Download Square D® Clipsal® 360° PIR Multi

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

IEEE 1355 wikipedia , lookup

Airborne Networking wikipedia , lookup

Network tap wikipedia , lookup

Transcript
Square D Clipsal 360 °
PIR Multi-Sensor
®
®
The Square D ® Clipsal ® 360° PIR Multi-Sensor combines a
passive infrared receiver (PIR) for occupancy sensing, a
light-level sensor, and an infrared remote receiver into a small,
highly versatile unit. The multi-sensor’s 2.8 inch face diameter
makes it unobtrusive and ideally suited for flush mounting on the
ceiling.
Configuration options for the occupancy sensor include adjustable
time delays for automatic shut-off following a preset time period
without detected motion and an adjustable light-level sensor to
turn on lights automatically when ambient light levels are low or
turn off lights when ambient light levels are sufficient. The built-in
IR receiver accepts commands from an optional handheld remote
controller, making the sensor ideal for classrooms and conference
room areas.
Clipsal 360° PIR Multi-Sensor
Features










360˚ detection pattern, indoor use
Effective detection area of occupancy sensor is more than
800 square feet when unit is mounted 8 feet above the floor.
Effective IR coverage is 800 square feet.
Dual element detectors minimize false triggering
LEDs indicate movement detection and status of the IR
receiver, the occupancy sensor, and the light-level sensor
Can control up to eight C-Bus scenes or directly control
up to eight C-Bus group addresses that can be individually
scheduled
Adjustable light-level sensor has Sunrise/Sunset and clock
overrides
Attractive, low profile unit can be flush mounted on ceiling or
suspended from wall tiles where it is unobtrusive, with a face
diameter of only 2.8 inches
Optional handheld remote controller (SLC5084TX, SLC5088TX)
Non-volatile memory stores operating status for recovery from
a power outage
Receives data and power over a network, so the sensor does
not require power packs or line voltage connections
Distributed Intelligence


Compatible with all Clipsal devices and the Square D ®
Powerlink ® NF3000G3C controller
Easily configured by using Learn Mode or the C-Bus™ Toolkit
Software and a personal computer connected to the C-Bus
network
Specifications
360° PIR Multi-Sensor
Nominal Voltage
Requirements
15‑36 V DC @ 18 mA, drawn from the C-Bus
network
Field of View
360˚
PIR Rated Detection
Field
Typically 800 sq ft (74 sq m) when sensor is
mounted 8 ft (2.4 m) above floor
IR Receiver Rated
Detection Field
Typically 800 sq ft (74 sq m) when sensor is
mounted 8 ft (2.4 m) above floor
Light-Level inhibit
Threshold
0.1 footcandle (1 lux) to full sunlight
Timer Delay
0 sec to 18 hr
Number of Units per
Network
Use the C-Bus Calculator, a software utility, to
determine the total network current load
C-Bus Connection
Two removable terminal blocks, requires CAT 5
data cable
Status Indicators
• PIR Sensor or IR Receiver (activity)
• PIR Sensor (enabled/disabled)
• Light Level Maint. (enabled/disabled)
Dimensions
4.1 in. (L) x 2.8 in. (W)
Field of view from top and side for multi-sensor
mounted 8 ft. above floor
[103 mm (L) x 72 mm (W) ]
Front view of Clipsal 360° PIR Multi-Sensor
Weight
3.2 oz (91 g)
Mounting
•
•
•
•
Operating
Environment
• Indoor only
• 32˚F to 113˚F (0˚C to 45˚C)
• RH: 95%, noncondensing
Standards
• UL: Listed 916 Energy Management
Equipment
• CSA 22.2 Spec 205 Signal Equipment
• FCC: Part 15.101, Class B Digital Device
• EN61000-4-2 Immunity to ESD
Surface: Ceiling
Ht: 8 ft (2.4 m) above floor
Max. Ht: 12 ft (3.7 m) above floor
Min. Ceiling Thickness:: 0.39 in. (10 mm)
Description
Catalog Number
Clipsal 360° PIR Multi-Sensor
SLC5753PEIRL
© 2006 Schneider Electric. All Rights Reserved.
Order Information
ACCESSORIES
Side view of Clipsal 360° PIR Multi-Sensor
IR 4-Button Remote Controller
(ordered separately)
SLC5084TX
IR 8-Button Remote Controller
(ordered separately)
SLC5088TX
Schneider Electric North American Operating Division
Document Number 1250HO0516
295 Tech Park Drive
Square D, the
logo, Clipsal, and C-Bus are trademarks or registered trademarks of
LaVergne, TN 37086
Schneider Elecric and/or its affiliates in the United States and/or other countries.
Tel: 1-888-squared
www.squaredlightingcontrol.com
1/06