* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Integrated Design Techniques Ltd www .idtuk.com Communications
Telecommunications in Russia wikipedia , lookup
Total Information Awareness wikipedia , lookup
Data center wikipedia , lookup
Packet switching wikipedia , lookup
Computer network wikipedia , lookup
Long-tail traffic wikipedia , lookup
Service delivery platform wikipedia , lookup
Windows Vista networking technologies wikipedia , lookup
Deep packet inspection wikipedia , lookup
Communication protocol wikipedia , lookup
Quality of service wikipedia , lookup
Airborne Networking wikipedia , lookup
Telecommunication wikipedia , lookup
Telecommunications engineering wikipedia , lookup
Internet protocol suite wikipedia , lookup
Recursive InterNetwork Architecture (RINA) wikipedia , lookup
Communications in UTMC systems Introduction Traffic management and control systems require pieces of equipment located at several geographically-dispersed locations. These pieces of equipment usually need to exchange data with other equipment at other locations – often these will include a central data management computer. In the UK, suppliers of traffic management and control systems traditionally used proprietary technical standards for communicating between these various system elements. Problems Arising As a result, the following arose: • It became impossible to exchange equipment supplied by one supplier with equipment from another • Local authority customers became ‘locked-in’ to one supplier – if they chose to procure a system from company X then they could not buy (or more importantly, use) functionally-identical equipment from company Y • As Suppliers therefore faced limited competition there was little incentive to start new development or to implement new technology. One consequence of this was that centrally-controlled Traffic Signal Controllers would only work with a specific communications circuit from BT. When BT announced the withdrawal of these circuits the traffic management industry panicked as it meant that traffic lights might stop working. UTMC to the rescue (?) The UTMC initiative was conceived to address this specific problem. It has, however, tackled it in rather a roundabout way. The core problem was defined in terms of two key issues: ‘interoperability’ (the ability for two pieces of equipment to exchange data) and ‘interchangeabilty’ (the ability to replace one piece of equipment with a functionally identical piece of equipment from another). Both of these issues were addressed by specifying open industry standards for both software interfaces and physical interfaces. As computer networks are designed to exchange data in much the same way as traffic management systems, the decision was made to use a computer network standard as the basis for data exchange in UTMC. TCP/IP is the dominant network standard at present. It contains a number of data exchange protocols which can be used for different tasks and applications. Layers It is important to understand how these protocols are related and how they relate to the communications medium being used. The key word here is ‘layers’. To exchange any information between two computers there must be an agreed set of commands and data formats, this is a protocol. So, for example, the commands and data sent between a World Wide Web browser and a remote server are a protocol Different systems may run the same computer programs but different means of interconnection. For example, suppose each of the two systems above run Microsoft Word on one computer to retrieve a file from the other computer. If in one system, the computers are linked by an optical fibre local area network and by a dial-up telephone line in the other then the means of interconnection are different. However, Microsoft Word has no knowledge of this interconnection and runs independent of any specific network connection. This is achieved by defining a clear interface between "layers" within the PC. At the top is the layer in which Microsoft Word resides (the Application Layer); lower down is the layer which decides that the dial-up or optical fibre link is to be used (the Physical Layer). The protocol explicitly defines the interface between the Application Layer and the layers below it so that Microsoft Word will run over any network. Each layer will pass information up and down to the next subsequent layer as data is processed. The main benefit of this is that it enables changes in technology to be made. For example, an organisation can change the network medium in its systems from copper to fibre to GPRS without having to change the email programs everyone uses. TCP/IP In UTMC systems (as well as most other computer networks) these layers are combined into a ‘stack’ or ‘suite’ known as TCP/IP (Transmission Control Protocol/Internet Protocol). TCP/IP consists of four layers (Application, Transport, Network and Physical). For a network at the core of a UTMC system to operate it needs to support TCP/IP. In addition, at the Application layer it needs to support CORBA (for instation to instation applications) and SNMP (for instation to outstation applications). Finally, within the CORBA and SNMP ‘sub-layers’, UTMC systems need to support the openly agreed Data Objects and MIBs which are contained in the Data Objects Registry. Thus, in a UTMC system the layers are: Layer Application Layer Transport Layer Network Layer Physical Layer Protocol used in UTMC UTMC Data Objects UTMC MIBs CORBA SNMP TCP IP Eg. LAN, ISDN. GPRS, Wi-Fi etc Data Objects The current version of the Data Objects Registry is Version 2. The registry contains all of the definitions necessary to establish an interface between the identified pieces of equipment (for example, car park counters, variable message signs, common databases) and between management applications at the instation.