Download MWS Switch Drop (SD)

MWS
D ES C R IPTION
MWS, Modular Wiring Systems, provide low cost installation of branch
circuit wiring for lighting and power. Using modular components
that plug together, MWS can be installed in a fraction of the time of
hardwiring. Plus, MWS offers the advantage of relocating fixtures and
outlets in future renovations.
®
Type
Catalog #
Project
Date
Comments
The MWS Switch Drop (SD) introduces local switching into the MWS
circuit. Switch Drops may be installed during rough-in or
renovations. MWS Extender Cables bring power from starters to the first
Switch Drop and between consecutive Switch Drops.
Prepared by
Switch Drops can also be connected together for multiple switch
locations.
DES IGN FEA TUR ES
• UL Listed under Standard 183 for
make or break under load.
• Copper conductors are THHN
insulated wire rated 90°C.
• Meets requirements of Article 604
of the National Electrical Code.
• Galvanized steel exterior with
integral keying for voltage and
amperage.
• MWS components assembled
with 12 AWG/10 AWG conductors
rated at 20 amperes with full size
ground wire.
• Cable end supplied with 1/2”
connector with locknut and 6” prestripped leads.
• Introduces single or multiple local
switching into the MWS circuit.
• Valox 365 constructed contact
housings are approved for
environmental air plenums.
All unused outlets require a MWS
dust cover. MWS ST, S P, S D , C T
and TC are shipped with one dust
cover attached.
SD
SWITCH DROP
D IMENS IONA L D A TA
Modular Wiring System
SYSTEM VIEW (not to scale)
Extender Cable
Side
2-1/4"
[57mm]
Switch Drop
Fixture Cable
Fixture Cable
2-1/4"
[57mm]
5-5/16"
[136mm]
1-13/16"
[45mm]
Top
Typical MWS Wiring System Application shown utilizing
Switch Drop (SD).
Consult MWS Installation, Application and Specification
Manual for additional comprehensive system information.
ORD ER ING INFOR M AT I O N
MWS drawing symbols and details
standardized.
SD
Layouts are available on CD or e-mail.
Switching Function
3L=Single Circuit, Three Level
DC=Dual Circuit, Dual Level
DL=Single Circuit, Dual Level
SL=Single Circuit, Single Level
Cable Length (Feet)
01=1'
09=9'
15=15'
SH IP P ING D A T A
NOTES: (1)Available in #12 AWG only, rated at 20 amperes.
Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative
for availability and ordering information.
Cable
Length
1'
9'
15'
All electrical boxes, conduit, connections
and switches by others.
Install dust covers on unused open ends.
Scale is exaggerated on fixtures and
MWS system applications.
Specifications and
dimensions subject to
change without notice.
YS
ER
TEM
S
Eaton’s Cooper Lighting Business
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
UnitStandard
Wt.Qty./Carton
1.8 lbs.
15
3.6 lbs.
10
5.0 lbs.
6
To utilize this service and for additional
information, contact the MWS Sales
Department (888) 487-4887.
C
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Options
N=Neutral Dropped to Switches
S
Component
SD=Switch Drop (1)
MWS design layout time is reduced.
Bills of material are computer-generated
guaranteeing accuracy.
S A M P L E N U M B E R : 2 7 SD SL 0 9
Voltage
12=120V
27=277V
34=347V
MWS AUTOCAD DRAFTING
MWS offers AutoCAD drafting to layout
MWS, providing the contractor with
additional benefits.
D
Front
Switch Drop (SD)
Adds local line voltage switching. Switch Drop is attached
directly to the switch junction box in the wall or to a
junction box above the wall. Connect conductors to
switches as required.
TIFIE
ADF031845
2015-01-15 10:56:15