Download (1c): Pair production is the process, whereby a g ray disappears

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Phase transition wikipedia , lookup

Superconductivity wikipedia , lookup

State of matter wikipedia , lookup

Speed of gravity wikipedia , lookup

Condensed matter physics wikipedia , lookup

History of fluid mechanics wikipedia , lookup

Physics and Star Wars wikipedia , lookup

Transcript
IPhO2001 - theoretical competition
Theoretical Competition
Monday, July 2nd, 2001
Please read this first:
1.
2.
3.
4.
5.
The time available is 5 hours for the theoretical competition.
Use only the pen provided.
Use only the front side of the paper.
Begin each part of the problem on a separate sheet.
For each question, in addition to the blank sheets where you may write, there is an answer form
where you must summarize the results you have obtained. Numerical results should be written
with as many digits as are appropriate to the given data.
6. Write on the blank sheets of paper whatever you consider is required for the solution of the
question. Please use as little text as possible; express yourself primarily in equations, numbers,
figures, and plots.
7. Fill in the boxes at the top of each sheet of paper used by writing your Country No and Country
Code, your student number (Student No), the number of the question (Question No), the
progressive number of each sheet (Page No), and the total number of blank sheets used for each
question (Total No of pages). Write the question number and the section letter of the part you
are answering at the top of each sheet. If you use some blank sheets of paper for notes that you
do not wish to be marked, put a large X across the entire sheet and do not include it in your
numbering.
8. At the end of the exam, arrange all sheets for each problem in the following order;
 answer form
 used sheets in order
 the sheets you do not wish to be marked
 unused sheets and the printed question
Place the papers inside the envelope and leave everything on your desk. You are not allowed to
take any sheets of paper out of the room.
1
IPhO2001 - theoretical competition
Question 1
1a) KLYSTRON
Klystrons are devices used for amplifying very high-frequency signals. A klystron basically consists
of two identical pairs of parallel plates (cavities) separated by a distance b, as shown in the figure.

b

v0
output
cavity
input
cavity
~
phase
shifter
An electron beam with an initial speed v0 traverses the entire system, passing through small holes in
the plates. The high-frequency voltage to be amplified is applied to both pairs of plates with a
certain phase difference (where period T corresponds to 2 phase) between them, producing
horizontal, alternating electric fields in the cavities. The electrons entering the input cavity when the
electric field is to the right are retarded and vice versa, so that the emerging electrons form bunches
at a certain distance. If the output cavity is placed at the bunching point, the electric field in this
cavity will absorb power from the beam provided that its phase is appropriately chosen. Let the
voltage signal be a square wave with period T=1.0x10-9 s, changing between V=0.5 volts. The
initial velocity of the electrons is v0=2.0x106 m/s and the charge to mass ratio is e/m=1.76x1011
C/kg. The distance  is so small that the transit time in the cavities can be neglected. Keeping 4
significant figures, calculate;
a) the distance b, where the electrons bunch. Copy your result onto the answer form. [1.5 pts]
b) the necessary phase difference to be provided by the phase shifter. Copy your result onto the
answer form. [1.0 pts]
1b) INTERMOLECULAR DISTANCE
Let dL and dV represent the average distances between molecules of water in the liquid phase and in
the vapor phase, respectively. Assume that both phases are at 100 C and atmospheric pressure, and
the vapor behaves like an ideal gas. Using the following data, calculate the ratio dV /dL and copy
your result onto the answer form. [2.5 pts]
Density of water in liquid phase: L=1.0x103 kg/m3,
Molar mass of water: M=1.8x10-2 kg/mol
Atmospheric pressure: Pa=1.0x105 N/m2
Gas constant: R=8.3 J/mol. K
Avagadro’s number: NA=6.0x1023 /mol
2
IPhO2001 - theoretical competition
1c) SIMPLE SAWTOOTH SIGNAL GENERATOR
R
A sawtooth voltage waveform V0 can be obtained across
the capacitor C in Fig. 1. R is a variable resistor, Vi is an
ideal battery, and SG is a spark gap consisting of two
electrodes with an adjustable distance between them.
When the voltage across the electrodes exceeds the firing
voltage Vf , the air between the electrodes breaks down,
hence the gap becomes a short circuit and remains so until
the voltage across the gap becomes very small.
+
C
+
-
V0
SG
Vi
Figure 1
a) Draw the voltage waveform V0 versus time t, after the switch is closed. [0.5 pts]
b) What condition must be satisfied in order to have an almost linearly varying sawtooth voltage
waveform V0? Copy your result onto the answer form. [0.2 pts]
c) Provided that this condition is satisfied, derive a simplified expression for the period T of the
waveform. Copy your result onto the answer form. [0.4 pts]
d) What should you vary( R and/or SG ) to change the period only? Copy your result onto the
answer form. [0.2 pts]
e) What should you vary ( R and/or SG ) to change the amplitude only? Copy your result onto the
answer form. [0.2 pts]
V0
f) You are given an additional, adjustable
DC voltage supply. Design and draw a
new circuit indicating the terminals
where you would obtain the voltage
waveform V0 described in Fig. 2. [1.0
pts]
Vf
t
Figure 2
1d) ATOMIC BEAM
An atomic beam is prepared by heating a
collection of atoms to a temperature T and
allowing them to emerge horizontally through
a small hole (of atomic dimensions) of
diameter D in one side of the oven. Estimate
the diameter of the beam after it has traveled a
horizontal length L along its path. The mass of
an atom is M. Copy your result onto the
answer form. [2.5 pts]
Diameter = D
L
Oven at temperature T
Atoms of mass M
3
IPhO2001 - theoretical competition
Question 2
BINARY STAR SYSTEM
a) It is well known that most stars form binary systems. One type of binary system consists of an
ordinary star with mass m0 and radius R, and a more massive, compact neutron star with mass
M, rotating around each other. In all the following ignore the motion of the earth. Observations
of such a binary system reveal the following information:




The maximum angular displacement of the
ordinary star is , whereas that of the neutron
star is  (see Fig. 1).
The time it takes for these maximum
displacements is .
The radiation characteristics of the ordinary star
indicate that its surface temperature is T and the
radiated energy incident on a unit area on earth’s
surface per unit time is P.
The calcium line in this radiation differs from its
normal wavelength 0 by an amount , due
only to the gravitational field of the ordinary
star. (For this calculation the photon can be
considered to have an effective mass of h/c.)
I
II
I
II



Ordinary star
Neutron star
Telescope
Fig. 1
Find an expression for the distance  from earth to this system, only in terms of the observed
quantities and universal constants. Copy your result onto the answer form. [7 pts]
b) Assume that M>>m0, so that the ordinary star is
basically rotating around the neutron star in a
circular orbit of radius r0. Assume that the ordinary
star starts emitting gas toward the neutron star with
a speed v0, relative to the ordinary star (see Fig. 2).
Assuming that the neutron star is the dominant
gravitational force in this problem and neglecting
the orbital changes of the ordinary star find the
distance of closest approach rf shown in Fig. 2.
Copy your result onto the answer form. [3pts]
m0
(dm)
v0
r0
M
rf
Fig. 2
4
IPhO2001 - theoretical competition
Question 3
MAGNETOHYDRODYNAMIC (MHD) GENERATOR
A horizontal rectangular plastic pipe of width w and height h, which closes upon itself, is filled with
mercury of resistivity . An overpressure P is produced by a turbine which drives this fluid with a
constant speed v0. The two opposite vertical walls of a section of the pipe with length L are made of
copper.
Shorting wires
w
h
v
B


z
L
y
y

x
The motion of a real fluid is very complex. To simplify the situation we assume the following:
 Although the fluid is viscous, its speed is uniform over the entire cross section.
 The speed of the fluid is always proportional to the net external force acting upon it.
 The fluid is incompressible.
These walls are electrically shorted externally and a uniform, magnetic field B is applied vertically


upward only in this section. The set up is illustrated in the figure above, with the unit vectors x , y ,

z to be used in the solution.
a) Find the force acting on the fluid due to the magnetic field (in terms of L, B, h, w,  and
the new velocity v) [2.0 pts]
b) Derive an expression for the new speed v of the fluid (in terms of v0, P, L, B and  ) after
the magnetic field is applied. [3.0 pts]
c) Derive an expression for the additional power that must be supplied by the turbine to
increase the speed to its original value v0. Copy your result onto the answer form. [2.0 pts]
d) Now the magnetic field is turned off and mercury is replaced by water flowing with speed
v0. An electromagnetic wave with a single frequency is sent along the section with length L
in the direction of the flow. The refractive index of water is n, and v0 <<c. Derive an
expression for the contribution of the fluid’s motion to the phase difference between the
waves entering and leaving section L. Copy your result onto the answer form. [3.0 pts]
5
IPhO2001 - theoretical competition
Country no
Country code
Student No.
Question No.
Page No.
Total
No. of pages
ANSWER FORM
1A
a)
b=
b)
Phase difference=
1B
dV
=
dL
6
IPhO2001 - theoretical competition
Country no
Country code
Student No.
Question No.
Page No.
Total
No. of pages
1C
b)
c)
T=
d)
e)
1D
New diameter of the beam =
7
IPhO2001 - theoretical competition
Country no
Country code
Student No.
Question No.
Page No.
Total
No. of pages
ANSWER FORM
2a)
=
2b)
rf =
8
IPhO2001 - theoretical competition
Country no
Country code
Student No.
Question No.
Page No.
Total
No. of pages
ANSWER FORM
3a)
3b)
v=
3c)
Power =
3d)
Phase difference =
9