Download Battery Cell Impedance Measurement (EIS) PSM3750 FRA + BATT470m

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Document related concepts

Mains electricity wikipedia, lookup

Electric battery wikipedia, lookup

Islanding wikipedia, lookup

Mechanical filter wikipedia, lookup

Alternating current wikipedia, lookup

Buck converter wikipedia, lookup

Resistive opto-isolator wikipedia, lookup

Tube sound wikipedia, lookup

Immunity-aware programming wikipedia, lookup

Mathematics of radio engineering wikipedia, lookup

Mechanical-electrical analogies wikipedia, lookup

Opto-isolator wikipedia, lookup

Scattering parameters wikipedia, lookup

Earthing system wikipedia, lookup

Two-port network wikipedia, lookup

Distributed element filter wikipedia, lookup

Rectiverter wikipedia, lookup

Network analysis (electrical circuits) wikipedia, lookup

Impedance matching wikipedia, lookup

Zobel network wikipedia, lookup

Nominal impedance wikipedia, lookup

Transcript
Newtons4th Ltd
[email protected]
www.newtons4th.com
Battery Cell Impedance Measurement (EIS)
PSM3750 FRA + BATT470m
Electrochemical Impedance Analysis Package
ESF10m
BATT470m
The BATT470m Electrochemical Impedance Analysis Package provides a simple to use, wideband impedance
analysis solution for the electrochemical market. The BATT470m, coupled with the PSM3750 Frequency Response
Analyzer provides impedance measurement of batteries/cells up to 100V DC. With a frequency range of 100mHz to
1MHz, equivalent circuit analysis as well as wideband impedance measurement is quick and simple using
PSMComm2 software.
Model
BATT470m
Shunt nominal inductance:
Nominal
Resistance
470mΩ ± 0.1%
Phase
Error
0.1º / kHz
Continuous
Current
1Arms
Voltage
Rating
100V DC
Input
Connector
4mm, BNC
< 1nH
CH2 connector:
Safety BNC –
Non isolated with inverted polarity
(Output is at line potential therefore
safety BNC to BNC leads must be
used for instrument connection)
Protection rating
EIS Package Consists of:
100V Cat I
PSM3750
Batt470m
2x ESF10m
PSMComm2 - EIS Mode (Randles Cell equivalent circuit modelling)
Newtons4th Ltd 1 Bede Island Road Leicester LE2 7EA UK Tel +44 (0)116 2301066