Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Square D Clipsal 360 ° PIR Multi-Sensor ® ® The Square D ® Clipsal ® 360° PIR Multi-Sensor combines a passive infrared receiver (PIR) for occupancy sensing, a light-level sensor, and an infrared remote receiver into a small, highly versatile unit. The multi-sensor’s 2.8 inch face diameter makes it unobtrusive and ideally suited for flush mounting on the ceiling. Configuration options for the occupancy sensor include adjustable time delays for automatic shut-off following a preset time period without detected motion and an adjustable light-level sensor to turn on lights automatically when ambient light levels are low or turn off lights when ambient light levels are sufficient. The built-in IR receiver accepts commands from an optional handheld remote controller, making the sensor ideal for classrooms and conference room areas. Clipsal 360° PIR Multi-Sensor Features 360˚ detection pattern, indoor use Effective detection area of occupancy sensor is more than 800 square feet when unit is mounted 8 feet above the floor. Effective IR coverage is 800 square feet. Dual element detectors minimize false triggering LEDs indicate movement detection and status of the IR receiver, the occupancy sensor, and the light-level sensor Can control up to eight C-Bus scenes or directly control up to eight C-Bus group addresses that can be individually scheduled Adjustable light-level sensor has Sunrise/Sunset and clock overrides Attractive, low profile unit can be flush mounted on ceiling or suspended from wall tiles where it is unobtrusive, with a face diameter of only 2.8 inches Optional handheld remote controller (SLC5084TX, SLC5088TX) Non-volatile memory stores operating status for recovery from a power outage Receives data and power over a network, so the sensor does not require power packs or line voltage connections Distributed Intelligence Compatible with all Clipsal devices and the Square D ® Powerlink ® NF3000G3C controller Easily configured by using Learn Mode or the C-Bus™ Toolkit Software and a personal computer connected to the C-Bus network Specifications 360° PIR Multi-Sensor Nominal Voltage Requirements 15‑36 V DC @ 18 mA, drawn from the C-Bus network Field of View 360˚ PIR Rated Detection Field Typically 800 sq ft (74 sq m) when sensor is mounted 8 ft (2.4 m) above floor IR Receiver Rated Detection Field Typically 800 sq ft (74 sq m) when sensor is mounted 8 ft (2.4 m) above floor Light-Level inhibit Threshold 0.1 footcandle (1 lux) to full sunlight Timer Delay 0 sec to 18 hr Number of Units per Network Use the C-Bus Calculator, a software utility, to determine the total network current load C-Bus Connection Two removable terminal blocks, requires CAT 5 data cable Status Indicators • PIR Sensor or IR Receiver (activity) • PIR Sensor (enabled/disabled) • Light Level Maint. (enabled/disabled) Dimensions 4.1 in. (L) x 2.8 in. (W) Field of view from top and side for multi-sensor mounted 8 ft. above floor [103 mm (L) x 72 mm (W) ] Front view of Clipsal 360° PIR Multi-Sensor Weight 3.2 oz (91 g) Mounting • • • • Operating Environment • Indoor only • 32˚F to 113˚F (0˚C to 45˚C) • RH: 95%, noncondensing Standards • UL: Listed 916 Energy Management Equipment • CSA 22.2 Spec 205 Signal Equipment • FCC: Part 15.101, Class B Digital Device • EN61000-4-2 Immunity to ESD Surface: Ceiling Ht: 8 ft (2.4 m) above floor Max. Ht: 12 ft (3.7 m) above floor Min. Ceiling Thickness:: 0.39 in. (10 mm) Description Catalog Number Clipsal 360° PIR Multi-Sensor SLC5753PEIRL © 2006 Schneider Electric. All Rights Reserved. Order Information ACCESSORIES Side view of Clipsal 360° PIR Multi-Sensor IR 4-Button Remote Controller (ordered separately) SLC5084TX IR 8-Button Remote Controller (ordered separately) SLC5088TX Schneider Electric North American Operating Division Document Number 1250HO0516 295 Tech Park Drive Square D, the logo, Clipsal, and C-Bus are trademarks or registered trademarks of LaVergne, TN 37086 Schneider Elecric and/or its affiliates in the United States and/or other countries. Tel: 1-888-squared www.squaredlightingcontrol.com 1/06