Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Used Eagle LXS / 84 louver and perforated tube high speed production machine. May 2007 Specification explanation and information. Offered by Foxx Spectrum Ltd. What does the machine do? • The machine takes either perforated or louvered steel or stainless steel sheets, it forms them around a mandrel then mechanically lock-seams them either internally or externally. Products produced Mechanically lockseamed tubes. Tube sizes. • Max length:- 600 mm single feed. • Max length:- 300 mm single feed. {feed in two sheets at a time} • Max Diameter:- 70 mm • Tube wall :- thickness 0.5 / 1 mm Output Feed single sheet. A 600 mm long tube can be produced every 5 seconds. On 3 shifts, this means around, 4,320,000 per year! • Double sheet feed A 300 mm long tube can be produced every 2.5 seconds. On 3 shifts this means approximately 8.640,00 per year. Feed table • The feed table can be set to work with one sheet as a time. {for tubes over 300 mm in length.} • The feed table can be split in two for sheets less than 300 mm in length, so two tubes can be produced per cycle. Simple operation description. The EAGLE LXS/.L-84 is a compact, self-contained machine designed for forming and lock-seaming louvered or perforated sheets. The motor drive and hydraulic components are mounted on top of the hydraulic oil reservoir as part of the base and are easily accessible. One or two (depending on length of tube) pre-notched and louvered/perforated sheets are placed into the sheet feed and are fed into the work area up. against an adjustable back stop. A hinged roller die assembly rises to grip the sheet(s) between the pressure bar and the mandrel. The rollers continue rolling the sheet(s) around the mandrel forming a "U" section. An overhead, traveling lock-seaming carriage advances, forming and locking the seam in one operation. As the carriage returns, the sheet(s) are automatically stripped from the mandrel. Tool change is quick and easy’ requiring only a mandrel change for various tube diameters and a few simple adjustments. Tool Change mandrel Tool adjustment carriage Other information. • • • • • • • Age 20 years. Condition. Good in full running order. Racine hydraulics – Allen Bradley electrics. Voltage 230 3ph. 60 z. Control voltage 115 Power :- 15 HP / 11.25 KW. Floor size:- 42700 mm by 1220 wide. Price and terms • New price is approximately 160,000 USD{92,000 British pounds} • Offer price is 29,000 British pounds. • Offered clean functioning and running loaded on truck Wirral UK. • Machine is offered without tooling. • Tooling can be quoted, used or new.