Download Specification summary - Sandvik Mining and Construction

Specification Summary
Sandvik UD210
General information
The UD210 Classic type; is a complete crushing plant (primary and secondary crushing and screening)
fully assembled on a single trailer frame.
The UD210 consists basically of a
• MV-35080 vibrating grizzly feeder
• CJ408 crusher
• CH420 crusher
• BS 5’x12’ TD vibrating screen
• Scorpion looping belt conveyor 900 mm (36”) x 14 m.
• The feed hopper sides and end wall are mechanical foldable.
• Frequency inverter for feeder speed control, to provide step less regulation of the feed rate.
• The crusher by-pass chute collects material which passes through the vibrating feeder’s grizzly
section.
Underneath the screen, there are two reversible conveyors allowing combining or separating fines.
• Sandvik UD210 is designed to produce up to four different fractions.
• Six legs and a rear support stabilise the plant in its working position...
• A platform with handrails and stepladder is provided above the jawcrusher.
• Foldable platforms with handrails and access ladders are fitted for easy access and service.
• Liners for discharge chutes (rubber in the N.F & undersize chutes, steel in the rest).
• Self-contained electrical switchgear cabinet on board for power distribution to all of the motors on
•
•
•
•
board the unit. The free-standing control panel cabinet is placed on the ground during operation
(transported on board the unit). Included: remote control box for local control of the feeder speed.
The electric system and instalation are following EU standard.
Emergency stop push buttons are provided at appropriate places.
A siren is fitted to give aural warning of operation.
The design and manufacture of the UD210 plant complies with ISO 9001.
SANDVIK UD210
• An excellent feed to the screen is obtained by the patented Scorpion loop conveyor.
• It is possible to have two screen cloths with different separations at the bottom deck of the screen.
08-02
Specification Summary
Dimension
Operation
Height
Width
Lenght
4.65m
3.95m
16.16m
Transport
Height
Width
Lenght
4.00m
2,49m /
16,16
Weight
tons
44,5
(excluding options)
Feed station
Feeder type
Grizzly length
Hopper
Screen type
Drive
MV-35080 Vibrating Grizzly Feeder1,20 m
12 m3
Screendeck in the Feeder
2 x 2,7kW electric motor
Crusher
Typ
Feed opening
Drive
Type
Drive
Sandvik CJ408
800x600mm
55kW,985 rpm, squirrel-cage type.
Sandvik CH420 EC
90kW 1470 rpm, squirrel-cage type.
Product screen
Screen type:
Deck
Drive
BS 1,5 x 3,7m (5´x 12´) vibrating screen
3-deck
2 x 7,5 kW electric motor,
squirrel-cage type
Loop conveyor
Belt width
Belt length
Drive
900 mm
14 m
11 kW electric motor.
SANDVIK UD210
Power system
08-02
All-electric, intended for connection to a main supply or a
diesel generatorset (not supplied)
Supply voltage
440V/50 Hz or 380V/60 Hz/3-phase a.c
Control voltage
220V/50 Hz or 110V/60 Hz/1-phase a.c
Diesel generator
A supplying Diesel generator has to bee on
400 kWA
Runing Gear
King-pin 2”, Leaf-sprung three-axle bogie, with
airbrakers and running lights
Performance
Max.feed size
•CJ408
•CH420 EC
Capacity (up to)
500 mm
130 mm
140 mtph