Download The MWS Splitter (SP)

MWS
D ES C R IPTION
MWS, Modular Wiring Systems, provide low cost installation of branch
circuit wiring for lighting and power. Using modular components
that plug together, MWS can be installed in a fraction of the time of
hardwiring. Plus, MWS offers the advantage of relocating fixtures and
outlets in future renovations.
®
Type
Catalog #
Project
Date
Comments
The MWS Splitter (SP) adds an additional connection at any point within
the MWS circuit allowing the circuit to split into two different directions.
Prepared by
DES IGN FEA TUR ES
• UL Listed under Standard 183 for
make or break under load.
• Meets requirements of Article 604
of the National Electrical Code.
• MWS components assembled
with 12 AWG/10 AWG conductors
rated at 20 amperes with full size
ground wire.
• Copper conductors are THHN
insulated wire rated 90°C.
• Galvanized steel exterior with
integral keying for voltage and
amperage.
• Unique double-blade contact
locks into housing preventing
pullout or pushback.
All unused outlets require a MWS
dust cover. All unused outlets
require a MWS dust cover. MWS
ST, S P, S D , C T and TC are
shipped with one dust cover
attached.
• Valox 365 constructed contact
housings are approved for
environmental air plenums.
• Allows for MWS circuit to be split
into two different locations.
SP
DIMENS IONA L D A TA
SPLITTER
SYSTEM VIEW (not to scale)
Modular Wiring System
Extender Cable
2-1/4"
[57mm]
Front
Extender Cable
Fixture Cable
Splitter
1-13/16"
[45mm]
Splitter (SP)
Adds extra power out at any
point in the system.
2-1/4"
[57mm]
5-5/16"
[136mm]
Typical MWS Wiring System
Application shown utilizing
Splitter (SP).
Right
Consult MWS Installation,
Application and Specification
Manual for additional
comprehensive system
information.
Top
MWS AUTOCAD DRAFTING
MWS offers AutoCAD drafting to layout
MWS, providing the contractor with
additional benefits.
ORD ER ING INFOR M A T I O N
S A M P L E N U M B E R : 4 8 SP 1 2 /4 G
MWS design layout time is reduced.
Bills of material are computer-generated
guaranteeing accuracy.
SP
Conductors and Size
12/4G=#12, 4 Conductors Plus Ground (1)
MWS drawing symbols and details
standardized.
Options
Layouts are available on CD or e-mail.
2N=2 Neutral
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
NOTES: (1) Compatible with 5LT components.
Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative
for availability and ordering information.
SH IP P ING D A T A
UnitStandard
Wt.Qty./Carton
1.0 lb.
24
Scale is exaggerated on fixtures and
MWS system applications.
Specifications and
dimensions subject to
change without notice.
YS
ER
TEM
S
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Install dust covers on unused open ends.
C
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
All electrical boxes, conduit, connections
and switches by others.
D
Component
SP=Splitter
S
Voltage
12=120V
20=208V
24=240V
27=277V
34=347V
48=480V
TIFIE
ADF031846
2015-01-15 11:27:54