Download (PDF 8mb)

Document related concepts

Post-glacial rebound wikipedia , lookup

Deep sea community wikipedia , lookup

Seismic anisotropy wikipedia , lookup

Geology wikipedia , lookup

Seismic inversion wikipedia , lookup

Geophysics wikipedia , lookup

Earthquake engineering wikipedia , lookup

Plate tectonics wikipedia , lookup

Earthquake wikipedia , lookup

Magnetotellurics wikipedia , lookup

Large igneous province wikipedia , lookup

Earthscope wikipedia , lookup

Transcript
Testing and improving crustal velocity models of Cook Inlet, Alaska, through ambient
noise correlations and seismic wavefield simulations
1
Matthew Haney1 , Carl Tape2 , Peter Haeussler3 , and John Power1
Alaska Volcano Observatory, U.S. Geological Survey, Anchorage, Alaska, USA
2
University of Alaska Fairbanks, Geophysical Institute and Department of Geology & Geophysics, Fairbanks, Alaska, USA
3
U.S. Geological Survey, Anchorage, Alaska, USA
The Cook Inlet is unusual compared to the rest of Alaska in that much is already known about the structure of the
Earth’s crust beneath it. This knowledge is the result of many years of oil and gas exploration in the Cook Inlet basin
as well as nearby networks of seismometers used for long-term earthquake and volcano monitoring (Fig. 1). The basin
is bounded to the east by the Border Ranges fault and reaches a maximum thickness of 7.8 km below the western edge
of the Kenai Peninsula [1]. Understanding the amplification effect of the basin on seismic waves carries importance for
the Cook Inlet given its earthquake activity and the fact that it is the location of over half the population of Alaska.
Within the field of seismology, it has recently been demonstrated that ambient noise recordings contain significant
amounts of structural information, in particular for basins. This realization has resulted in many applications using
correlations of ambient seismic noise recorded on pairs of seismometers [2–5]. For instance, the Hudson Bay [4] and
Puget Sound area [5] basins have recently been imaged using ambient noise techniques, with resolution extending to
sub-basin depths of 30-40 km. On a smaller scale, volcanic centers in Alaska have been imaged with ambient noise
[3]. The interaction of the oceans and the solid Earth provides the noise source. For this reason, Alaska is well-suited
for ambient noise techniques since storms in the Gulf of Alaska and the Bering Sea produce considerable levels of
microseismic noise.
Shown in Fig. 2 are ambient noise correlations between station pairs within the network at the Katmai cluster of
volcanoes, located south of the Cook Inlet on the Alaska Peninsula. The correlations in Fig. 2 clearly show a seismic
surface wave, the Rayleigh wave, propagating between the stations. The observed speed of the surface wave contains
information on the shear wave velocity in the crust. It turns out that this wave speed is frequency dependent - this is
why the correlations in Fig. 2 have been bandpass filtered at 0.3 Hz. Observations of the surface wave speed over a
wide frequency band leads to a 3D image of the crust, through the application of ambient noise tomography. In the
case of basin-scale ambient noise imaging [4, 5], the frequency band of interest lies between 0.03 and 0.25 Hz. For
volcanoes, Masterlark et al. [3] used frequencies between 0.2 and 0.7 Hz. Thus, the difference between basin-scale
62
Latitude (deg)
61.5
61
60.5
60
59.5
59
−154 −153 −152 −151 −150 −149
Longitude (deg)
FIG. 1: Permanent stations from the AVO, AEIC, GSN, and WCATWC networks in and around Cook Inlet. Broadband
stations are shown in yellow with short period instruments in red. A proposed Earthscope Flexarray deployment, consisting of
22 broadband stations and shown by magenta triangles, is intended to fill the gaps in the current coverage and facilitate the
use of ambient seismic noise to probe the basin structure.