Download Qualified Electrical Worker Test

Qualified Electrical Worker Test
Name _____________________
Crew _____________________
A. Fuse handling equipment, _______________________________ , shall be used to
remove or install fuses when the fuse terminals are energized.
1.
such as pliers or screwdrivers
2.
insulated for circuit voltage
3.
or electrical tester probes
B. Portable ladders shall ______________________ if they are used where the employee or
the ladder could contact exposed energized parts.
1.
have nonconductive siderails
2.
have no metal parts
3.
be a minimum of three feet higher than the electrical panel
C. Application of locks and tags. (A) A lock and tag shall be placed on each ___________
_____ used to deenergize circuits and equipment on which work is to be performed, except
as provided in paragraphs (b) (2) (iii) (C) and (b) (2) (iii) (E) of this section. The lock shall be
attached so as to prevent persons from operating the ___________ _____ unless they resort
to undue force or the use of tools.
Same answer for both blanks
1.
the front of the panel
2.
disconnecting means
3.
doorway or gate
Reenergizing equipment. These requirements shall be met, in the order given, before circuits
or equipment are reenergized, even temporarily.
D. (b) (2) (v) (A) A qualified person shall _____________________________, as
necessary, to verify that all tools, electrical jumpers, shorts, grounds, and other such devices
have been removed, so that the circuits and equipment can be safely energized.
1.
call out to the nearest staff
2.
make all repairs to the equipment
3.
conduct tests and visual inspections
E. (b) (2) (v) (B) Employees exposed to the hazards associated with reenergizing the circuit
or equipment shall ______________________________________.
1.
always wear rubber gloves
2.
all be qualified electrical workers
3.
be warned to stay clear of circuits and equipment
F. A qualified person shall use _____________ to test the circuit elements and electrical
parts of equipment to which employees will be exposed and equipment parts are
deenergized.
1.
test equipment
2.
two fingers
3.
a visual test to see if the equipment is running
05/13/17
BONUS Stored electric energy which might endanger personnel shall be released.
Capacitors shall be discharged and high capacitance elements shall be short-circuited and
grounded, if the stored electric energy might endanger personnel.
NOTE: If the capacitors or associated equipment are handled in meeting this requirement,
they shall be treated as energized.
List one method of determining if the circuit you are working on has a capacitor?
_____________________________________________________________
What does a typical one look like?
_____________________________________________________________
How do you discharge a capacitor safely?
_____________________________________________________________
05/13/17