* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Diffraction limited resolution - X-ray and Observational Astronomy
Survey
Document related concepts
Vibrational analysis with scanning probe microscopy wikipedia , lookup
Optical coherence tomography wikipedia , lookup
Nonimaging optics wikipedia , lookup
Image intensifier wikipedia , lookup
Night vision device wikipedia , lookup
Diffraction topography wikipedia , lookup
Diffraction grating wikipedia , lookup
Confocal microscopy wikipedia , lookup
Optical aberration wikipedia , lookup
Super-resolution microscopy wikipedia , lookup
Transcript
DEPARTMENT OF PHYSICS AND ASTRONOMY 3671 Multi-Wavelength Astronomy Lecture 3: Telescopes Dr Matt Burleigh In this lecture we will cover: • Design of modern, large optical (& IR) telescopes • Diffraction limited resolution Qmin=1.22l/D • Influence of atmosphere – “seeing” • Adaptive optics – Overcoming “seeing” • Magnification and plate scale Dr. Matt Burleigh 8m Gemini North on Hawaii • Opened early 2001 Dr. Matt Burleigh 8m Gemini North on Hawaii • Opened early 2001 Dr. Matt Burleigh Diffraction limited resolution • A fundamental limit exists in our ability to resolve objects • This limit arises by diffraction • Consider a single slit width D • Any ray passing through this aperture and arriving at a specific point in the focal plane is associated with another ray passing through the aperture one half slit width away and arriving at the same point. Dr. Matt Burleigh Diffraction limited resolution • If the two rays are one-half wavelength (l/2) out of phase, destructive interference occurs: – (D/2) sin q = l/2 – Or sin q = l/D • Now consider dividing the aperture into four equal segments • A ray from the edge of the opening pairs up with one passing through a point one-quarter of a slit width away • For destructive interference to occur: – (D/4) sin q = l/2 – Or sin q = 2l/D • This analysis may be continued by considering dividing the aperture into 6 segments, then 8, 10 etc • In general, for minima to occur as a result of destructive interference from light passing through a single slit – Sin q = m l/D – Where m = 1, 2, 3 … for dark fringes Dr. Matt Burleigh Diffraction limited resolution • The analysis for light passing through a circular aperture like a telescope is more complex • Due to the symmetry of the problem, the diffraction pattern appears as concentric rings: Dr. Matt Burleigh Diffraction limited resolution • The solution to this problem was first obtained in 1835 by Sir George Airy • The central bright spot is known as an Airy Disk, the rings as Airy Rings • A similar equation to our ideal slit describes the location of diffraction minima, but m is no longer an integer Ring m Imax / I0 Central max 0.00 1.00 First min 1.22 2nd max 1.635 2nd min 2.233 3rd max 2.679 Dr. Matt Burleigh 0.0175 0.0042 Diffraction limited resolution • When the diffraction patterns of two sources are sufficiently close together, the diffraction rings are no longer distinguished • The two images are said to be unresolved when the central max of one image falls inside the first minimum of the other • This arbitrary resolution condition is called the Rayleigh Criterion • Assuming qmin is quite small, and invoking the small angle approximation: qmin = 1.22 l / D • q in radians • note to convert radians to arcsecs x by 206265 • Resolution improves with increasing telescope size and at shorter wavelengths Dr. Matt Burleigh Seeing • Unfortunately, the resolution of ground-based telescopes does not improve without limit as the mirror size increases • This is due to the turbulent nature of the Earth’s atmosphere • Local changes in atmospheric T and density over small distances create regions where the light is refracted in random directions • This causes a point source to become blurred • Since stars are effectively point sources, they twinkle • The quality of the image of a star at a given observing location and time is called “seeing” – A measure of resolution allowed by atmosphere • The best seeing at major observatories like Hawaii & La Palma can be below 0.5 arcseconds Dr. Matt Burleigh Seeing, image size & point spread function • The light from a point source like a star spreads itself across the detector (photographic plate, CCD, etc) in a roughly circular pattern – Obviously in poor conditions or if the object is moving the image can become elongated • This is called the point spread function • A cross-section of the PSF is approximately gaussian • We measure the size of the image (PSF) in arcseconds – – – – – 1 arcsecond = 1/60 arcminute = 1/3600 degree Human eye resolution ~1arcminute Pair of car headlights 100km away ~1arcsecond apart A man on the moon ~1/1000 arcsecond Size of Betelgeuse (red giant star) ~ 1/20 arcsecond Dr. Matt Burleigh Seeing • Betelgeuse seen with the 4m William Herschel Telescope on La Palma in about 1” seeing Dr. Matt Burleigh Choosing an observing site • A steady atmosphere to minimise times of poor seeing • Away from sources of scattered light (ie street lights) and sources of dust (industrial areas, sandy deserts) • For infra-red astronomy, want atmospheric water vapour content as low as possible • Good weather! – Remote site – High altitude – Little rainfall – Atacama, Chile – Oceanic islands – La Palma, Hawaii – Poorer sites: Anglo-Australian Telescope – Best site – Space!! (HST) Dr. Matt Burleigh HST + WFPC 2 • HST / WFPC2 image of a multiple star system including a white dwarf •Aa (solar-like star) – Ab (white dwarf) = 0.4” • Image made in ultraviolet at 170nm • Diffraction limited resolution of HST (2.4m) = 0.02” • In reality, resolution is more like 0.08”. Why? Dr. Matt Burleigh Adaptive optics • Advanced computers and new technologies now allow astronomers to compensate for the effects of seeing in real time • It’s called Adaptive Optics • First AO systems designed by the military for use with spy satellites (and their own ground-based telescopes!) • 1990s declassified material plus efforts within astronomical community has led to AO systems being installed at world’s major observatories • Only now becoming really effective • AO system consists of 3 principle components – A deformable mirror (wavefront corrector) – A wavefront sensor – Control system (real-time computer) Dr. Matt Burleigh Adaptive optics Dr. Matt Burleigh The wave front sensor • Estimates the distortion of the atmosphere along the line-of-sight to the target • Requires a bright source near the target – either a star (Gemini telescopes need stars brighter than 13th mag) – Or a fake star created by a laser – Laser stimulates sodium atoms in a layer at an altitude of about 90km Dr. Matt Burleigh The control system • Calculates the corrections required based on inputs from the wave front sensor • Commands the actuators which deform the mirror • Calculations are performed in submillisecond range to keep up with changing atmosphere Dr. Matt Burleigh The deformable mirror • Piezoelectric actuators deform the mirror • The number of actuators required for near-perfect corrections in the optical is several thousand – unrealistic • AO works best in the IR, where fewer actuators are required Dr. Matt Burleigh Quantifying AO performance • The Freid parameter, r0 – – – – A measure of atmospheric turbulence r0 decreases as turbulence increases Also, r0 is proportional to l**6/5 r0 can be viewed as the size of a telescope that would give the same resolution as the atmospheric seeing • So if seeing = 1”, r0= 10cm in the optical (using l/D) • i.e. r0 = l / seeing in radians – Since r0 l-dependent, then if r0 = 10cm at 550nm it would be 70cm at 3.4 microns in the IR – So it is easier to perform AO in the IR than in the optical Dr. Matt Burleigh Quantifying AO performance • The Strehl ratio R is the ratio of the quality of the image obtained to that of a theoretically perfect point source image (Airy disk) • R is proportional to r0 and R improves (ie the image quality improves) with larger r0 • 0 < R < 1; R=1 is a perfect image – For detection of extra-solar planets, need R>0.9 • As R increases, most of the light is concentrated in the central core and little in the Airy rings • Of course, R is l-dependent – e.g. an AO system that gives an R of say 0.9 in the IR will only give 0.1-0.2 in the visual Dr. Matt Burleigh AO at the USAF Starfire facility Binary Kappa Peg: Uncompensated on 1.5m telescope Dr. Matt Burleigh 756-actuators: 0.3” resolution 3D plot: uncompensated and with full AO (right) AO on Gemini North Globular cluster NGC6934 observed with the 8m Gemini North telescope on Hawaii, in the visible (left) and in the IR (right) with the Hokopu’a AO system Dr. Matt Burleigh Magnification, resolution and plate scale • If F= focal length (mm) and D = diameter of telescope, then focal ratio f=F/D • If q=angular resolution in arcsecs then – Image size s = F tan q or Fq assuming small angles • An increase in focal length increases the scale of a pattern, but not the resolution • Magnification – changes the size of an image • Resolution – necessary to increase D to see more detail • Plate scale – no. of arcsec per mm in image plane – Plate scale dq/ds = 1/F = 206265 / fD – Rem. 206265 arcsecs/radian Dr. Matt Burleigh Telescopes: summary • After this lecture you should know and understand – – – The definition of diffraction limited resolution q = 1.22l/D The limitations imposed by atmospheric seeing Overcoming seeing with Adaptive Optics • Definition of Fried parameter and Strehl ratio – Definitions of image size magnification and plate scale Dr. Matt Burleigh