Download Surface Resistance Test Kit

Surface Resistance Test Kit
model
292A
Features:
• Liquid Crystal Display (LCD): A 3.5 digit 9/16”
•
•
•
Description:
•
•
•
•
•
•
•
Monroe Model 292A Digital Surface Resistance
Test Kit is a portable, versatile, instrument designed to accurately measure resistance between
two points (Rtt), surface to ground (Rtg), and
surface resistivity in accordance with ANSI/ESD
Association standard S-4.1. In addition, the
meter measures ambient temperature and relative humidity.
The Surface Resistance Meter (included in
the kit) is designed to make measurements in
accor-dance with specified test methods on:
Work surfaces – ANSI/ESD STM S4.1 Work
surfaces – Resistance Measurements
Floors – ANSI/ESD STM S7.1 – Resistive Characterization of Materials Floor Materials
Footwear – ANSI/ESD STM S9.1 – FootwearResistive Characterization
Garments – ANSI/ESD STM 2.1 Garments
Seating – ANSI/ESDESD STM 12.1 Seating –
Resistive Measurement
Floor/Footwear – ANSI/ESD STM 97.1 Floor
Materials and Footwear Resistance Measurement in Combination with a Person
Workstations – ANSI/ESD-AVD53.1 ESD Protective Workstations
•
high, liquid crystal display provides easy to read
measurements directly from the meter. No interpretations or calculations are required.
LED Displays: Surface resistance exponents
are displayed via 12 light emitting diodes (< 103
- >1012). LEDs are color coded for quick check
recognition: Five additional Function LEDs identify the measurement taken when lit.
Auto/10 Volt Hold Test Range Voltage Button:
When in the “up” or Auto position, during resistance portion of test, meter will automatically
switch to the correct voltage for the resistance
range. When in the “down” or 10 Volt Hold position automatic voltage selection is overridden
and the test is performed at 10 Volts regardless
of resistance level. An LED illuminates to note
selected voltage.
Test Push Button: Activates electrical power to
the meter. Quick Check Button: When set to FULL, the
meter will cycle through the 15 second electrification period that displays the temperature and
relative humidity before the surface resistance
mantissa is displayed. When set to QUICK, the
meter will skip the 15 seconds and immediately
display the surface resistance mantissa.
Ambient Temperature, Relative Humidity and
• Temperature in degress F (+/- 10%)
• Temperature in degrees C (+/- 10%)
• Relative Humidity as a percentage (+/- 10 integers)
• Surface Resistance Mantissa (with expo-
nent displayed via LED, measurement ex
pressed in ohms.)
Surface Resistivity:
Resistivity measurements require incorporating our optional resistivity adapter model 292/41.
The Surface Resistance Test Meter attaches easily too the resistivity adaptor. Parallel conductive
silicone rubber electrodes provide for measurement of surface resistivity.
The adapter is optional and must be specified separately when ordering, (292A/41 p/n
0930245.)
Surface Resistance Test Kit model 292A
Specifications:
Range:
1.0 x 103 to 1 x 1012 Ω @ 10V
1.0 x 106 to 1 x 1012 Ω @ 100V
Accuracy:
Resistance measurments within +/-10% (20% for resistance values 1x106 and Open Circuit
Voltages:
greater.)
10 and 100 volts ±3%
Kit includes:
• Meter
• Protective carrying case
• Test leads with gator clip
• Two NFPA-99 5-pound electrodes
• Two AA Alkaline batteries
• Operator’s Manual
*Resistivity adapter sled is optional and must be ordered
separately.
Maintenance:
Electrification
Period:
15 seconds
Temperature
Accuracy:
±5 degrees F and ±3 degrees C Typ.
Relative
Humidity:
Range from 5% - 95%; ±10% Typ.
Power:
Two - Alkaline AA batteries
Battery Life: approximately
1500 measurements.
Meter Jacks:
Left jack on meter accepts a 3.5 mm plug
Right jack on meter accepts a standard banana plug
Test Leads:
External
Electrodes:
Resistivity
Electrodes:
Black lead terminated with a 3.5 mm plug one end and a standard banana plug on the other
White lead terminated with a standard banana plus both ends
Meter Weight:
Dimensions:
.7 lbs / .03 kg
(20.6cm x 10.4cm x 3.8cm)
Two NFPA-99 5 pound electrodes (80 oz.)
±2oz with Shore A (IRHD) 50 - 70
durometer conductive pads that comply with EOS/ESD S4.1
Parallel conductive silicone rubber
electrodes 1.875 inches long and spaced 1.875 inches apart mounted onto a sepa
rate adapter.
8.1” L x 4.1” W x 1.5” H
The 292A Surface Resistance Kit requires little
maintenance. Containing no user serviceable parts, only
careful cleaning of the electrodes and replacement of the
batteries is required.
Calibration:
Monroe Electronics instruments are factory-calibrated
prior to shipment. Recalibration should be performed annually,
or more frequently if specified by contract or company policy.
Your instrument should also be recalibrated any time it has been
repaired or tampered with. We are happy to recalibrate your
instrument for you at a reasonable cost, or provide information
and procedures on calibration upon request.
Warranty:
Monroe Electronics, Inc., warrants that each
instrument and sub-assembly manufactured by them shall be
free from defects in material and workmanship for a period of
two years after shipment from the factory. This warranty is
applicable to the original purchaser only.
The finest ESD instrumentation and support:
For more than 40 years - ever since we invented the
feedback--nulled electrostatic voltmeter, Monroe has been
the technology and quality leader in electrostatic detection and measurement instrumentation. Today we offer the
world’s most complete array of fieldmeters, voltmeters and
resistivity meters. Our customers include the leading makers
of photocopiers and laser printers to converters and microelectronics worldwide.
We know you need quality support as well as quality
products. We pride ourselves on providing our customers
with the most knowledgeable applications and installation
support - as well as superior customer service.
How can we help?
Contact your Monroe Electronics representative for
price and delivery information on this and other ME products,
to schedule a no-obligation demonstration at your convenience. For the name of your nearest dealer, or for technical or applications assistance, contact Monroe Electronics
directly at the address and numbers below.
www.monroe-electronics.com
100 Housel Ave. | Lyndonville | NY | 14098
800-821-6001 | 585-765-2254 | fax 585-765-9330
Specifications subject to change without notice. | Printed in USA | Copyright© 2002 | Monroe Electronics Inc. | 292 ds 02042015 .indd