Download 60KB - Nitek

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Camcorder wikipedia , lookup

FTA receiver wikipedia , lookup

Videocassette recorder wikipedia , lookup

Rectiverter wikipedia , lookup

Radio transmitter design wikipedia , lookup

Telecommunications engineering wikipedia , lookup

Interlaced video wikipedia , lookup

Serial digital interface wikipedia , lookup

Home cinema wikipedia , lookup

Active electronically scanned array wikipedia , lookup

Broadcast television systems wikipedia , lookup

Television standards conversion wikipedia , lookup

Regenerative circuit wikipedia , lookup

Analog television wikipedia , lookup

HD-MAC wikipedia , lookup

Transcript
UNSHIELDED TWISTED PAIR ACTIVE VIDEO RECEIVER – TYPE TR560
TECHNICAL SPECIFICATIONS
SECURITY SYSTEM
DIVISION 16 – ELECTRICAL
SECTION 16 _ _ _ - CLOSED CIRCUIT TELEVISION (CCTV) SYSTEM
PART 2 – PRODUCTS
2.1 GENERAL
2.1.1 All equipment to be supplied under this specification shall be new and the current
model of a standard product of an OEM of record. An OEM of record shall be
defined a a company whose main occupation is the manufacture for sale of the
equipment supplied and which:
A. Maintains a factory production line for the item submitted.
B. Maintains a stock of replacement parts for the item submitted..
C. Maintains engineering drawings, specifications, and operating manuals for
the items submitted.
D. Has published and distributed descriptive literature and equipment
specifications on the items of equipment submitted.
2.1.2
Specifications of equipment as set forth herein are salient and minimum
requirements, unless otherwise stated and shall not be construed as limiting the
overall quality, quantity or performance characteristics of items furnished.
2.1.3
Systems and components shall have been thoroughly tested and proven in actual
use.
2.1.4
All systems and components shall be provided with the availability of a toll free
(U.S. and Canada) technical support number from the manufacturer. The number
shall provide technical assistance for either the dealer/installer or the end user at
no charge
2.2 SPECIFICATIONS
2.2.1
The Twisted pair active video receiver, shall be a NITEK Model TR560 or
approved equivalent, and shall be capable of receiving baseband type
monochrome or color video signals over unshielded twisted pair (UTP) telephone
cables, Category 3 or better, 24 gage or heavier up to a maximum cable length of
3,000 feet (900 meters), when connected to any NITEK Passive Video
Transceiver (or approved equivalent at the opposite end of the UTP.
2.2.2
The Twisted pair active video receiver, shall be capable of receiving baseband
type monochrome or color video signals over cables as specified in paragraph
2.2.1 to a maximum cable length of 6,000 feet (1,800 meters), when connected to
a NITEK Model TT560 active Video Transmitter (or approved equivalent) at the
opposite end of the UTP.
2.2.3
Receiving video signals, as described in paragraph 2.2.1 and 2.2.2 shall mean
that the active video receiver shall be capable of delivering a monochrome or
color video signal of 525 lines at the maximum specified distances.
2.2.4
The active receiver shall be provided with a power supply, which shall have
provisions to plug directly into a 120 VAC wall outlet and shall provide an output
voltage within the specifications of paragraph 2.3F. Output voltage shall be
provided over two appropriate gauge wires (2 foot minimum length) for
connection to the receiver power input terminals.
1
UNSHIELDED TWISTED PAIR ACTIVE VIDEO RECEIVER – TR560
TECHNICAL SPECIFICATIONS
SECURITY SYSTEM
DIVISION 16 – ELECTRICAL
SECTION 16 _ _ _ - CLOSED CIRCUIT TELEVISION (CCTV) SYSTEM
PART 2 – PRODUCTS (continued)
2.2 SPECIFICATIONS (continued)
2.2.5
The active receiver shall provide frequency equalization by means of eight dual
in-line (DIP) switches. The switches shall provide compensation for varying cable
lengths from 100 to 3,000 feet, when a NITEK passive transmitter (or approved
equivalent) is used and from 500 to 6,000 feet when a NITEK
TT560 active transmitter is used. The effect of the frequency compensation shall
be to both equalize and to amplify the video signal thereby providing loss
compensation for video as cable length is increased.
2.2.6
The active receiver shall be capable of equalizing a color video signal of NTSC
standard 525 lines or PAL standard 625 lines and shall deliver a baseband video
signal capable of driving a 75 ohm impedance load.
.
2.2.6
The active receiver shall have built-in transient protection, with a screw
connection for earth ground.
2.2.7
Video connection to the active receiver shall be by means of a BNC type
female connector. A five screw terminal block shall provide connection to the
UTP cable (2), 12 VDC power supply (2) and earth ground (1).
2.2.8
The active receiver shall also operate as specified in paragraph 2.2.1
when used as a receiver for any commercially available UTP equipped
camera, camera enclosure and/or dome in which a NITEK Model VB24 (or
approved equivalent) is installed as a transmitter device.
2.2.9 The active receiver shall operate within specifications without causing
interference or interfering with any other base band video, communication, data
and/or other low-voltage signals operating in multi-twisted pair UTP cables as
specified in paragraph 2.2.1 or 2.2.2.
2.2.10 The active receiver shall be covered by a Limited Two Year Warranty.
2.3 PERFORMANCE SPECIFICATIONS
2.3.1
The active receiver unit shall meet or exceed the following performance
specifications:
A. With a symmetrical and balanced composite input from the transmitter unit
and using cables as specified in paragraph 2.2.1, at a cable length of 3,000
feet, the output shall be a 1 Vpp composite video signal into 75 ohms.
B. With a symmetrical and balanced composite input from the transmitter unit
and using cables as specified in paragraph 2.2.2, at a cable length of 6,000
feet, the output shall be a 1 Vpp composite video signal into 75 ohms.
C. The receiver unit shall be capable of receiving RS170, NTSC, PAL, SECAM
and CCIR video formats (color or monochrome).
2
UNSHIELDED TWISTED PAIR ACTIVE VIDEO RECEIVER – TR560
TECHNICAL SPECIFICATIONS
SECURITY SYSTEM
DIVISION 16 – ELECTRICAL
SECTION 16 _ _ _ - CLOSED CIRCUIT TELEVISION (CCTV) SYSTEM
PART 2 – PRODUCTS (continued)
2.3 PERFORMANCE SPECIFICATIONS (continued)
D.
E.
F.
G.
Operating frequency range: DC to 10 MHz.
Common mode rejection to be > 70 dB.
Voltage requirements: 12 to 24 VAC or DC (Power Supply provided).
Size: Enclosure to be Black Cycolac ABS Flame Retardent Thermoplastic
with a maximum size of 1.25”h x 1.5”w x .75”d (w = 2.25” including BNC
connector).
H .Temperature: System must operate in an ambient temperature of –40
Degrees C to +85 degrees C, 0 to 98% non-condensing.
3