Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Chapter 6 Operating Systems 1 Learning outcomes Describe the functions of the Operating System and its components. Explain where the operating system is usually stored and how it gets started. Explain the concept of process • Process control block? Explain how the long-term, short-term and medium-term schedulers operate. Explain how the operating system manages memory • Partitioning, swapping, paging, demand paging Explain how the operating system manages I/O devices • Programmed I/O, Interrupt-driven I/O, DMA Explain the concept of Interrupt • Describe how interrupts are caused. 2 Additional Reading Essential Reading Further Reading • Stalling (2003): Chapter 7 and 8 • • • Brookshear (2003): Chapter 3.1 – 3.4 Flynn and McHoes (2001): Chapters 1,2,3,4,5 and 7. Silberschatz et al. (2002): Chapters 1,4,6,9,10, and 13 3 What is an operating system? A program that runs on the hardware and supports • • Abstracts and standardises the interface to the user across different type of hardware • Resource Abstraction Resource Sharing Virtual machine hides the messy details witch must be performed. Manages the hardware resources • • Each program gets time with the resource Each program gets space on the resource 4 Introduction (1) The aims of an operating system are: • User convenience • System performance • Number of requests serviced per unit time, etc 5 Introduction (2) Fundamental tasks of an operation system • • • Management of Programs • • Organize their execution by sharing the CPU Ensure good user service and efficient use Management of Resources • Efficient allocation/de-allocation without constraining user programs Security and Protection • Ensure absence of interference with programs and resources by entities within and outside the operating system 6 Operating Systems Application programs needs to access the devices connected to a computer. Operation System: (system program – slide-19, chapter 2). • • • • is a software layer between the hardware and the user. provides a consistent application program interface (API). first program that runs when the computer boots up. is a program that is always running when the machine is on. 7 Main functions of an operating system 1. 2. User/computer interface: • Provides an interface between the user and the computer Resource manager: • manages all computer’s resources. • • • • Process manager Memory manager Device manager File manager, etc. 8 A model of an operation System User command interface Process Manager Operation System Memory manager Resource management Device Manager File manager Network manager 9 Operating system as a user/computer interface A user command such as open, save or print would correspond a sequence of machinecode instructions. The user does not need to provide these sequences of instructions. Operating system translates these commands to a machine-code instructions. 10 Operating system as a resource manager Resource management Process Manager: • Next program to be executed? • Time to be given to each program? Memory manager: • Best use of the memory to run as many programs as possible I/O Device (e.g.printer) Manager: • Which program should use a particular I/O device? Network manager: • which computer should execute a particular program? 11 Type of operating systems Multi-programming • Operating system can handle several programs at once. Time-sharing • Operating system allows many user to share the same computer and interact with it. • Or, in case of a single-user computer (e.g. PC), the user can work on several programs at the same time. 12 How the operating system get started? Main memory has a small section of permanent read only memory (ROM) ROM contains a program, bootstrap. At the start the CPU runs bootstrap. Which directs the CPU to load the operation system from disk and transfer control to it. 13 Main memory R O M R A M Main memory Disk storage Bootstrap program Operating System Bootstrap Program Operating System R O M R A M 14 Operating system as a process manager Coordinates the occupation of the main memory by different processes and their data. At any time the operation system may be dealing with many processes. e.g. a process may be executed or allowed to wait in main memory, or swapped out of the main memory. 15 Processes Definition of a process Process Scheduling Operations on Processes Cooperating Processes 16 What is a process Process – a program in execution; process execution must progress in sequential fashion. A process includes: • • • • program counter stack data section heap 17 The Stack and the Heap An important thing to understand about variable storage is the difference between the program stack and the heap. Memory in the stack is of a fixed size. Each function has its own set of variables that reside in the stack storage, which are pushed on and popped off the program stack as the program moves in and out of functions. When you declare a simple variable, you are making room for it on the program stack. int myInteger = 10; int myResult = myInteger * 100; This is possible because we know the exact amount of memory each of these variables require. (These variables can also reside in registers, so simple arithmetic operations can be executed very quickly.) 18 The Stack and the Heap Memory in the heap must be allocated, that is, it must be requested and assigned by the operating system. This is a slower operation because it typically requires more operations than simply writing or reading a single value from a memory location. The amount allocated can be determined at run time. For example, creating a variable that holds a string, the size of which we can’t know before hand, requires an allocation from the heap: string s = Console.ReadLine(); Instead of storing the entire string on the stack, a reference to the string is stored on the stack, and the string itself is stored on the heap. 19 Process State As a process executes, it changes state • • • • • new: The process is being created. running: Instructions are being executed. waiting: The process is waiting for some event to occur. ready: The process is waiting to be assigned to a process. terminated: The process has finished execution. 20 Process Control Block (PCB) Information associated with each process. Identifier Process state Program counter CPU registers CPU scheduling information Memory-management information Accounting information I/O status information 21 CPU Switch From Process to Process The PCB is saved when a process is removed from the CPU and another process takes its place (context switch). 22 Process Scheduling Queues Job queue – set of all processes in the system. Ready queue – set of all processes residing in main memory, ready and waiting to execute. Device queues – set of processes waiting for an I/O device. Process migration between the various queues. 23 Schedulers Long-term scheduler (or job scheduler) – selects which processes should be brought into the ready queue. Short-term scheduler (or CPU scheduler) – selects which process should be executed next and allocates CPU. 24 Medium Term Scheduling Time sharing Operating systems may introduce a medium term scheduler Removes processes from memory (and thus CPU contention) to reduce the degree of multiprogramming – swapping Swapping may be needed to improve the process mix or to free up memory if it has become overcommitted 25 Intermediate queue Job Process queue request Ready queue CPU I/O I/O I/O I/O End 26 Scheduling Criteria CPU utilization – keep the CPU as busy as possible Throughput – # of processes that complete their execution per time unit Turnaround time – amount of time to execute a particular process • waiting to get into memory + waiting in the ready queue + executing on the CPU + I/O Waiting time – amount of time a process has been waiting in the ready queue Response time – amount of time it takes from when a request was submitted until the first response is produced, 27 Optimization Criteria Max CPU utilization Max throughput Min turnaround time Min waiting time Min response time In most cases we optimize the average measure 28 Scheduling Algorithms First-Come, First-Served (FCFS) Process Burst Time P1 24 P2 3 P3 3 Suppose that the processes arrive in the order: P1 , P2 , P3 The Gantt Chart for the schedule is: P1 0 P2 24 P3 27 30 Waiting time for P1 = 0; P2 = 24; P3 = 27 Average waiting time: (0 + 24 + 27)/3 = 17 CPU–I/O Burst Cycle – Process execution consists of a cycle of CPU execution and I/O wait. 29 FCFS Scheduling (Cont.) Suppose that the processes arrive in the order P2 , P3 , P1 The Gantt chart for the schedule is: P2 0 P3 3 P1 6 30 Waiting time for P1 = 6; P2 = 0; P3 = 3 Average waiting time: (6 + 0 + 3)/3 = 3 Much better than previous case. Average waiting time is generally not minimal and may vary substantially if the process CPU-burst times vary greatly 30 FCFS Scheduling (Cont.) FCFS is non-preemptive Not good for time sharing systems where each user needs to get a share of the CPU at regular intervals Short process(I/O bound) wait for one long CPU-bound process to complete a CPU burst before they get a turn • lowers CPU and device utilization 1. I/O bound processes complete their burst and enter ready queue – I/O devices idle and I/O bound processes waiting 2. CPU bound process completes CPU burst and moves to I/O device 3. I/O bound processes all quickly complete their CPU bursts and enter I/O queue – now CPU is idle 31 Shortest-Job-First (SJR) Scheduling Associate with each process the length of its next CPU burst. Use these lengths to schedule the process with the shortest time (on a tie use FCFS) Two schemes: • • • nonpreemptive – once CPU given to the process it cannot be preempted until completes its CPU burst. preemptive – if a new process arrives with CPU burst length less than remaining time of current executing process, preempt. This scheme is known as the shortest-Remaining-Time-First (SRTF). SJF is optimal – gives minimum average waiting time for a given set of processes. 32 Example of Non-Preemptive SJF Process Arrival Time P1 0.0 P2 2.0 P3 4.0 P4 5.0 SJF (non-preemptive) P1 0 3 P3 7 Burst Time 7 4 1 4 P2 8 P4 12 16 Average waiting time = (0 + 6 + 3 + 7)/4 = 4 33 Example of Preemptive SJF Process Arrival Time Burst Time P1 P2 P3 P4 0.0 2.0 4.0 5.0 7 4 1 4 SJF (preemptive) P1 0 P2 2 P3 4 P2 5 P4 7 P1 11 16 Average waiting time = (9 + 1 + 0 +2)/4 = 3 34 Priority Scheduling A priority number (integer) is associated with each process The CPU is allocated to the process with the highest priority (smallest integer highest priority). • Can be preemptive (compares priority of process that has arrived at the ready queue with priority of currently running process) or non-preemptive (put at the head of the ready queue) SJF is a priority scheduling where priority is the predicted next CPU burst time. Problem Starvation – low priority processes may never execute. Solution Aging – as time progresses increase the priority of the process. 35 Round Robin (RR) Each process gets a small unit of CPU time (time quantum), usually 10-100 milliseconds. After this time has elapsed, the process is preempted and added to the end of the ready queue. If there are n processes in the ready queue and the time quantum is q, then each process gets 1/n of the CPU time in chunks of at most q time units at once. No process waits more than (n-1)q time units. 36 Example of RR with Time Quantum = 20 Process P1 P2 P3 P4 The Gantt chart is: P1 0 Burst Time 53 17 68 24 P2 20 37 P3 P4 57 P1 77 P3 97 117 P4 P1 P3 P3 121 134 154 162 Typically, higher average turnaround than SJF, but better response. 37 Memory Management When a process is executed it has to be in main memory as the main memory can be accessed quicker. An efficient use of the main memory is an important task of the operation system. Different memory management techniques are used for this purpose. 38 Memory partition How processes are arranged in the main memory before been executed? Fixed-sized partitions Variable-sized partitions 39 Fixed-sized partitions OS 8M 8M 8M 8M 8M 40 Variable-sized partitions OS 8M 2M 4M 8M 18M 41 Swapping I/O operations are slow If a running process requires an I/O operation. The CPU will move to another process in the main memory. Suppose the main memory is full of processes waiting on I/O. CPU becomes idle To solve this problem Swapping technique is used. 42 disk Main memory No Swapping Long-term queue Operation System Completed processes Main memory Long-term queue With Swapping Medium-term Operation System Completed processes 43 os a os os os P1 P1 P1 p2 p2 p3 c d os os os b os P1 P1 P3 e p2 P4 P4 P4 P3 p3 p3 f g h 44 Fragmentation Memory is divided into partitions Each partition has a different size Processes are allocated space and later freed After a while memory will be full of small holes! • No free space large enough for a new process even though there is enough free memory in total If we allow free space within a partition we have internal fragmentation Fragmentation: • • External fragmentation = unused space between partitions Internal fragmentation = unused space within partitions 45 Problems with swapping Swapped process are I/O output processes. I/O processes are slower. The swapping process is slow as well. Solution: • Reduce the amount of codes that needs to be swapped. • Paging 46 Paging A program is divided into small fixed-sized chunks(pages). Main memory is divided into small fixed-sized chunks (frames). A page is stored in one frame. A program is stored in a set of frames. These frames do not need to be continuous. 47 disk Process A page 0 page 1 page 2 page 3 disk 13 14 15 16 In use 17 In use 18 19 In use 20 Process A 13 page 0 page 1 page 2 page 3 14 page 0 of A page 1 of A page 2 of A 15 16 In use use 17 In page 3 A- page table 18 of A 13 In use 19 14 15 20 18 48 Logical and physical address disk Process A page 0 page 1 page 2 page 3 13 14 page 0 of A page 1 of A page 2 of A 15 16 In use 17 In use page 3 A- page table 18 of A 13 19 In use 14 20 15 18 Page 1 I . . . J(30) Logical address(J) 1:30 Physical address(J) 14:30 49 simple paging is not efficient Better than fixed and variable-sized partitions. OS - loads all pages of a process in the main memory. However, not all pages of a process need to be in the main memory in order to be executed. OS - can still execute a process if only some of the pages are loaded Demand paging. 50 Demand paging Operating system – loads a page only when it is required No swapping in or out of unused pages is needed. Better use of memory. CPU can access only a number of pages of a process at one time. Then asks for more pages to be loaded. 51 Virtual memory Demand paging gives rise the concept of virtual memory. Only a small part of a process needs to be in main memory at one time. Programs which require bigger memory that main memory can still be executed. Impression of a bigger computer memory. This concept of the main memory is called virtual memory. Demand paging and virtual memory are widely used in today’s operation systems (wind-2000, XP). 52 Interrupts Definition of ‘Interrupt’ Event that disrupts the normal execution of a program and causes the execution of special instructions 53 Interrupts Interrupt Program time t 54 Interrupts Program time t 55 Interrupts Interrupt Program Program Interrupt Service Routine time t 56 Interrupts fahrenheit = (cent * 9/5 )+ 32 Interrupt Program mov R1, cent mul R1, 9 div R1, 5 add R1, 32 mov fahr, R1 time t 57 Interrupts Interrupt Program Program mov R1, cent mul R1, 9 Interrupt Service Routine time t 58 Interrupts Interrupt Program mov R1, cent Program Save Context Interrupt Service Routine Restore Context mul R1, 9 time t 59 Interrupts Interrupt Program mov R1, cent Program Save Context eg push R1 Interrupt Service Routine Restore Context mul R1, 9 eg pop R1 time t 60 CPU Switch From Process to Process The PCB is saved when a process is removed from the CPU and another process takes its place (context switch). 61 I/O devices Called peripherals: • • • • • • • • Keyboard Mouse Speakers Monitor scanner Printer Disk drive CD-drive. OS – manages all I/O operations and devices 62 OS - I/O management There are four main I/O operations. • Control: • • • tell the system to perform some action (e.g. rewind tape). Test: check the status of the device Read: read data from the device Write write data to the device. 63 I/O modules System bus CPU Main memory I/O module I/O device I/O module I/O device 64 Advantages of I/O modules They allow the CPU to view a wide range of devices in a simple-minded format CPU does not need to know details of timing, format, or electronic mechanics. CPU only needs to function in terms of a simple read and write commands. They help the CPU to work more efficiently They are 3 ways in which I/O modules can work • • • Programmed I/O Interrupt-driven I/O Direct memory access. 65 Programmed I/O The CPU controls I/O device directly Via the I/O modules. The CPU sends an I/O command to the I/O module. And waits until the I/O operation is completed before sending another I/O command. The performance is poor as the CPU spends too much time waiting the I/O device. 66 Programmed I/O Issue Read to I/O module Check status Ready Read word from I/O module Write word To memory NO done Next instruction yes 67 Interrupt-driven I/O The CPU issues a command to the I/O module and then gets on with executing other instructions. The I/O module interrupts the CPU when it is ready to exchange data with the CPU. The CPU then executes the data transfer. Most computer have interrupt lines to detect and record the arrival of an interrupt request. 68 Interrupt-driven I/O Issue Read to I/O module CPU goes to do Other things Check status When the status Is ready the I/O module sends An interrupt-signal Ready Read word from I/O module Write word To memory NO done Next instruction yes 69 How does I/O module send an interrupt to the CPU? I/O module is linked to the control bus. I/O module reads a word from the I/O device. Puts the word in the data register which is linked to data bus. Sends a interrupt signal to the CPU via control bus. 70 How does CPU know Interruptsignal? The CPU executes an instruction cycle. An interrupt stage is added at the end of the cycle. At the end of an instruction cycle the CPU checks for interrupts. The CPU hardware has a wire, interrupt-request line that the CPU can sense. If no interrupt the CPU carries on executing next instruction. Otherwise, it updates the process control block, save it. Then process the interrupt. Resume the execution of the interrupted process. 71 How does CPU process interrupts? Interrupt detection. CPU executes Interrupt-handler program. Interrupt-handler program makes use of the process control block save earlier. Interrupt-handler decides what to do with interrupt. Then asks the CPU to resume the execution interrupted. 72 Disadvantages of Interruptdriven I/O CPU is responsible for managing I/O data transfer. Every transferred word must go through the CPU. Devices with large transfer, e.g. disk drive, the CPU wastes time dealing with data transfer. Solution: Direct-memory-access(DMA). 73 Direct-memory-access - DMA Special-purpose processor. Handles data transfer. CPU issues to the DMA: • starting address in main memory to read/write to. • Starting address in the I/O device to read/write to. • The number of words to be transferred. DMA transfers data without intervention from the CPU. DMA sends interrupt to the CPU when transfer is completed. 74 DMA/CPU - bus system DMA take care data transfer. CPU free to do other jobs. However, they can not use the bus at the same time. DMA can use the bus only when the CPU is not using it. Some times it has to force to CPU to free the bus, cycles stealing. 75 DMA/CPU System bus DMA CPU Main memory I/O module I/O device 76 Summery OS- memory manager • Fixed-sized partition: waist of memory. • Variable-sized partition: fragmentation. • Swapping. Time wasted in swapping the whole process • Simple paging: process divided into pages and loaded • into main memory(divided into frames). Demand paging: only the required pages are loaded to main memory. OS- I/O manager • Programmed I/O: CPU waste waiting for I/O operation. • Interrupt-driven I/O: CPU responsible for data transfer. • DMA: takes care of data transfer instead the CPU. 77 fin Thank you and good luck 78