Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
BlackBerry configuration 1. APN configuration: ibox.tim.it 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 Establish a network connection via Wi-Fi connection; With the telephone trackpad select the antenna icon in the upper right of the display; From the menu “Activate all connections” select WI‐FI. If the flag is already present, go directly to the next point; Scroll through the menu and select Configure WIFI; The “Access hotspot”page will be displayed: select the Cancel button at the bottom of the page; The connection Configuration page will appear: select the Network Search button, then connect to the available network; Press the Menu key and select GO TO; In the “address” field of the hotspot Browser page complete the address http://www. with opera.com and confirm with the trackpad key; From the Opera page displayed, select the Download section; From the “Opera for Mobile Devices‐ Transfers” page displayed, select Download Opera Mini 6.5 for BlackBerry; Follow the directions provided by the system; When prompted to select the reliability level, answer NO; On termination of the download, select OK; Return to the telephone home screen maintaining the network connection active; Access the folder menu, press the Menu key; Open the download folder; Run the Opera mini installation by selecting the Opera icon O 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 (Fig. 1); Wait for installation of the browser to terminate; Complete the process by selecting the Accept key; Return to the telephone home screen by pressing the ESC key twice; Press the Menu key to enter configuration icon display; Figure 1 Select the Options icon and with the aid of the BlackBerry telephone manual supplied, select the item TCP/IP; Enter the flag under the item APN enabled; Enter in APN: ibox.tim.it; Press the Menu key and select Save; After configuration the terminal is ready to connect to the internet via the data SIM provided. To start a network connection from the data SIM: 1. Press the Menu key; 2. Open the Download folder; 3. Run Opera by selecting the icon Instructions O; Page 1 BlackBerry configuration 2. Configuration of mail client in IMAP mode 2.1 Establish a network connection via a free WIFI connection (e.g. domestic WIFI) and connect from your mobile terminal to: http://www.logicmail.org/ (fig. 2); Figure 2 2.2 Select the Over‐The‐Air Installation link; 2.3 Download from the Logic Mail 2.0.0.291 section the mail client version compatible with your BlackBerry OS (fig. 3 ); Figure 3 Instructions Page 2 BlackBerry configuration 2.4 When prompted to select the reliability level, answer NO; 2.5 The client will be saved in the download folder (folder with a yellow arrow - Fig. 4); Figure 4 2.6 2.7 2.8 Close the WIFI connection and enable connection via SIM; Access the download folder and run the mail client; The client activates in configuration mode. Otherwise, press the Menu key and select Configuration from the list; 2.8.1 In the New account setup screen enter: ‐ Identity: identifier of your choice ‐ Full name: identifier of your choice ‐ E‐mail address: assigned e-mail address Next> 2.8.2 In the Account type screen select: ‐ IMAP Next> 2.7.3 In the Account name screen enter: ‐ Account name: identifier of your choice Next> 2.8.4 In the Mail server screen enter: ‐ Server: address of mail server used: ‐ Use secure connection: SSL ‐ Port: 993 Next> 2.8.5 mail.ceda.polimi.it or mail.polimi.it or other In the Authentication screen enter: ‐ Username: same used to log in to the Webmail service ‐ Passsword: same used to log in to the Webmail service Next> 2.8.6 Next> 2.8.7 In the Outgoing mail server screen enter: ‐ Account: Create new (by default) ‐ Server: address of mail server used: ‐ Use secure connection: TLS ‐ Port: 587 mail.ceda.polimi.it or smtpauth.polimi.it or other In the Outgoing authentication screen enter: ‐ Authentication: login ‐ Username: same used to log in to the Webmail service ‐ Passsword: same used to log in to the Webmail service Next> 2.8.8 In the Connection setting screen: Verify that the flag is present in the “Use default setting” field and slect “Direct TCP” Next> 2.8.9 Run test configuration 2.8.10 Press Finish when the test has been successfully executed Instructions Page 3