Download Modular LED light engine for exterior light fixtures

www.sylvania.com/LED
Exterior Light Engine
Modular LED light engine for exterior light fixtures
Key Features & Benefits
•Stand-alone light engine can be combined with a number of
housings and optics; making it
easy to use in a variety of
applications
•Comes pre-wired to simplify the
installation process
•Reverse voltage protection prevents damage to LEDs that
can result from incorrect wiring
The Exterior Light Engine (ELE) is available with seven or fourteen
high-brightness LEDs on a metal core board (MCB). Available in
3500K, 4100K and 5800K, the ELE is available in different drive
currents, producing a variety of lumen outputs.
Conformal coating provides protection against dust, moisture and
condensation allowing the ELE to be combined with a variety of
housings and optics, making the light engine easy to use in a variety of applications. The ELE is optimally paired with OPTOTRONIC®
24Vdc power supplies.
• Area lighting
• Street lighting
LED123R1 4/11
•Conformally coated to protect
against dust, moisture and condensation
•Long life: up to 50,000 hours
(L70) when temperature at
Tc point is maintained at or below 85°C minimizing
maintenance frequency
Product Offering
Ordering Abbreviation
CL/7/W4F-735 275mA
CL/7/W4F-741 275mA
CL/7/W4F-758 275mA
CL/7/W4F-735 444mA
CL/7/W4F-741 444mA
CL/7/W4F-758 444mA
CL/14/W4F-735 667mA
CL/14/W4F-741 667mA
CL/14/W4F-758 667mA
CL/14/W4F-735 888mA
CL/14/W4F-741 888mA
CL/14/W4F-758 888mA
Application Information
Applications
•Bi-level dimming is available on light engines containing 14 LEDs
Specifications and Certifications
Wattage
6.6
6.6
6.6
12
12
12
16
16
16
21.3
21.3
21.3
Color
3500K
4100K
5800K
3500K
4100K
5800K
3500K
4100K
5800K
3500K
4100K
5800K
Specification Data
Catalog #
Type
Project
Comments
Prepared by
Date
Ordering Information
Item Number
70476
71249
71268
70477
71258
71269
70478
71259
71270
70479
71260
71271
Ordering
Abbreviation Dimensions CL/7/W4F-735 275mA
2.952" x 2.952"
CL/7/W4F-741 275mA
2.952" x 2.952"
CL/7/W4F-758 275mA
2.952" x 2.952"
CL/7/W4F-735 444mA
2.952" x 2.952"
CL/7/W4F-741 444mA
2.952" x 2.952"
CL/7/W4F-758 444mA
2.952" x 2.952"
CL/14/W4F-735 667mA
2.952" x 2.952"
CL/14/W4F-741 667mA
2.952" x 2.952"
CL/14/W4F-758 667mA
2.952" x 2.952"
CL/14/W4F-735 888mA
2.952" x 2.952"
CL/14/W4F-741 888mA
2.952" x 2.952"
CL/14/W4F-758 888mA
2.952" x 2.952"
No. of
LEDs 7
7
7
7
7
7
14
14
14
14
14
14
Power
(W)* 6.6
6.6
6.6
12
12
12
16
16
16
21.3
21.3
21.3
Voltage
(Vdc) 24
24
24
24
24
24
24
24
24
24
24
24
Current*
(mA) 275
275
275
444
444
444
667
667
667
888
888
888
Color
Temperature**
3500K
4100K
5800K
3500K
4100K
5800K
3500K
4100K
5800K
3500K
4100K
5800K
Initial*
Lumens (lm) 371
428
585
675
779
1064
899
1037
1417
1198
1383
1890
LPW
56
65
89
56
65
89
56
65
89
56
65
89
All data reflects statistical averages for a bare module at 25°C. Actual data may differ depending on variances in the manufacturing process.
*To determine values for bi-level dimming in 14-LED modules, divide by 2.
** Values based on instant on testing.
Note: Product weight: 7 LED modules = 40g; 14 LED modules = 45g.
Ordering Guide
CL
/
14
/
W4F
–
7
Module name
Number White 4th Generation
CRI>70
of LEDs
Fine Bin
35
Color
Temperature
3500K
275mA
Current
Power Supply Information
Max. Number of Modules per Power Supply
Item Number
Description
70476, 71249, 71268
CL/7/W4F-7XX 275mA
70477, 71258, 71269
CL/7/W4F-7XX 444mA
70478, 71259, 71270
CL/14/W4F-7XX 667mA
70479, 71260, 71271
CL/14/W4F-7XX 888mA
OT17
(51622)
2
1
1
0
OT20
(51512)
3
1
1
0
OT30
(51521)
4
2
1
1
OT50
(51598)
7
4
3
2
* NAED #51626 has replaced NAED #51511
** NAED #51627 has replaced NAED #51515
Note:
1. Power supply loading information for OT240 is for one channel only. OT240 has three 80W Channels.
Minimum and Maximum Ratings
Parameter
Operating Temperature at Tc point
Storage Temperature Range
Voltage Range
Maximum Reverse Voltage
Values
-30°C to + 85°C (-22°F to +185°F)
-30°C to + 90°C (-22°F to +194°F)
23 – 25Vdc
25Vdc, 2A maximum reverse current
OT75
(51514)
11
6
4
3
OT96
(51626*)
14
8
6
4
OT2401
(51627**)
12
6
5
3
Assembly Diagram
Wiring Diagram
Safety Information
WARNING: ONLY QUALIFIED PERSONNEL SHOULD PERFORM INSTALLATION.
TO AVOID ELECTRICAL SHOCK OR COMPONENT DAMAGE, DISCONNECT POWER BEFORE
ATTEMPTING INSTALLATION OF THE POWER SUPPLIES AND/OR MODULES.
Failure to install the power supplies and/or LED modules in accordance with the National Electric Code (NEC), all
applicable Federal, State and local electric codes as well as the specific Underwriters Laboratories (UL) safety
standards for the installation, location and application may cause serious personal injury, death, property damage
and/or product malfunction.
Warranty
SYLVANIA LED products are covered by our
LED Module, OPTOTRONIC® Power Supply
or Control Warranty.
The ELE is covered under warranty as long as
the temperature at the Tc point does not
exceed 85˚C; exceeding this temperature will
void all warranties.
For additional information, refer to the latest
version of the warranty at www.sylvania.com.
1. The LED module itself and all its components shall not be subjected to mechanical stress and assembly
must not damage or destroy conducting paths on the circuit board.
2. Ensure the power supply is of adequate power to operate the total load.
3. Electrostatic Discharge (ESD) precautions shall be incorporated when handling or installing the module
(For more information, reference document # LED093 ESD Protection for LED Systems.)
4. Modules may be hot to the touch. Use caution when handling.
5. Damage by corrosion and improper heat sinking will not be honored as a materials defect claim. It is the
user’s responsibility to ensure adequate heat sink and protection against corrosive agents such as moisture,
condensation and other harmful elements.
6. Circuit boards should be attached securely to the intended substrate, but do not over-tighten screws or rivets.
Heavy vibration should be avoided.
7. The module itself is protected against condensation (water) with a polymeric conformal coating.
Supplementary soldering on any solder pad will destroy the conformal coating and with it protection
against water.
8. Avoid looking directly into the light beam as the high brightness may damage eyes.
Assembly Information
1. The LED module is not intended for use with constant current power supplies.
2. Observe correct electrical polarity, incorrect polarity may destroy the module.
4. Multiple modules must be connected to power supply using parallel connections. Bi-Level dimming is
achievable with modules having 14 LEDs by using a third party switching unit on the secondary (DC)
circuit. Refer to wiring diagram for details.
United States
OSRAM SYLVANIA
100 Endicott Street
Danvers, MA 01923
Trade
Phone:
Fax:
1-800-255-5042
1-800-255-5043
National Accounts
Phone:
1-800-562-4671
Fax:
1-800-562-4674
OEM/Special Markets
Phone:
1-800-762-7191
Fax:
1-800-762-7192
Display/Optic
Phone:
1-888-677-2627
Fax:
1-800-762-7192
Canada
OSRAM SYLVANIA LTD.
2001 Drew Road
Mississauga, ON L5S 1S4
Trade
Phone:
Fax:
SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc.
SEE THE WORLD IN A NEW LIGHT is a registered trademark of OSRAM SYLVANIA Inc.
OPTOTRONIC is a registered trademark of OSRAM GmbH.
Specifications subject to change without notice.
1-800-263-2852
1-800-667-6772
OEM/Special Markets/Display/Optic
Phone:
1-800-265-2852
Fax:
1-800-667-6772
www.sylvania.com
© 2011 OSRAM SYLVANIA 4/11 Photography 3. To achieve a service life of 50,000 hours (L70), adequate heatsinking is required to maintain a Tc point
temperature of 85°C during operation.