Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Preparations CXO-Cockpit Installation (version 6) Version for Financial Management (HFM, Oracle EPM FM) This document describes the prerequisites and preparations for installing and configuring the CXO-Cockpit as a dashboard on Oracle Hyperion Financial Management. It does not describe the installation and configuration itself. The tables should be used as a check-list: either the indicated piece of information must be provided (enter it in the ‘Information’ column) or the specified action should be carried out / component should be installed (put a checkmark in the ‘Done’ column). CXO-Cockpit Application Server Provide the following information for the CXO-Cockpit application server. We also support virtual servers. Information need / Action Windows 2008 (R2)/ 2012 (R2). We recommend 2012 (If possible with HFM version) Amount of RAM (min. 8Gb, preferably 16Gb) Check Disk Space available (> 25Gb) Name (full DNS) IP Account to log on Domain (if applicable) Password1 SQL Server Management Studio installed (optional)2 Microsoft Components IIS 6 / IIS 7 / IIS 8 .Net framework 4.5.2 (CXO installer will install it if it is not there yet, so there is no need to pre-install it) Information Done Service Account For communication between the Web-application and the OLAP database and for running the CXO-Cockpit services, we need a service account. If Analysis Services (see below) is installed on the CXO-Cockpit application server, this service account can be a local machine account. Otherwise it should be a Domain account. The password of the account should never expire. Information need / Action Name Password Domain (if applicable) 1 Information Done If you cannot provide this, then make sure it is available during installation or ensure that someone can logon. During installation it might be convenient to do some checks in the SQL Server databases of the CXO-Cockpit application. To facilitate that we need access to SQL Server, either through an instance of the SQL Server Management Studio on the CXOCockpit application server or by getting the Windows log-on credentials for the Windows server where SQL Server is installed (see below). 2 SQL Server Data and meta-data of a CXO-Cockpit application are stored in SQL Server databases. A SQL Server should be available, or SQL Server should be installed on the CXO-Cockpit Application Server. Information need / Action Edition (Enterprise/ Standard / Express3) Version ( 2008 / 2012 / 2014) (SQL server 2012 or newer is recommended) Disk space for data and logs: >25Gb4 Name Windows Server (full DSN) IP Memory5 Instance name (or specific port)6 Native SQL Account7 (role = dbcreator8) Password Domain (or local) account to log-on to the server (optional: see2) Password Information Done Analysis Services The OLAP database in which we store the data extracted from HFM runs on SQL Server Analysis Services. As a rule, Analysis Services is installed on the same Windows Server as the SQL Server Database Engine, but this is not a requirement. Only provide information if it differs from the SQL Server specifications. Information need / Action Edition (Enterprise/ Standard) Version (2005 / 2008 / 2012) Name Windows Server (full DSN) IP Instance name (or specific port) Domain (or local) account to log-on to the server (optional: see2) Password 3 Information Done Express Edition can be used if Analysis Services runs on another server (Analysis Services requires Enterprise Edition or Standard Edition) 4 Depends on the data volume to be extracted from HFM and transformed in the database. In case of huge volumes (> 100 Million of records) we recommend 50Gb. 5 Recommended: >4Gb for Database Engine. If Analysis Services is on the same box, a total of 8Gb is recommended. 6 The instance name can be equal to the name of the Windows Server. In that case you can ignore this field. Provide information on a specific instance extension or port. E.g., the Windows Server could be named srvsql01.cxo.intra, while the instance is named srvsql01.cxo.intra\prod or srvsql01.cxo.intra;48000 7 A Native SQL Account is required because on the HFM application server we have to create a UDL that connects to one of the CXO-Cockpit databases. In this UDL we cannot apply Windows Authentication. 8 The ‘dbcreator’ role is only required at the moment of creation of a CXO-Cockpit application. Once created, the role can be degraded to ‘public’. Financial Management To connect to the HFM Application cluster, the FM Client and ADM Driver (and – depending on the FM version – the Application Server) must be installed on the CXO-Cockpit Application Server. Also, the cluster should be registered. We support all versions from HFM 4.0 and later. Information need / Action Version of (H)FM Client and ADM driver installed9 Cluster registered (provide name)10 Name FM Application Check if meta-data contains single quotes11 Native (non-domain) FM User Password Check if the user can read all data that need to be extracted (check role & security classes) Check if the user is allowed to start Extended Analytics Create .udl-file on HFM Application Server(s)12 Register DSN on HFM Application Server(s)13 9 Information Done This should be the same version as installed on the HFM Application Server(s). For the versions 11.1.1.3 and lower, also the Application Server must be installed because some of the libraries are required for running Extended Analytics. For 11.1.2.2 the Financial Management Server must also be installed. 10 For 11.1.2.2 there is no cluster-registration tool anymore. You must run the EPM Configurator and do the following steps: (1) connect the Shared Services database; (2) configure DCOM, using the same account that is used as a DCOM-account on the EPM server(s). As a result (and as a check if the correct steps were taken), the cluster will be visible when you start the Financial management Application Tool Box. 11 Single quotes in application meta-data, such as Entity descriptions, UDA’s etc. can be problematic for Extended Analytics (the built-in FM tool for extracting data and meta-data). It is unpredictable if and when these problems occur (a typical problem is that only part of the data is extracted). It is highly recommended to remove all single quotes and replace them by a more neutral symbol, like a -. 12 This action can only be done after creating the CXO-Cockpit application. The .udl file must connect to the cxo_hfmstaging_... database (or the cxo_hfmstaging2012_... database for FM 11.1.2.2), using the Native SQL Account. 13 For HFM System 9: use the Server and Web Configuration tool, for EPM 11.1.1.x use the EPM Configurator, for 11.1.2.1 use the Client Configuration tool, for 11.1.2.2 the Extended Analytics DSN Configuration tool.