,4,0)
A(1,0,0) D (1,4,0)
2 0 0
a. If k 2, D 0 2 0 .
0 0 2
Find the coordinates of the vertices of the parallelepiped. Write them as
vertex matrix P.
A B C D
E
F
G
H
1 0 0 1 2 2 3 3
P 0 1 5 4
0
4
1
5
0 5 5 0
0
0
5
5
538
Chapter 8
Vectors and Parametric Equations
y
Then, find the product of D and P.
2 0 0
1 0 0 1 2 2 3 3
DP 0 2 0 0 1 5 4
0
4
1
5
0 0 2
0 5 5 0
0
0
5
5
A
2
0
0
B
0
2
10
D
2
8
0
C
0
10
10
E
4
0
0
F
4
8
0
H
6
10
10
G
6
2
10
z
b. Graph the transformation.
G
c. The transformation matrix D
is a dilation. The dimensions
of the prism have increased
by a factor of 2.
H
C
B
E
x
C HECK
Communicating
Mathematics
FOR
F
y
D
A
U N D E R S TA N D I N G
Read and study the lesson to answer each question.
1. Describe the transformation that matrix T three-dimensional figure.
2 0 0
0 2 0 produces on a
0 0 2
z
2. Write a transformation matrix that represents
the translation shown at the right.
B
F
x
F
E
B
A
A
D
C(6, 7, 3)
y
C (8, 8, 2)
D
E
3. Determine if multiplying a vertex matrix by the transformation matrix
T
1 0
0
0 1
0 produces the same result as multiplying by
0 0 1
1 0
1 0
0
0 1
0 and then by V U 0 1
0 0
0 0 1
0
0 .
1
Lesson 8-8 Transformation Matrices in Three-Dimensional Space
539
4. Math
Journal Using a chart, describe the effects reflection, translation, and
dilation have on
a. the figure’s orientation on the coordinate system.
b. the figure’s size.
c. the figure’s shape.
z
5. Refer to the rectangular prism at the right.
Guided
Practice
E(0, 2, 4) H
a. Write the matrix for the figure.
b. Write the resulting matrix if you
F
translate the figure using the vector
4, 1, 2.
C
y
x
c. Transform the figure using the matrix
G
D
A
1
0 0
0 1 0 . Graph the image and
0 1
0
describe the result.
B(5, 5, 0)
d. Describe the transformation on the figure resulting from its product with
the matrix
0
0.5
0
0.5
0
0
0
0 .
0.5
6. Architecture
Trevor is revising a design for a playground that contains a piece
of equipment shaped like a rectangular prism. He needs to enlarge the prism
4 times its size and move it along the x-axis 2 units.
a. What are the transformation matrices?
b. Graph the rectangular prism and its image after the transformation.
E XERCISES
Practice
Write the matrix for each prism.
A
7.
A
x
C
B
z A(–3, –2, 2)
B
F (3, 7, 4)
E(2, 3, 2)
y
D(4, 7, –1)
D
F
x
G
C
y
9.
z
B (1, 0, 4)
A(2, –2, 3)
E
11. b 1, 2, 2
Chapter 8 Vectors and Parametric Equations
y
C (4, –1, 2)
D
x F(6, 0, 0)
E
H(4, 1, –2)
z
Use the prism at the right for Exercises 10-15. The
vertices are A(0, 0, 1), B(0, 3, 2), C(0, 5, 5),
D(0, 0, 4), E(2, 0, 1), F(2, 0, 4), G(2, 3, 5), and
H(2, 3, 2). Translate the prism using the given vectors.
Graph each image and describe the result.
10. a 0, 2, 4
540
8.
z
B (3, 1, 4)
D
F
E
x
A
C
G
B
H
y
12. c 1, 5, 3
www.amc.glencoe.com/self_check_quiz
Refer to the figure for Exercises 10-12. Transform the figure using each matrix.
Graph each image and describe the result.
1 0 0
1 0
0 0 1
13. 0
0
0
0
1
0 1
0
1
14. 0
15.
0
1
0
0
0 1
0 1
0
Describe the result of the product of a vertex matrix and each matrix.
C
2 0 0
2 0
0 0 2
16. 0
0
3 0
0
3
0 0 3
17. 0
18.
0
0.75
0
0
0 0.75
0 0.75
0
19. A transformation in three-dimensional space can also be represented by
T (x, y, z) → (2x, 2y, 5z).
a. Determine the transformation matrix.
b. Describe the transformation that such a matrix will have on a figure.
l Wor
ea
Ap
on
ld
R
Applications
and Problem
Solving
p li c a ti
20. Marine Biology
A researcher studying a
group of dolphins uses the matrix
20 136 247 302 351
58 71 74 83 62 ,
52
37
59
53
27
with the ship at the origin, to track the dolphins’
movement. Later, the researcher will translate
the matrix to a fixed reference point using the
vector 23.6, 72, 0.
a. Write the translation matrix used for the
transformation.
b. What is the resulting matrix?
c. Describe the result of the translation.
21. Critical Thinking
Write a transformational matrix that would first reflect a
rectangular prism over the yz-plane and then reduce its
dimensions by half.
22. Meteorology
At the National Weather Service Center in Miami, Florida,
meteorologists test models to forecast weather phenomena such as hurricanes
and tornadoes. One weather disturbance, wind shear, can be modeled using a
transformation on a cube. (Hint: You can use any size cube for the model.)
a. Write a matrix to transform a cube into a slanted parallelepiped.
b. Graph a cube and its image after the transformation.
23. Geometry
Suppose a cube is transformed by two matrices,
1
0
0
1 0 2
first by U 0 1
0 , and then by T 0 2 0 .
0
0 1
0 0 2
Describe the resulting image.
Lesson 8-8 Transformation Matrices in Three-Dimensional Space
541
24. Critical Thinking
Matrix T maps a point P(x, y, z) to the point
P
(3x, 2y, x 4z). Write a 3 3 matrix for T.
25. Seismology
Seismologists classify movements in the earth’s crust by
determining the direction and amount of movement which has taken place
on a fault. Some of the classifications are shown using block diagrams.
dip-slip
strike-slip
oblique slip
reverse fault
a. A seismologist used the matrix below to describe a particular feature along a
fault.
123.9
86.4
206.5
41.3 201.7
144.2 29.9
247.8 262.7
36.4
73.8 129.4
95.5 125.5
84.2
84.1
213.2 165.2
After a series of earthquakes he determined the matrix describing the feature
had changed to the following matrix.
123.9 41.3 201.7
88.0 145.8 28.3
205.3 246.6 261.5
36.4
73.8 129.4
97.1 123.9
82.6
85.3
212.0 166.4
What classification of movement bests describes the transformation that has
occurred?
b. Determine the matrix that describes the movement that occurred.
Mixed
Review
26. Physics
Jaimie and LaShawna are standing at the edge of a cliff that is 150 feet
high. At the same time, LaShawna drops a stone and Jaimie throws a stone
horizontally at a velocity of 35 ft/s. (Lesson 8-7)
a. About how far apart will the stones be when they land?
b. Will the stones land at the same time? Explain.
27. Write an equation in slope-intercept form of the line with parametric
equations x 5t 1 and y 2t 10. (Lesson 8-6)
2
28. Evaluate sec cos1 if the angle is in Quadrant I. (Lesson 6-8)
5
29. Medicine
Maria was told to take 80 milligrams of medication each morning for
three days. The amount of medicine in her body on the fourth day is modeled
by M(x) 80x3 80x2 80x, where x represents the absorption rate per day.
Suppose Maria has 24.2 milligrams of the medication present in her body on the
fourth day. Find the absorption rate of the medication. (Lesson 4-5)
30. SAT/ACT Practice
542
Which of the following equations are equivalent?
III. 2x 4y 8
II. 3x 6y 12
III. 4x 8y 8
IV. 6x 12y 16
A I and II only
B I and IV only
D III and IV only
E I, II, and III
Chapter 8 Vectors and Parametric Equations
C II and IV only
Extra Practice See p. A41.
CHAPTER
8
STUDY GUIDE AND ASSESSMENT
VOCABULARY
component (p. 488)
cross product (p. 507)
direction (p. 485)
direction vector (p. 520)
dot product (p. 506)
equal vectors (p. 485)
inner product (p. 505)
magnitude (p. 485)
opposite vectors (p. 487)
parallel vectors (p. 488)
parameter (p. 520)
parametric equation (p. 520)
polyhedron (p. 535)
resultant (p. 486)
scalar (p. 488)
scalar quantity (p. 488)
standard position (p. 485)
unit vector (p. 495)
vector (p. 485)
vector equation (p. 520)
zero vector (p. 485)
UNDERSTANDING AND USING THE VOCABULARY
Choose the correct term from the list to complete each sentence.
?
1. The
of two or more vectors is the sum of the vectors.
?
2. A(n)
vector has a magnitude of one unit.
3. Two vectors are equal if and only if they have the same direction
and
?
4. The
?
.
product of two vectors is a vector.
?
5. Two vectors in space are perpendicular if and only if their
product is zero.
?
6. Velocity can be represented mathematically by a(n)
.
?
7. Vectors with the same direction and different magnitudes are
8. A vector with its initial point at the origin is in
9. A
?
?
.
components
cross
direction
equal
inner
magnitude
parallel
parameter
resultant
scalar
standard
unit
vector
position.
vector is used to describe the slope of a line.
10. Two or more vectors whose sum is a given vector are called
?
of the given vector.
For additional review and practice for each lesson, visit: www.amc.glencoe.com
Chapter 8 Study Guide and Assessment
543
CHAPTER 8 • STUDY GUIDE AND ASSESSMENT
SKILLS AND CONCEPTS
OBJECTIVES AND EXAMPLES
REVIEW EXERCISES
Lesson 8-1
Use a ruler and a protractor to determine the
magnitude (in centimeters) and direction of
each vector.
Add and subtract vectors
geometrically.
Find the sum of a and b
using the parallelogram
method.
a
11.
p
12.
q
b
Place the initial points of
b together. Draw
a and dashed lines to form a
complete parallelogram.
a b
The diagonal from the
a
initial points to the
opposite vertex of the
parallelogram is the resultant.
Use p and q above to find the magnitude and
direction of each resultant.
b
Lesson 8-2
Find ordered pairs that represent
vectors, and sums and products of vectors.
13. p q
14. 2p
q
15. 3p
q
16. 4p
q
Find the magnitude of the horizontal and
vertical components of each vector shown for
Exercises 11 and 12.
17. p
18. q
Write the ordered pair that represents CD .
Then find the magnitude of CD .
Write the ordered pair that represents the
vector from M(3, 1) to N(7, 4). Then find
the magnitude of MN .
MN 7 3, 4 1 or 10, 3
 MN
(7 3)2 (4 1)2 or 109
19. C(2, 3), D(7, 15)
Find a b if a 1, 5 and b 2, 4.
a b 1, 5 2, 4
1 (2), 5 4 or 1, 1
23. u v w
20. C(2, 8), D(4, 12)
21. C(2, 3), D(0, 9)
22. C(6, 4), D(5, 4)
Find an ordered pair to represent u in each
w 3, 1.
equation if v 2, 5 and 24. u v w
25. u 3v
2
w
26. u 3v
2
w
Lesson 8-3
Find the magnitude of vectors in
three-dimensional space.
Write the ordered triple that represents the
vector from R(2, 0, 8) to S(5, 4, 1).
Then find the magnitude of RS .
RS 5 (2), 4 0, 1 8
7, 4, 9
2 (
RS  (5 (
2))2
(
4 0)
1 8)2
49 1
6 81 or about 12.1
544
Chapter 8 Vectors and Parametric Equations
Write the ordered triple that represents EF .
Then find the magnitude of EF .
27. E(2, 1, 4), F(6, 2, 1)
28. E(9, 8, 5), F(1, 5, 11)
29. E(4, 3, 0), F(2, 1, 7)
30. E(3, 7, 8), F(4, 0, 5)
Find an ordered triple to represent u in each
w 4, 1, 5.
equation if v 1, 7, 4 and 31. u 2w
5v
32. u 0.25 v 0.4w
CHAPTER 8 • STUDY GUIDE AND ASSESSMENT
OBJECTIVES AND EXAMPLES
Lesson 8-4
REVIEW EXERCISES
Find the inner and cross products
of vectors.
Find the inner product of a and b if
a 3, 1, 7 and b 0, 2, 4. Are a
and b perpendicular?
a b 3(0) (1)(2) 7(4) or 26
Find each inner product and state whether the
vectors are perpendicular. Write yes or no.
33. 5, 1 2, 6
34. 2, 6 3, 4
35. 4, 1, 2 3, 4, 4
36. 2, 1, 4 6, 2, 1
a and b are not perpendicular since their
inner product is not zero.
d if
Find c c 2, 1, 1 and d 1, 3, 0.
i j k
c d 2 1 1
1 3 0
37. 5, 2, 10 2, 4, 4
31 10 i 21 10 j  21 31 k
39. 2, 3, 1 2, 3, 4


41. 7, 2, 1 2, 5, 3
Lesson 8-5 Solve problems using vectors and
right triangle trigonometry.
200
280
tan 200
tan1 280
35.6°
38. 5, 2, 5 1, 0, 3
40. 1, 0, 4 5, 2, 1
or 3, 1, 5
3i 1j 5k
Determine if a is perpendicular to b and
a 3, 1, 5, b 2, 1, 1, and
c if c 1, 3, 0.
b 3(2) 1(1) 5(1) or 0
a a c 3(1) 1(3) 5(0) or 0
Since the inner products are zero, a
is perpendicular to both b and c.
Find the magnitude
and direction of the
resultant vector for
the diagram.
r
2 2002 2802
r
2 118,400
r
 118,40
0
344 N
Find each cross product. Then verify if the
resulting vector is perpendicular to the given
vectors.
42. Find a vector perpendicular to the plane
containing the points (1, 2, 3), (4, 2, 1),
and (5, 3, 0).
Find the magnitude and direction of the
resultant vector for each diagram.
43.
200 N
260 N
280 N
320 N
44.
r
200 N
200 N
30 m/s
280 N
26˚
12 m/s
Chapter 8 Study Guide and Assessment
545
CHAPTER 8 • STUDY GUIDE AND ASSESSMENT
OBJECTIVES AND EXAMPLES
Lesson 8-6
Write vector and parametric
equations of lines.
Write a vector equation of the line that
passes through P(6, 3) and is parallel to
v 1, 4. Then write parametric equations
of the line.
The vector equation is x 6, y 3 t 1, 4.
Write the parametric equations of a line
with (a1, a2) (6, 3) and (x1, y2) (1, 4).
y y1 ta2
x x1 ta1
x 6 t(1)
y 3 t(4)
x 6 t
y 3 4t
Lesson 8-7
Model the motion of a projectile
using parametric equations.
Find the initial horizontal and vertical
velocity for an arrow released at 52 m/s
at an angle of 12° with the horizontal.
v
xv
cos v
yv
sin v
x 52 cos 12°
v
y 52 sin 12°
v
x 50.86
v
y 10.81
The initial horizontal velocity is about
50.86 m/s and the initial vertical velocity is
about 10.81 m/s.
Lesson 8-8
Transform three-dimensional
figures using matrix operations to describe the
transformation.
A prism needs to be translated using the
vector 0, 1, 2. Write a matrix that will have
such an effect on a figure.
0 0 0 0 0 0 0 0
T 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2
REVIEW EXERCISES
Write a vector equation of the line that passes
through point P and is parallel to v . Then write
parametric equations of the line.
45. P(3, 5), v 4, 2
46. P(1, 9), v 7, 5
47. P(4, 0), v 3, 6
Write parametric equations of each line with
the given equation.
48. y 8x 7
1
2
5
2
49. y x Find the initial horizontal and vertical velocity
for each situation.
50. a stone thrown with an initial velocity of 15
feet per second at an angle of 55° with the
horizontal
51. a baseball thrown with an initial velocity of
13.2 feet per second at an angle of 66° with
the horizontal
52. a soccer ball kicked with an initial velocity
of 18 meters per second at an angle of 28°
with the horizontal
z
Use the prism for
Exercises 53 and 54.
H(–4, –2, 2) E
53. Translate the figure
using the vector
n 2, 0, 3.
Graph the image
and describe
the result.
A
G
D
y
B
x
C(3, 4, –1)
54. Transform the figure using the matrix
1 0 0
M 0 1 0 . Graph the image and
0 0 1
describe the result.
546
Chapter 8 Vectors and Parametric Equations
F
CHAPTER 8 • STUDY GUIDE AND ASSESSMENT
APPLICATIONS AND PROBLEM SOLVING
55. Physics
Karen uses a large wrench to
change the tire on her car. She applies a
downward force of 50 pounds at an angle of
60° one foot from the center of the lug nut.
Find the torque. (Lesson 8-4)
57. Navigation
A boat that travels at 16 km/h
in calm water is sailing across a current of
3 km/h on a river 250 meters wide. The boat
makes an angle of 35° with the current
heading into the current. (Lesson 8-5)
a. Find the resultant velocity of the boat.
b. How far upstream is the boat when it
reaches the other shore?
58. Physics Mario and Maria are moving a
stove. They are applying forces of 70 N and
90 N at an angle of 30° to each other. If the
90 N force is applied along the x-axis find the
magnitude and direction of the resultant of
these forces. (Lesson 8-5)
56. Sports
Bryan punts a football with an
initial velocity of 38 feet per second at an
angle of 40° from the horizontal. If the ball is
2 feet above the ground when it is kicked,
how high is it after 0.5 second? (Lesson 8-7)
ALTERNATIVE ASSESSMENT
Show that your coordinates are correct.
b. Find the magnitude of XY . Did you need
to know the coordinates for X and Y to
find this magnitude? Explain.
2. a. PQ and RS are parallel. Give ordered
pairs for P, Q, R, and S for which this is
true. Explain how you know PQ and RS
are parallel.
b. a and b are perpendicular. Give ordered
pairs to represent a and b . Explain how
you know that a and b are perpendicular.
PORTFOLIO
Devise a real-world problem that can be
solved using vectors. Explain why vectors are
needed to solve your problem. Solve your
problem. Be sure to show and explain all of
your work.
LD
E
Project
EB
Unit 2
D
a. Give possible coordinates for X and Y.
W
WI
OPEN-ENDED ASSESSMENT
1. The ordered pair 3, 2 represents XY .
W
THE CYBERCLASSROOM
Vivid Vectors!
• Search the Internet to find websites that have
lessons about vectors and their applications.
Find at least three different sources of
information.
• Make diagrams of examples that use vectors
to solve problems by combining the ideas you
found in Internet lessons and your textbook.
• Prepare a presentation to summarize the
Internet Project for Unit 2. Design the
presentation as a webpage. Use appropriate
software to create the webpage.
Additional Assessment
practice test.
See p. A63 for Chapter 8
Chapter 8 Study Guide and Assessment
547
CHAPTER
SAT & ACT Preparation
8
Geometry Problems—
Perimeter, Area, and Volume
Many SAT and ACT problems
use perimeter, circumference,
and area. A few problems use
volume. Even though the
formulas are often given on
the test, it is more efficient if
you memorize them.
TEST-TAKING TIP
r
Recall that the value of is
about 3.14. When you need
to estimate a quantity that
involves , use 3 as a rough
approximation.
h
w
b
A r 2
C 2r
A w
A 12 bh
SAT EXAMPLE
ACT EXAMPLE
1. In the figure below, the radius of circle A is
twice the radius of the circle B and four times
the radius of C. If the sum of the areas of the
circles is 84, what is the measure of AC
?
2. In the figure below, if AB 27, CD 20, and
the area of ADC 240, what is the area of
polygon ABCD in square units?
B
C
27
A
B
20
C
A
A 420
HINT
Use a variable when necessary. Choose it
carefully.
Solution
This is a grid-in problem. You must
find the length of AC
. This segment contains the
radii of the circles. Let r be the radius of circle C.
Then the radius of circle B is 2r, and the radius
of circle A is 4r.
You know the total area. Write an equation for
the sum of the three areas.
Area A Area B Area C 84
(4r)2 (2r)2 (r)2 84
16r 2 4r 2 r 2 84
21r 2 84
r2 4
r2
The radius of C is 2; the radius of B is 4; the
radius of A is 8. Recall that the problem asked
for the length of AC
. Use the diagram to see
which lengths to add—one radius of A, two radii
of B, and one radius of C.
AC 8 4 4 2 or 18
The answer is 18.
548
Chapter 8
Vectors and Parametric Equations
HINT
B 480
D
C 540
D 564
E 1128
You may write in the test booklets. Mark all
information you discover on the figure.
Solution
The polygon is made up of two
triangles, so find the area of each triangle. You
know that the area of ADC is 240 and its height
is 20.
1
2
1
240 (b)(20)
2
A bh
240 10b
24 b
So, AD 24.
Now find the area of ABC. The height of this
triangle can be measured along AD
. So, h 24,
and the height is the measure of A
B
, or 27. The
1
2
area of ABC (27)(24) or 324. You need to
add the areas of the two triangles.
240 324 564
The answer is choice D.
SAT AND ACT PRACTICE
After you work each problem, record your
answer on the answer sheet provided or on a
piece of paper.
6. The figure below is made of three concentric
semi-circles. What is the area of the shaded
region in square units?
Multiple Choice
1. In parallelogram ABCD below, BD 3 and
CD 5. What is the area of ABCD?
A
B
1 2 3 4
3
A 3
D
9
B 2
C 6
D 7
E 9
C
5
A 12
B 15
C 18
D 20
E It cannot be determined from the
information given.
1
2
3
7. 5
25
50
A 0.170
B 0.240
D 0.340
E 0.463
C 0.320
2. In square ABCD below, what is the equation
of circle Q that is circumscribed around the
square?
y B (2, 2)
C
O
D
x
A (2, 2)
A (x 4)2 y2 4
C (x 4)2 y2 8
E (x 4)2 y2 32
B (x 4)2 y2 8
D (x 4)2 y2 32
of y in terms of p?
y
B
x
x
D
p
A 10
p
C 3
2p
D 5
3p
E 5
4. If two sides of a triangle have lengths of 40
and 80, which of the following cannot be the
length of the third side?
A 40
5.
B 41
C 50
D 80
1
2
2
3
A x
9
2
9
B x
1
3
C x
D x
C 140
D 142
E 144
9. Which of the following is the closest
approximation of the area of a circle with
radius x?
A
B
C
D
E
4x2
3x2
2x2
x2
0.75x2
In the figure, if
AE 1, what is
the sum of the
area of ABC
and the area of
CDE?
B
C
A
x˚
1
E
x˚
D
E 81
x2 x3 3
B 136
10. Grid-In
C
y
3p
B 10
to be completely covered with 1-inch square
tiles, which cannot overlap one another and
cannot overhang. If white tiles are to cover
the interior and red tiles are to form a 1-inch
wide border along the edge of the surface,
how many red tiles will be needed?
A 70
3. If the perimeter of the rectangle ABCD is
2
equal to p, and x y, what is the value
3
A
8. A 30-inch by 40-inch rectangular surface is
E x
SAT/ACT Practice For additional test
practice questions, visit: www.amc.glencoe.com
SAT & ACT Preparation
549