Download Universal Diversa Sensors Distributor Training

Sensors
Wally Creer
Director of Product Management, Systems Products
|
1
Dual Technology (DT) & PIR Occupancy Sensors
– Diversa dual technology sensors are class leading sensors that
outperform the competition*
– Diversa PIR sensors fill the need for projects requiring a commercial
grade sensor which is easy to use & easy to install
*Fewer false triggers due to HVAC, music, vibration, traffic and lower power consumption
|
2
Technology Overview
|
3
Passive Infrared Sensing
|
4
ADI-Voice* Sensing
•
•
•
•
Proprietary
Listens for vowels
Advanced digital signal processing
Minimizes false triggers:
–
–
–
–
HVAC
Music
Vibration
Traffic
* Patent pending
|
5
Product Overview
|
6
Corner Mount Sensors – WOW Series
• Two-Pole, Dual Technology, Low Voltage Only
• Mounts to flat surfaces – walls, sloped ceilings, ceilings
• Ball and socket design:
– flexibility in mounting and optimizing sensor position
• 2 lens options:
Angle
Range
Mounting
Height (typ).
Corner (C)
90°
70 ft
7-15ft
Large Area (L)
130°
60 ft
7-15ft
Lens
• Options:
– DPR  0-10V dimming; photo sensor; auxiliary relay
|
7
Recessed Ceiling Sensor - WOR Series
•
•
•
•
Extremely low profile (22mm or .88”)
Tilt lens
120/277Vac, 347Vac, low voltage (24Vac)
Lens ranges:
– Standard (S), Extended (X), High Bay (B)
• Options:
–
–
–
–
–
1 or 2-poles
0-10v dimming (D)
Photo Sensor (P)
Auxiliary relay (R)
Low Temp/High Humidity
|
8
Wall Switch – WOS Series
•
•
•
•
•
Manual Override Switch
Vandal Resistant lens
Fits industry standard face plates
120/277Vac, 347Vac, low voltage (24Vac)
Options:
–
–
–
–
–
1 or 2-poles
0-10v dimming (D)
Photo Sensor (P)
Auxiliary relay (R)
Colors – (not stocked – orders for large
quantities can be placed with 12-16 week lead
time)
*Switch plates not included with sensors
|
9
Power Packs
• For use with Diversa low voltages sensors
• 24Vac power supply with relay
• Loads controlled with wall switch or through
sensor
• 120/277Vac or 347Vac models
• 1 or 2-pole models
• Supports up to 8 low voltage sensors
|
10
Diversa Sensors
Recessed Ceiling Sensor
(WOR)
Wall Switch Sensor
(WOS)
Corner Mount Sensor
(WOW)
Dual Technology



PIR Only


120/277VAC


347VAC


24VAC - Low Voltage



|
11
Function/Mode
Description
PIR
DT
Occupancy | Vacancy
Auto-ON / Auto-OFF | Manual-ON / Auto-OFF


Photo Sensing - P models
Inhibits Turn ON when adequate natural lighting occurs


Walk-through Mode
A three minute time-delay is applied if a second occupancy event fails to occur
within 30 seconds of Turn ON.


Long Vacancy Mode
Forced, two-hour Turn OFF delay in the absence of any PIR sensing events
Auto Mode
Activated when Time Delay Dial is set to Auto. sensor learns occupancy patterns
and automatically adjusts time delay.

Restroom Mode (2-pole)
Synchronized Turn ON for both poles; delayed Turn OFF for Pole #2, which is
intended for controlling a fan

Light Level Mode (closed loop
dimming) - DP models
0-10V output used to control light level as needed to maintain desired
illumination level.


LED ON/OFF
Option to turn off sensing indicator LEDs






On-board Switches and Dial
Drive Douglas relay though diode
pulse (low voltage)
Rectified-pulse controlled latching relays
Smart Sense
Although a PIR event is normally required for Turn ON, an ADI-Voice event will do
so for a short period after Turn OFF
Manual Switch Disable
Option to disable manual control on switch-mounted sensors





|
12
Dual Technology Advantages
PIR with ADI-Voice
• Best combination of user
convenience and energy savings
• Fewer false triggers than other
Secondary Technologies
Power Consumption
• ADI-Voice is a passive technology
so it consumes significantly less
power than ultrasonic (Active)
technology
|
13
PIR Advantages
Installation & Configuration
• Pre-configured at factory for easy
“wire and it works” installation
Specs
• Great for competitive SPEC
projects where PIR is called
for
Colors
• White
Positioning
• Competitively featured and
priced
•
Some items stocked
• Ivory, Grey, Black
•
Not stocked
|
14
Configuration on PIR
|
15
Support Materials
|
16
Available Materials
Installation Guide / Cut Sheet
- PIR
Cut Sheet / Installation Guide
- Dual Technology
|
17
Brochure
• Guide to PIR and Dual Technology
Sensors
• PDF will be available on website
• Hardcopy available
|
18
Sensors Product Page
• Website includes:
–
–
–
Cut Sheets
Manuals
Coverage patterns
• Visit: www.unvlt.com/products/wiringdevices-sensors/
|
19
Thank You
|
20