Download ESD protection, TVS devices, and EMI filtering

ESD protection, TVS devices, and
EMI filtering
What you get when you choose NXP for ESD and surge protection
Solutions for wide application fields
 High-speed data lines
 Automotive protection
 General interfaces
 Supply lines
A broad range of packages that simplify PCB design
 Down to ultra-small
DSN0402 / 02005 inch
 DFN1608 for 1200 W
surge protection
 Multi-line ESD and
Benchmark
protection solutions
in packages
optimized for the
most common
communication
interfaces
Common Mode filter
A quality product from an experienced supplier
 NXP is strongly committed to automotive quality
standards
Rely on NXP, the #1 in ESD protection
Advanced silicon technology for worry-free ESD solutions
It takes a range of solutions to prevent the malfunctions caused by ESD pulses, surge pulses, and
noise emissions
ElectroStatic Discharge (ESD) is the transfer of an electric charge between bodies of different
electrostatic potential, as when a person gets very close to or touches a device or connecting
cable. The electric pulses are very short, with voltage values up to several kilovolts.
The discharge can do serious damage to unprotected electronic devices. NXP’s ESD
protection devices deliver best-in-class protection against these kinds of discharge
events, while ensuring high signal integrity.
Surge pulses, which are generated by grid instabilities and lightning transients, are a threat
to any product connected to a power source, such as a supply line or a charging port. Surge
pulses are longer pulses of a lower voltage than ESD, but they contain more electric energy
and can destroy unprotected electronic circuits. NXP’s unidirectional TVS diodes have
high surge ratings and high reserve standoff voltages, and offer the best protection for
smartphones and other mobile devices that need regular charging.
ElectroMagnetic Interference (EMI), which is a Radio Frequency (RF) disturbance caused by
electromagnetic conduction, can disturb wired and wireless communication. Increase use
of digital signals in the gigahertz range has increased the need for EMI suppression. NXP’s
Common Mode filters with integrated ESD protection provide high signal integrity, with
industry-leading bandwidth and ESD performance.
Protection solutions for common interfaces
ESD protection
Communication & Computing
Common interfaces
Filtering + protection
Single-line
Multi-line Multi-line
USB3 data lines / Type C
PESD5V0H1BSF
PUSB3FR6
PCMFxUSB30
USB2 data lines / Type C
PESD5V0H1BSF
PUSB3FR4
IP3319CX6
Audio jack, microphone
PESD5V0C1BSF
Keys / buttons, SIM, SD3...
PESD5V0H1BSF
Battery contact, Vbat
USB VBus / charger port
PESD5V0S1UL
Audio speaker
PESD12VV1BL
Wireless charging antenna
PESD12VV1BL
NFC antenna
PESD18VF1BSF
FlexRay
Automotive
Single-line
TVS, surge protection
CAN
Very small voltage
dependency for
capacitance,
in 0603 (0201 inch) size
Optimized for signal integrity,
ESD robustness, and system
protection, provides advanced
ESD protection
PTVS5V0Z1USKN
PTVS12VZ1USKN
200 W (10/1000
µs) surge
protection in a
1.6 x 0.8 x 0.25 mm package
PESD1FLEX
PESD1CAN-U
Lin
PESD1LIN
BroadR-Reach
PRTR5V02UAX
LVDS
PESD1LVDS
SENT
PESD1IVN-U
© 2015 NXP Semiconductors N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and
reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Date of release:
November 2015
Document order number: 9397 750 17689
Printed in the Netherlands
IP4264CZ8-20-TTL (SIM)
Low pass and common
mode filters with industry
leading bandwidth and
integrated ESD
protection
These are just a few of the
solutions NXP can offer.
Unidirectional devices offer
lower clamping voltage Vcl
and dynamic resistance Rdyn
than bidirectional devices,
for superior protection of
sensitive system ICs.
B idirectional
Strong ESD protection,
with minimal
impact
on signal integrity,
for established and
upcoming network
standards
www.nxp.com
at
You’ll find more
www.nxp.com/circuit protection
Also, ask your local NXP
representative for details.
devices are
typically two diodes in backto-back configuration. They’re
often used as a universal
solution, and are well suited
for use with interfaces that
carry positive and negative
voltage signals. Bidirectional
ESD protection also offers
lower diode capacitances
(Cd), which is helpful when
using high-speed data lines.