Download Section 3 d ethanol

Section 3 d: ethanol
3.9 describe the manufacture of ethanol by passing ethene and steam over a phosphoric acid catalyst at a
temperature of about 300°C and a pressure of about 60–70 atm
3.10 describe the manufacture of ethanol by the fermentation of sugars, for example glucose, at a
temperature of about 30°C
3.11 evaluate the factors relevant to the choice of method used in the manufacture of ethanol, for example
the relative availability of sugar cane and crude oil
3.12 describe the dehydration of ethanol to ethene, using aluminium oxide
Ethanol is a member of the homologous series of alcohols. Its molecular formula is C2H5OH; its
displayed formula is:
Ethanol is used as a fuel, a solvent and in alcoholic drinks. Ethanol is manufactured in two different
ways: catalytic addition of steam and fermentation.
Industrial preparation of ethanol: Hydration of ethane or catalytic addition of steam (water) to ethane
or hydration of ethene.
catalyst/heat/pressure
ethene +
steam

ethanol
Conditions: 300 C, 60-70 atmospheres of pressure and phosphoric acid as catalyst.
Fermentation
Fermentation is a reaction during which sugar is
converted into ethanol and carbon dioxide by yeast which
are single-celled organisms. Yeast has the necessary
enzyme (biological catalyst) which catalyses this reaction.
This reaction is also known as anaerobic respiration as no
oxygen is involved in the reaction.
Respiration is a reaction that gives out energy so the
yeast ferments the sugar to obtain energy for its life
processes; carbon dioxide and ethanol are the waste
products of this reaction. The ethanol can be obtained
through fractional distillation of the mixture.
The equations for fermentation are:
word equation
sugar (e.g. glucose)
enzyme in yeast
ethanol
+
carbon dioxide
balanced symbol equation
C6H12O6 (aq)  2C2H5OH (aq) + 2CO2 (g)
Section 3 d ethanol
1|Page
Conditions: sugar in water, yeast and a temperature of 30 C to 40 C.
As yeast is a living organism the optimum temperature for fermentation is 35 C. At higher temperatures
the reaction nearly stops as the enzyme is broken down or denatured.
After a few days of fermentation, the process stops as the high alcohol content (maximum is around
14%) kills off the yeast. The aqueous alcohol can be concentrated further by fractional distillation which
is what is done in the production of spirits such as whisky, brandy, rum and so on.
Factors affecting choice of method used in manufacture?
The following factors are used to determine the method used to make the ethanol:


Availability of raw material i.e. sugar or crude oil. In countries with no crude oil reserves ethanol is
more likely to be made by the fermentation method; in particular if the climate allows sugar cane to
grow well and there is plenty of land available. Countries where land is scarce or not easy to cultivate
and have oil reserves, hydration of ethane will be the favoured process.
Use of ethanol:
o as solvent: catalytic addition of steam.
o as recreational drink in beer/wines/spirits: fermentation as this process also adds flavour.
Dehydration of ethanol
This is basically the reverse reaction to the catalytic addition of steam to ethene as dehydration means a
reaction in which a water molecule is removed. The apparatus is shown below. This reaction is also
sometimes referred to as the cracking of ethanol.
Conditions: heat and a catalyst such as aluminium oxide or porcelain.
(from http://www.practicalchemistry.org/experiments/dehydration-of-ethanol-to-form-ethene,237,EX.html
visited on 10/1/2011)
Section 3 d ethanol
2|Page