Download Primary Switch Mode Power Supply MINI-PS-120-230 AC

Primary Switch Mode Power Supply
MINI-PS-120-230 AC/24DC/0.65
MINI POWER provides:
• Extra narrow widths of 22.5 and 45 mm (0.886 and
1.772 in.)
• Global use due to a wide range input
• A high level of operational safety in complex global
networks
• Reliable start up of heavy loads due to POWER
BOOST
The reliability of a power supply determines the
availability of individual components in a system and
whether complex systems can function safely.
The globalization of markets increases the demands
placed on the power supply. A wide range input and a
high level of availability are required. These
requirements are met by MINI POWER.
1. Brief Description
MINI POWER is the extra narrow power supply,
which is available in widths of 22.5 and 45 mm (0.886
and 1.772 in.).
In addition to a 24 V version with output currents of
0.65 A and 2 A, special voltages are also available with
5 V/3 A and +/- 15 V/1 A.
The devices have a power reserve of 100%. At
ambient temperatures of up to +30°C (+86˚F) a
MINI POWER 650 mA can thus continuously supply a
current of 1200 mA at 24 V DC. At ambient
temperatures of up to +60°C (+140˚F) this current is
provided for several minutes.
The high level of operational safety is also ensured in
complex global networks. MINI POWER also operates
in applications where static voltage dips, transient
power supply failures or phase failure are common.
Large capacitors ensure mains buffering of more
than 20 ms at full load.
2. Area of Application
MINI POWER can be used globally due to the
consistent conversion of a wide range input.
In this way, your entire system can be tested at any
production location in the world and can be delivered to
any location in the world without faulty switching of the
input voltage. This reduces storage costs and logistical
effort.
An international approval package including
UL 60950 for IT equipment and UL 508 for industrial
control equipment enables the device to be used
globally.
Headquarters: © Phoenix Contact GmbH & Co.KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany
Phone +49 - 52 35 - 3 00 • Fax +49 - 52 35 - 34 12 00 • www.phoenixcontact.com
Local Contact: www.phoenixcontact.com/salesnetwork
Primary Switch Mode Power Supply MINI-PS-120-230 AC/24DC/0.65
3. Technical Data
114,5
OUT
IN
1
9
0
!
"
NC
NC
N (–)
4
99
L (+)
§
$
%
&
22,5
MINI-PS-120-230 AC/24DC/0.65
Primary switch mode power supply
8
M3
rigid
Connection data
[mm2]
0.2-2.5
flexible
Housing width 22.5 mm (0.886 in.)
AWG
0.2-2.5
24-14
Description
Type
Order No.
Power supply,
primary switch mode
MINI-PS-120-230AC/24DC/0.65
29 38 49 7
Pcs.
Pkt.
1
Technical Data
Input Data
Input voltage
120-230 V AC
100-250 V DC
85-264 V AC
90-350 V DC
47-63 Hz
< 10 A (< 1 ms)
0.2/0.4 A (230/120 V AC)
> 0.5
> 30 ms (120 V AC)
> 100 ms (230 V AC)
Varistor
Input voltage range
Frequency
Inrush current surge at 25°C (77˚F)
Current consumption at nominal input voltage
Power factor
Mains buffering
Transient surge protection
Output Data
Nominal output voltage/current
Tolerance
Setting range
Startup delay
Switching on after applying the line voltage
Internal surge protection
Function indicator
Can be connected in parallel
System deviation on load change
Response time Uout (10-90%)
Residual ripple/switching peaks
Maximum power loss
No load
Nominal load
No load
Nominal load
General Data
Electrical safety (of IT equipment)
Industrial control equipment
Equipping high voltage installations with electronic equipment
Safety extra-low voltage
Safe isolation
Protection against electric shock
Protection against dangerous shock currents, basic requirements for
safe isolation in electrical equipment
Limitation of harmonic line currents
24 V DC/0.65 A
-0%/+3%
Fixed voltage
< 400 ms
0.5 s (230 V AC)/< 1 s (120 V AC)
Yes, 33 V DC ±5%
LED
Yes, to create redundant systems
< 1% (static 10-90%)
< 2% (dynamic 10-90%)
< 150 ms
20 mVpp, typical
20 mVpp, typical
2.2 W
3.2 W
EN 60950/VDE 0805, u UL1950 recognized
U UL 508 listed (approved by UL for USA and Canada)
EN 50 178 (VDE 0160)
PELV (EN 50 178)
SELV (EN 60 950)
VDE 0100-410
DIN 57100-410
DIN VDE 0106-101
Application of EN 6100-3-2 is not required
(active power < 75 W)
Continued on page 3
PHOENIX CONTACT page 2 of 5
Primary Switch Mode Power Supply MINI-PS-120-230 AC/24DC/0.65
Isolation voltage input/output
Mounting position
3 kV (4 kV type test)
Horizontal NS 35 DIN rail in accordance with EN 50022
Can be mounted:
Vertical spacing of > 10 cm (3.937 in.)
Horizontal with no spacing
COMBICON/0.2-2.5 mm2/rigid/flexible (24-14 AWG)
IP 20
II
> 500 000 h in accordance with IEC 1709 (SN 29 500)
> 80%
0.14 kg, approximately
22.5 x 99 x 114.5 (0.886 x 3.898 x 4.508 in.)
Mounting
Connection type/cross-section
Degree of protection
Protection class
MTBF
Efficiency
Weight
Approximate dimensions (W x H x D) in mm
Climatic Data
Ambient temperature
-25°C to +60°C (-13˚F to +140˚F) (UL to +50°C [122˚F])
-40°C to +85°C (-40˚F to 185˚F)
95% at 25°C (77˚F)
10 Hz-150 Hz, 0.15 mm (0.006 in.) or 2 g
30 g for 18 ms in 3 space directions
2
Humidity, no condensation
Vibration in accordance with IEC 68-2-6
Shock in accordance with IEC 68-2-27
Degree of pollution in accordance with EN 50 178
c
Conforms to the EMC Directive 89/336/EEC and the
Low Voltage Directive 73/23/EEC
Noise immunity in acc. with EN 61000-6-2:
Tests
Standard limit values:
Requirements
in acc. with EN 61000-6-2
Product limit values:
Requirements
for Phoenix Contact
Electrostatic discharge (ESD)
EN 61000-4-22)
Contact discharge (4 kV)
Air discharge (8 kV)
> Level 2
Contact discharge (6 kV)
Air discharge (8 kV)
Corresponds to level 3
Electromagnetic HF field
EN 61000-4-31)
Frequency: 80-1000 MHz
Field strength: 10 V/m
Corresponds to level 3
Frequency: 26-1000 MHz
Field strength: 10 V/m
> Level 3
Fast transients
(burst)
EN 61000-4-42)
ACin cables
(2 kV) asymmetrical4)
Corresponds to level 3
ACin cables
(2 kV) symmetrical3)
(4 kV) asymmetrical4)
Corresponds to level 4
DCout cables
(2 kV) asymmetrical4)
Surge voltages/surge
EN 61000-4-52)
ACin cables
(1 kV) symmetrical3)
Corresponds to level 2
ACin cables
(1 kV) symmetrical3)
Corresponds to level 2
Conducted interference
EN 61000-4-61)
Field strength: 10 V/m
Frequency: 0.15-80 MHz
Corresponds to level 3
Field strength: 10 V/m
Frequency: 0.15-80 MHz
Corresponds to level 3
Voltage dips
EN 61000-4-112)
30% reduction of the input voltage
for 0.5 periods
See input data:
Mains buffering
> 30 ms
Simulation of mobile/radio phones
EN 50204
Not required in EN 61000-6-2
Field strength: 20 V/m
Frequency: 900 MHz,
1800 MHz ±5 MHz
EN 55011
Class A5)
Class B6)
EN 55011
5)
Class B6)
Noise emission in acc. with EN 50081-2:
Radio interference emission
Radio interference emission
Class A
EN 55011 corresponds to CISPR11/EN 55022 corresponds to CISPR22
EN 61000 corresponds to IEC 1000
3)
symmetrical:
4)
1)
5)
Class
6)
Criterion A: Normal operating characteristics within the specified
limits.
2)Criterion B: Temporary adverse effects on the operating
characteristics that the device corrects independently.
Cable to cable
asymmetrical: Cable to earth
A:
Class B:
Industrial application
Industrial and domestic applications
PHOENIX CONTACT page 3 of 5
Primary Switch Mode Power Supply MINI-PS-120-230 AC/24DC/0.65
4. Connection and Operating Instructions Mounting Instructions
Caution: Never carry out work
when power is present. Danger to life.
Attention: When the device is opened,
a dangerous voltage may remain at the
electrolytic capacitors for up to 2 minutes after
shutdown.
4.1. Rail Mounting
The power supply can be snapped onto all DIN rails
in accordance with EN 50022-35.
Installation must be carried out correctly
in accordance with the specifications of
EN 60950.
For vertical installations we recommend a
minimum spacing of 10 cm (3.937 in.) between
other modules and this power supply to ensure
sufficient convection.
No minimum spacing is required for horizontal
mounting.
The line feeder must meet an appropriate
specification or strain relief outside the device.
4.2. Cable Connection
The device is equipped with COMBICON
connectors.
This user-friendly connection method enables quick
device replacement and safe isolation of the electrical
connection.
Installation on the line side and connection using
screw-clamp terminals should be carried out
properly to ensure protection against electric
shocks.
Connection Cable:
The following cable diameters can be used:
0.2-2.5 mm2 rigid/flexible (24-14 AWG).
To maintain the UL, use copper cables, which are
designed for operating temperatures of 75°C (167˚F).
For reliable and safe contacts, strip the connector
ends (8 mm [0.315 in.]/Figure 06).
AC/DC cable connection
+)
L(
IN
C
N
12
0–
23
C
N
0V
30
R
E
W
O
P
-2
20
S1
I-P
N
MI
AC
)
(N
1
8 mm (0.315 in.)
2
3
Fig. 06
4
I-P
N
MIN
t.Ar
Input:
The 120-230 V AC or 100-250 V DC connection is
made using screw connections "L(+)" and "N(-)"
(torque 0.5 Nm) at the COMBICON connection
(Fig. 04).
The Power o.k. indicator displays the function of the
device.
5
6
7
IN
8
12
0–
23
AC
0V
Fig. 04
Output:
The 24 V DC connection is made using the "+" and
"–" screw connections (torque 0.5 Nm) at the
COMBICON connection (Fig. 0.5).
–
–
T
24V
DC
+
+
/
DC
/24
C
0A
23
+
–
5
0.6
+
R
E
W
O
P
Secondary Side: The device is electronic short-circuitproof and idling-proof. In the event of an error, the
output voltage is limited to a maximum of 33 V ±5%.
OU
–
4.3. Fuse Protection
The device must be installed in accordance with the
specifications of EN 60950. It must be possible to
switch off the device using a suitable disconnecting
device outside the power supply. For example, primary
side line protection could be used. A suitable fuse
must be fitted for DC applications.
DC cable connection
5
/0.6
DC
/247
C
30A 49
0-2 8
-12 3
PS.: 29
IMIN-Nr
t.
Ar
UT
Fig. 05
PHOENIX CONTACT page 4 of 5
Primary Switch Mode Power Supply MINI-PS-120-230 AC/24DC/0.65
4.4. Redundancy Operation
These devices can only be connected in parallel for
redundancy operation.
If a fault occurs in the primary circuit of device
number no. 1, device no. 2 automatically takes over the
complete power supply without interruption and vice
versa (Fig. 07).
Redundancy operation
L1
L2
N
L N
5. Characteristic Curve
+
–
L N
1
+
–
2
5.1. Temperature Response
The device supplies a nominal current IN of 650 mA
at ambient temperatures up to 60°C (140˚F).
+
5.2. Short Circuit/Overload
The device output is electronically protected from
overloads and short circuits.
At an ambient temperature of < 30°C (86˚F) the
output current is permanently greater than IN:
Maximum Output Current
at Tamb < 30°C (86˚F)
120 V AC
230 V AC
110 V DC
220 V DC
0.95 A, typical
1.20 A, typical
0.80 A, typical
1.00 A, typical
Fig. 07
Output characteristic curve
UOUT
[V]
In the event of an extreme overload or short circuit,
the working point demonstrates the curve shown in Fig.
08, the device shuts down and attempts to switch on
again until the short circuit on the secondary side is
removed.
< 60 °C
< 30 °C
24
0.95
1.2
IOUT
[A]
IN = 0.65
Fig. 08
 PHOENIX CONTACT
August 15, 2002
TNR: 5105861-02
UIN = 230 V AC
UIN = 120 V AC
http://www.phoenixcontact.com
Input Voltage
UIN
–
PHOENIX CONTACT page 5 of 5