* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download Exercise 14 Wave Motion
Hunting oscillation wikipedia , lookup
Velocity-addition formula wikipedia , lookup
Modified Newtonian dynamics wikipedia , lookup
Classical mechanics wikipedia , lookup
Equations of motion wikipedia , lookup
Newton's theorem of revolving orbits wikipedia , lookup
Coriolis force wikipedia , lookup
Jerk (physics) wikipedia , lookup
Fictitious force wikipedia , lookup
Centrifugal force wikipedia , lookup
Rigid body dynamics wikipedia , lookup
Seismometer wikipedia , lookup
Classical central-force problem wikipedia , lookup
Exercise 3 (Forces and motion) Suggested Solutions 1. (a) (i) v2 = u2 + 2as 152 = 0 + 2 a (75) a = 1.5 m s-2 (ii) There are two forces acting on the helicopter. Refer to the figure. F is the uplifting force and mg is the weight of the helicopter. F – mg = ma F = m(a + g) = 1500 (1.5 + 10) = 17250 N (b) (i) At time t = 0, v = -45 m/s (ii) The area represents the displacement of the object in its upward motion. (iii) Height = area of graph below time axis from t = 3s to 6s. = (15+45) x 3 / 2 = 90 m (iv) Statement 1 is incorrect. The acceleration of the object is always 10 m s-2 downward for the whole journey. At t = 1.5s, the object reaches the highest point, only its velocity is zero but the acceleration is still 10 m s-2 downward. Statement 2 is correct. The acceleration of the heavier object will still be 10 m s-2. 2. (a) (i) (1) Speed at A = length of card / time = 0.03 / 0.05 = 0.6 m s-1. (2) Speed at B = 0.03 / 0.025 = 1.2 m s-1. (ii) (1) By v2 = u2 + 2as 1.22 - 0.62 = 2a (0.4)=> a = 1.35 m s-2. (2) Tension in string T = ma = 1.5 (1.35) = 2.025 N (b) A motion sensor is facing the back of the trolley. The trolley is given a push and runs down the runway. The velocity-time graph obtained is examined. If the runway is friction-compensated, the v-t graph should be a horizontal straight line. (c) The trolley will travel along the runway with a uniform speed. 3. (a) (i) F = ma = 60 x (40/4) = 60 x 10 = 600 N (ii) F = ma = 60 x 0 = 0 N (b) The parachutist opens the parachute at t = 4s because after opening the parachute, the air resistance is greatly increased and greater than his weight, as a result, the net force is upwards, and therefore he starts to decelerate from t = 4s. (c) Distance traveled = area under graph = 4 x 40 /2 = 80 m (d) Distance traveled in t = 10s to t = 15s = 5 x 5 = 25 m Distance required = 205 - 25 - 80 = 100 m (e) (i) F = ma = 60 x (5-0)/0.5 = 600 N (ii) Bending the knee will increase the contact time with the ground. The decrease in velocity on landing is unchanged, independent of whether the knee is bent or not, so increasing the deceleration time would reduce the force acting on the parachutist, causing less damage. 4 (a) normal reaction friction weight (b) (i) (ii) Acceleration of block = = slope of the straight line / 2 4/2 = 2 m s-2 (iii) mg sin θ – f = ma 0.4×10 × sin 30o – f = 0.4 × 2 => f = 1.2 N so frictional force required is 1.2 N 5. (a) a 6 0 20 = 3 m s2 (downwards) (b) A: 380 N B: 510 N C: 614 N In stage B, balance reading = weight, mg = m × 9.81 m s2 = 510 N m = 52.0 kg (c) (i) For stage C, by Newton’s 2nd law, F = ma (510 614) N = (52.0 kg) a a = 2 m s2 Thus, a 0 5 2 m s 2 T 12 T = 12.5 s (ii) Height displacement of lift = area under graph (10 2) 12.5 5 51.3 m 2 weight of container = mg = 22000 × 9.81 = 2.16 × 105 N Tension (= ¼ mg) = 5.40 × 104 N (b) moment(=force×distance)=22000g × 32 = 6.91 × 106 N m (c) The counterweight provides a (sufficiently large) anticlockwise moment (about Q) or moment in opposite direction (to that of the container to prevent the crane toppling clockwise) 6. (a) OR Left hand pillar pulls (down) and provides anticlockwise moment OR The centre of mass of the crane (frame and the counterweight) is between the two pillars which prevents the crane toppling clockwise/to right 7. (a) From t = 0.5 to 1.5s, the block decelerates uniformly. From t = 1.5 to 3.5s, it then moves with uniform acceleration down the plane. (b) (i) a = - (2-0) / (1.5-0.5) = -2 m s-2. (ii) (c) mg sin + f = ma (1)(9.81)sin + f = (1)(2) ----(1) Moving downward: mg sin - f = ma (1)(9.81)sin - f = (1)(0.5) ----(2) On solving, we have 2f = 1.5 f = 0.75 N (d) Moving upward : 8. (a) (i) From t = 0 to 2 s, it moves in uniform speed From t 2.0 to 2.5 s, it decelerates uniformly to zero. (ii) Air cushion cannot support the weight and the puck touches the ground. Friction causes the deceleration. (iii) Distance = area under the graph = (2+2.5) x 1.5 / 2 = 3.38 m (b) 20 = 0.4 m s–2 24 12 14 (b) For the 12 kg block, 9. (a) a= 20 – T1 = 12 0.4 T1 = 15.2 N (c) For the 24 kg block, T2 = 24 0.4 = 9.6 N The tension in string 1 is larger than that in string 2. (d) Train compartments are similar to this system. MC 1-5 D D B C C 21-25 B B C C C 6-10 B D B A E 26-27 A D C 11-15 B B A A D 16-20 D D C D E 1. The weight does not vary even the object is inside an accelerating lift. Only the apparent weight varies. 2. For 2 kg mass, 6 – T = 2a For 3 kg mass, T = 3a Solving the above equations, a = 1.2 m s-2, T = 3(1.2) = 3.6 N 3. By inertia, the velocity of the stone at the moment of release is 10 m s-1 upwards. 4. If the apparent weight is reduced, R < mg, so the net force is downward, hence the acceleration must be downward. Both (2) and (3) have acceleration directed downward. 5. When the force is 10 N, the block travels with constant velocity, this implies that the frictional force must be also 10 N. When the external force is 14 N, F = ma 14 – 10 = 2 a => a = 2 m s-2. 6. When the car is moving down the inclined plane with constant velocity, friction acts upward (the plane forms a friction-compensated runway). The net force is zero. So friction f = mg sin When the car is moving up the inclined plane with constant velocity, friction acts downward. The net force is again zero. So external force required = mg sin + friction = 2 mg sin = 2 (0.5)(10) sin 20o = 3.4 N 7. Moving downwards with deceleration means that acceleration is upward. Hence, normal reaction > weight. 8. (1) is wrong. The friction is mg sin , not zero. (2) is wrong. When the trolley runs upward, the friction acts up the incline and is impossible to balance the friction by mg sin . 10. When the block is moving upwards, net force = friction + mg sin = ma ---(1) When the block is moving downwards, net force = mg sin - friction = ma’ ---(2) From (1) and (2), it can be concluded that a’ < a So upward deceleration (velocity positive) < downward acceleration (velocity negative). The answer is E. 11. The ball will not press on the wall, otherwise, if the surface of the ground is smooth, the ball will move to LHS by reaction. So the only forces acting on the ball are weight and normal reaction. 12. Acceleration a = F / m = 2 / 2 = 1 m s-2. After 2 seconds, the force is removed and by Newton’s first law, the object will travel with constant velocity v given by v = u + at = 2 + 1 (2) = 4 m s-1. 13. Treat the F direction as x-axis. Then the tension is vertical direction. Consider equilibrium in x-direction, F = 20 sin 25o = 8.45 N 15. Refer to Newton’s first law. 16. Mass is a measure of inertia. 17. After cancellation, there are only 3 net forces, each of 3 N, one is in OD direction, one is in OE direction, and one is in OF direction. Resultant force between the force in OE and OF = 2 x 3 cos 30o = 3 3 Thus resultant force = 32 3 3 2 6N 18. For friction-compensated runway, mg sin = friction Hence, net force = F + mg sin - friction = ma => F = ma => a 1 F m A plot of a against F is a straight with slope = 1/m If the runway is inclined at a greater angle ’, then mg sin ’ > friction net force = F + mg sin ’ – friction = F + F = ma where F = mg sin ’ – friction = positive value a 1 F F m m A plot of a against F will be a straight line with slope = (1/m) and positive intercept F / m 19. Resolving components in horizontal and vertical direction. In horizontal direction, horizontal component of F1 + horizontal component of F2 = 2 + 2 = 4 N In vertical direction, vertical component of F1 + vertical component of F2 = 3 + (-1) = 2 N Resultant = 20. 4 2 2 2 4.47 N 2 3 4 0 => 3 4 2 21. Taking moments about A, moment produced by weight of plank + moment produced by boy’s weight = moment produced by RB 100 x 0.6 + 400 x 0.9 = RB x 1.2 RB = 350 N RA + RB = 100 + 400 => RA = 150 N 22. Taking moments about Y, at the point of tilting, RX = 0 clockwise moment = anticlockwise moment 450 x 2.5 = (675 + 6n) x 1.5 where n is the no. of weights in the basket n = 12.5 Thus the maximum number of weights that can carry without tilting is 12. 23. Taking moments about P, F x 40 = 200 x 5 F = 25 N 24. F1 – T = ma T – F2 = 2ma On solving, T = 2F1 F2 3 26. Friction must be 12-2 = 10 N At the instant the 12 N force is removed, the net force acting on the block is 2 + 10 = 12 N 27. Taking moments about P, T sin 45o (1.5) = Mg (1) T = 0.943 Mg After the gangplank is raised, its center of gravity is closer to P, hence the moment arm is shorter (i.e., less than 1 m, thus T is decreased