Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download FMod-TCP DB
Document related concepts
History of electric power transmission wikipedia , lookup
Immunity-aware programming wikipedia , lookup
Alternating current wikipedia , lookup
Resilient control systems wikipedia , lookup
Distributed control system wikipedia , lookup
Stray voltage wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Electrical connector wikipedia , lookup
Power electronics wikipedia , lookup
Power MOSFET wikipedia , lookup
Distribution management system wikipedia , lookup
Voltage optimisation wikipedia , lookup
Opto-isolator wikipedia , lookup
Transcript
FMod-TCP DB Datasheet This device is a TCP/IP server board which allows manufacturers and system integrators to connect different devices, such as home appliances, industrial sensors and industrial control systems, directly to the Ethernet network, and to remotely monitor and control those while using standard TCP/IP protocols. A web page can be downloaded to this device, allowing users to be OS independent. Features Ethernet Analog inputs (0-5V, 10bits A/D) (Can be used for thermocouples, voltage monitoring…) 5 Analog inputs 0-5V Digital I/O (Can be used with 220V AC static relays, optocouplers…) 19 I/O 2 wires I2C serial bus (SDA+SCL) (Allows access to various sensors, flash memory, IC’s...) 1 I2C UART serial port (with hardware flow control) (Allows interfacing compatible devices like scopes, pumps...) 1 UART IP Protocol conversion ARP TCP/UDP H T TP 44KB HTML + JAVA Available protocols Ethernet: Based on standard 10BaseT NIC controller. Internet layer: IP & ARP. Transport layer: TCP + UDP & ICMP (ping) (up to 4 simultaneous users in TCP). Application layer: HTTP + JAVA dedicated to simple pages and files saved in flash (44kB). Access to UART, I2C, I/O, A/D and to configuration registers. Support Many support tools are provided (free of charge and redistributable): PC interface (for Windows OS) Sample Java Applet source code C++ source code and drivers (C compliant DLL) Wireshark plugin (Ethernet frame capture application) Those tools allow customers to easily develop their own application or java applet to control their equipments. Connectors and electrical specifications RJ45 connector for Ethernet. Two standard DIL connectors for I/O, A/D, UART and I2C bus. The power supply is protected against negative and over voltage. The typical power consumption is 50mA. The supply voltage is 5V ± 5%. Dimensions 55x51x23 mm (LxBxH) Where to find more information Please download the user’s manual from the following address: http://www.fiveco.ch/section_motion/support_motion_E.htm 211207/2.5 All specifications may change without any notification. Ch. de la Rueyre 116 / 1020 Renens / Switzerland Tel +41 21 6326010 / Fax +41 21 6326011 1/1 www.fiveco.ch [email protected]
