Download TStik2TM - now RoHS compliant

TStik2
TM
SYSTRONIX®
- now RoHS compliant
TINI400 JavaTM Network Module
TStik2 brings the TINI400 chipset in
the popular Simm72 form factor
used by TINI390.
TStik2 is ideal for adding low-cost
10/100BaseT ethernet, 1-Wire,
CAN, I2C, SPI, RS232, and more to
your product.
TStik2 - a complete
Java-programmable
network module which
anyone can afford.
TStik2 - 10/100BaseT,
PPP, HTTP, FTP,
Telnet, TCP/IP.
TStik2 - 1-Wire, CAN,
3xRS-232, I2C, SPI.
TStik2 - Three UARTs
plus simultaneous CAN
and I2C.
TStik2 - now RoHScompliant
TStik2 has many benefits relative to
TStik1 and other TINI400 modules:
Improved NVRAM battery life,
simultaneous CAN and I2C, Serial1
is now available as a UART, and
CAN baud rates are now integer
multiples of 1 MHz. Plus, TStik2 is
now RoHS-compliant!
The Dallas Semiconductor TINI
architecture has blazed new
pathways in the world of
embedded control, at an
unprecedented price point.
• Dallas Semiconductor DS80C400 TINI
Java Processor. Executes Java code
in a firmware JVM with an 8-bit
internal architecture.
• 1024 KBytes NVRAM, 2 MBytes Flash.
8-bit wide internal memory data path.
• Three UARTs at up to 115 kbaud.
Serial0 is RS-232 output, serial1 is
TTL output level or 1-Wire, serial4 is
TTL output level and has hardware
handshaking. Serial1 can be
switched "on the fly" between 1-Wire
network and generic asynchronous
serial modes.
• 10BaseT or 100BaseTX ethernet with
RJ45 & LEDs.
TStik2's DS80C400 TINI Java
controller core is optimized for use • On-module CAN 2.0B controller, 1Wire, I2C, SPI, and additional I/O pins
with a Java Virtual Machine.
TStik2 is "real Java". It includes
threading, garbage collection, and
dynamic class loading. Use any
standard Java Development Kit to
create your class files. TStik
supports standard java packages
such as javaxcomm for serial I/O,
Web servers, XML parsers,
lightweight JINI, encryption, and so
forth.
TStik2 is ideal for low cost,
embedded ethernet or embedded
Java applications.
Java is a TradeMark of Sun Microsystems, Inc
TStik and JSimm are TradeMarks of Systronix, Inc
1-Wire and TINI are TradeMarks of Dallas Semiconductor Corp
SimmStick is a TradeMark of Dontronics
for expansion. CAN and I2C can be
active at the same instant.
• Simple, very robust subset of the TINI
Simm72 bus. No memory-mapped I/
O, and greatly improved ESD
resistance compared to TINI390.
• Low power internal 3.3V system,
accepts 5VDC as external power.
• Power and status LEDs
• TStik2 rev 2.2 and later is RoHScompliant
• Development kits are available.
WWW.TSTIK.COM
FOR INFORMATION, PRICES & ORDERS
TINI400 in the popular Simm72 package!
TECHNICAL DETAILS
TStik brings the features and benefits of the DS80C400 TINI Java controller to the
popular Simm72 form factor used by TINI390. TStik will work in any welldesigned TINI390 socket where memory mapped I/O is not required.
Support for open Java standards
TStik is real Java. Use your favorite Java tools to create standard Java class files,
using common packages such as javaxcomm, JXTA, XML parsers, etc. Then load
your programs via FTP and monitor and control TStik via Telnet.
Designed for OEM use
TStik has several design features intended to make it very rugged and resistant to
ESD and surges on the ethernet lines. TStik includes Systronix proprietary reset
and control circuitry. We applied what we learned in three years of experience with
the TINI390 module, to make TStik easy to configure, and rugged and reliable
enough for years of dependable use. TStik2 adds additional features requested by
industrial users (see the Technical Details sidebar).
Processor DS80C400, 8-bit internal core, ALU, and
memory. Firmware JVM in first 512 KBytes of flash. 15
Mhz crystal, X2 PLL multiplier for 30 MHz operation.
Java Support True Sun-licensed Java, based on JDK 1.1.8
with enhancements. Supports standard Java class files and
libraries such as javaxcomm.
Memory 8-bit wide data path to 512 KBytes or 1024
KBytes e of 55 nsec NVRAM plus 2 MBytes of 70 nsec
flash (1.5 MBytes above the JVM are free for your use).
Power Unregulated 5 VDC +/- 10%, with on-board 3.3V
regulator. Typical active current requirement less than 200
mAwith ethernet PHY active. Ethernet PHY shutdown
saves up to 100 mA.
TStik includes memory, ethernet controller and magnetics, crystal, power converter, reset logic, and all other necessary circuitry. All you have to provide is
power and I/O connectors.
Serial I/O Three hardware UARTs for asynchronous serial
I/O at up to 115 kbaud. Serial0 is RS232 with on-board
level shifters but no hardware handshaking. Serial4 is TTLlevel serial I/O with optional hardware handshaking lines.
Serial1 can be switched "on the fly" between 1-Wire or
TTL-level serial I/O use, with no jumpers.
The on-board ethernet controller and TCP/IP stack provide an open, standardsbased ethernet API for rapid network application development.
1-Wire Serial1 can support a Dallas 1-Wire network
through its on-board DS2480B.
TStik Makes Embedded Java Hardware Easy and Inexpensive
User I/O Expansion
To keep TStik.72.nb simple and low cost, it does not have a memory-mapped I/O
bus. But market research showed that 80% or more of the potential uses of TStik
did not require the expense of memory-mapped I/O.
TStik has many other I/O expansion options - CAN, I2C, SPI, asynchronous serial,
and 1-Wire. TStik includes sixteen I/O bits which can be used for your own
purposes, or for optional features such as SPI (7 bits), serial4 (6 bits), CAN/I2C (4
bits) and external interrupt zero (1 bit).
All I/O pins are TTL-level compatible (thresholds of 0.8 and 2.0 volts) and are 5volt tolerant. They are compatible with 3V and 5V TTL and 3V CMOS logic. Like
other 3V systems, they are not compatible with 5V CMOS which has a 2.5V
threshold. Systronix socket boards add additional I/O and signal buffering.
Plug-on JSimm, I2C, SPI or 1-Wire modules for ADC, DAC, digital I/O, IrDA,
RF, graphic LCD, power relays, and more are available or under development.
Many current SimmStick modules are JSimm compatible.
Ethernet
10BaseT/100BaseTX ethernet controller and magnetics are on-board. TStik
supports optional NetBoot startup devices.
Jumperless Configuration
CAN supports the legacy shared pins with I2C, but can
also support independent and simultaneous use with I2C,
switchable at runtime without jumper changes. TStik2 runs
at 30.00 MHz for precise high speed CAN baud rates.
I2C supports the legacy shared pins with CAN, but can
also support independent and simultaneous use with CAN,
switchable at runtime without jumper changes.
SPI MISO, MOSI, CLK and four slave chip selects.
Ethernet 10BaseT or 100BaseTX with LEDs on board
Easy Programming Instructions and tutorials are on-line
at http://www.tstik.com/documentation.html and http://
www.tstik.com/appnotes.html
Package 4.00 x 1.25 x 0.375 inches, SIMM72 with
immersion-gold-over-nickel pads 0.050 inch on center.
Environmental Commercial temperature 0 to 70 deg C.
RoHS compliant (PCB rev 2.2 and later).
Support & Warranty Fully TINI compatible with online
support from Dallas and Systronix. Please refer to the
online documentation for detailed I/O pin assignments,
API for special I/O, etc. One year warranty against defects.
Ethernet option jumpers can be left installed in all but very special cases, and TStik
will plug-and-play in existing TINI390 socket boards or new TStik sockets. Rather
than jumpers for most options, TStik uses a configuration register implemented in
an on-board CPLD.
Developer Community
New RoHS Version
Prices:
There is a very large, enthusiastic, and helpful TINI developer community as well
as outstanding support from Dallas and Systronix.
Development Tools and Examples
Visit www.tstik.com for current prices. Special offers and
development bundles may be available. Options include
DIN rail mounting, I/O modules, cables and enclosures.
You create TINI programs with standard Java development tools. For complete
information see the tutorials links on the TStik web site.
SYSTRONIX
®
939 Edison Street, Salt Lake City, Utah, USA 84111
Tel:+1-801-534-1017 Fax:+1-801-534-1019 www.systronix.com
WWW.TSTIK.COM
FOR INFORMATION, PRICES & ORDERS
revised 2006 Aug 24 bboyes