Download High Voltage Power Supplies

VME
High Voltage Power Supplies
The VME boards are a fingerprint of CAEN production, a deep
knowledge achieved in 20 years of experience with the world’s largest
physics experiments.
Initially born for data acquisition and front end applications, CAEN has
recently introduced a new series of VME programmable HV boards, able
to fit the same standard crate of DAQ systems. Thanks to the innovative
GECO2020 Control Software and the multimaster capability of CAEN
VME Bridges, it is possible to control independently the VME DAQ and
the VME Power Supply Units.
INDEX
�
Power Supplies
Universal Multichannel System
�
Modular Pulse Processing
Electronics
VME High Voltage Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
NIM High Voltage Power Supplies
Desktop High Voltage Power Supplies
Spectroscopy Solutions
High Power Low Voltage System
Power Supply Control Software
Educational Kit
Liquid Argon TPC Readout
System
Readout System for Multiplexed
Signals
Digital Detector Emulator
Accessories
• VME High Voltage Power Supplies
42
Power Supplies / VME High Voltage Power Supplies
CAEN 2014 Product Catalog
q VME High Voltage Power Supplies
V6519 6 Channel 500 V/3 mA VME HV Power Supply Module
CAEN
CAEN
OPC Server HV Wrapper
CA
E
N
• 6 channels in 1 unit wide VME 6U
module
• 500 V / 3 mA output ranges
• Available with positive, negative or
mixed polarity
• SHV coaxial output connectors
• Common floating return
• Low Ripple (Typ: <3mVpp)
• 10 mV Vset/Vmon resolution
• 50 nA Iset/Imon resolution (Optional
Imon-Zoom: 5 nA)
• Status output
• Channel ON/Status LEDs
• Interlock logic for board enable
• Individual channel enable
• Optional A6580 DC Input Power
Equalizer
• Module control via OPC Server
GECO
2 020
The V6519 is a 1-unit wide VME 6U module
housing 6 High Voltage Power Supply Channels
500V, 3mA. The board is available with either
positive or negative output polarity; mixed
version with 3 positive and 3 negative channels
is also available. The channels share a common
floating return, which allows on-detector
grounding reducing the noise level. HV outputs
are delivered through SHV connectors.
The HV output RAMP-UP and RAMP-DOWN
rates may be selected independently for each
channel in the 1÷ 100 V/s range with 1 V/s
steps. The module features 50 nA Iset/Imon
resolution. A Zoom option is available for Imon,
increasing resolution to 5 nA. The modules fit
into both VME/VME64 standard and V430 crates.
Functional parameters can be programmed and
monitored via VMEbus.
A complete set of software tools is available to
control these units, from low level libraries to
graphical application software. For detailed
information see the Power Supply Control
Software section.
See Reference Table p. 161
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning
when the output voltage differs from the
programmed value
• Programmable via trimmer HVMAX and IMAX
hardware protection limit
• OVERCURRENT detection: if a channel tries to
draw a current larger than its programmed
limit, it enters TRIP status, keeping the
maximum allowed value for a programmable
time (TRIP), before being switched off
• Channels can be enabled or disabled through
the Global Interlock logic
• Channels individually enabled via front panel
jumpers (passive or active mode available)
Available options:
• A6580 DC Input Power Equalizer
• Imon Zoom, increasing resolution to 5 nA
For libraries and
application software,
see p. 57.
Code
Description
WV6519MAAAAA
V6519M - 6 Channel VME Programmable High VoltagePower Supply (3 ch -500 V 3 mA, 3 ch +500 V 3 mA)
WV6519XAAAAA
V6519N - 6 Channel VME Programmable High VoltagePower Supply (-500 V 3 mA)
WV6519XPAAAA
V6519P - 6 Channel VME Programmable High VoltagePower Supply (+500 V 3 mA)
WPERS065XX01
V65XX Customization - Imon Zoom x10
WA6580XAAAAA
A6580 - DC Power Input Equalizer for V65XX Family
V6533 6 Channel 4 kV/3 mA (9 W) VME HV Power Supply Module
CAEN
CAEN
OPC Server HV Wrapper
CA
E
N
• 6 channels in 1 unit wide VME 6U
module
• 4 kV / 3 mA output ranges (9 W max)
• Available with positive, negative or
mixed polarity
• SHV coaxial output connectors
• Common floating return
• Low Ripple (Typ: from 3mVpp to
10mVpp)
• 100 mV Vset/Vmon resolution
• 50 nA Iset/Imon resolution (Optional
Imon-Zoom: 5 nA)
• Status output
• Channel ON/Status LEDs
• Interlock logic for board enable
• Individual channel enable
• Optional A6580 DC Input Power
Equalizer
• Module control via OPC Server
GECO
2 020
The V6533 is a 1-unit wide VME 6U module housing
6 High Voltage Power Supply Channels 4 kV, 3 mA (9
W max). The board is available with either positive
or negative output polarity; mixed version with 3
positive and 3 negative channels is also available.
The channels share a common floating return,
which allows on-detector grounding reducing
the noise level. HV outputs are delivered through
SHV connectors.
The HV output RAMP-UP and RAMP-DOWN
rates may be selected independently for each
channel in the 1÷ 500 V/s range with 1 V/s
steps. The module features 50nA Iset/Imon
resolution. A Zoom option is available for Imon,
increasing resolution to 5nA. The modules fit
into both VME/VME64 standard and V430 crates.
Functional parameters can be programmed and
monitored via VMEbus.
A complete set of software tools is available to
control these units, from low level libraries to
graphical application software. For detailed
information see the Power Supply Control
Software section.
See Reference Table p. 161
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning
when the output voltage differs from the
programmed value
• Programmable via trimmer HVMAX and IMAX
hardware protection limit
• OVERCURRENT detection: if a channel tries to
draw a current larger than its programmed
limit, it enters TRIP status, keeping the
maximum allowed value for a programmable
time (TRIP), before being switched off
• Channels can be enabled or disabled through
the Global Interlock logic
• Channels individually enabled via front panel
jumpers (passive or active mode available)
Available options:
• A6580 DC Input Power Equalizer
• Imon Zoom, increasing resolution to 5nA
For libraries and
application software,
see p. 57.
Code
Description
WV6533MAAAAA
V6533M - 6 Channel VME Programmable High Voltage Power Supply (3 ch -4 kV 3 mA, 3 ch +4 kV 3 mA, 9W)
WV6533XAAAAA
V6533N - 6 Channel VME Programmable High VoltagePower Supply (-4 kV 3 mA 9 W max.)
WV6533XPAAAA
V6533P - 6 Channel VME Programmable High VoltagePower Supply (+4 kV 3 mA 9 W max.)
WPERS065XX01
V65XX Customization - Imon Zoom x10
WA6580XAAAAA
A6580 - DC Power Input Equalizer for V65XX Family
43
Power Supplies / VME High Voltage Power Supplies
CAEN 2014 Product Catalog
VME High Voltage Power Supplies - continued q
See Reference Table p. 161
The V6534 is a 1-unit wide VME 6U module
housing 6 High Voltage Power Supply Channels
6 kV, 1 mA. The board is available with either
positive or negative output polarity; mixed
version with 3 positive and 3 negative channels
is also available. The channels share a common
floating return, which allows on-detector
grounding reducing the noise level. HV outputs
are delivered through SHV connectors.
The HV output RAMP-UP and RAMP-DOWN
rates may be selected independently for each
channel in the 1÷ 500 V/s range with 1 V/s
steps. The module features 20 nA Iset/Imon
resolution. A Zoom option is available for Imon,
increasing resolution to 2 nA. The modules fit
into both VME/VME64 standard and V430 crates.
Functional parameters can be programmed and
monitored via VMEbus.
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning
when the output voltage differs from the
programmed value
• Programmable via trimmer HVMAX and IMAX
hardware protection limit
• OVERCURRENT detection: if a channel tries to
draw a current larger than its programmed
limit, it enters TRIP status, keeping the
maximum allowed value for a programmable
time (TRIP), before being switched off
• Channels can be enabled or disabled through
the Global Interlock logic
• Channels individually enabled via front panel
jumpers (passive or active mode available)
Available options:
• A6580 DC Input Power Equalizer
• 6 channels in 1 unit wide VME 6U
module
• 6 kV / 1mA output ranges (9 W max)
• Available with positive, negative or
mixed polarity
• SHV coaxial output connectors
• Common floating return
• 100 mV Vset/Vmon resolution
• 20 nA Iset/Imon resolution (Optional
Imon-Zoom: 2 nA)
• Status output
• Channel ON/Status LEDs
• Interlock logic for board enable
• Individual channel enable
• Optional A6580 DC Input Power
Equalizer
• Module control via OPC Server
• Imon Zoom, increasing resolution to 5 nA
Description
WV6534XAAAAA
V6534N - 6 Channel VME Programmable High VoltagePower Supply (-6 kV 1 mA)
WV6534XPAAAA
V6534P - 6 Channel VME Programmable High VoltagePower Supply (+6 kV 1 mA)
WPERS065XX01
V65XX Customization - Imon Zoom x10
WA6580XAAAAA
A6580 - DC Power Input Equalizer for V65XX Family
See Reference Table p. 161
V6521
6 Channel
6 kV/300 μA VME HV Power Supply Module
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning
when the output voltage differs from the
programmed value
• Programmable via trimmer HVMAX and IMAX
hardware protection limit
• OVERCURRENT detection: if a channel tries to
draw a current larger than its programmed
limit, it enters TRIP status, keeping the
maximum allowed value for a programmable
time (TRIP), before being switched off
• Channels can be enabled or disabled through
the Global Interlock logic
• Channels individually enabled via front panel
jumpers (passive or active mode available)
Available options:
• A6580 DC Input Power Equalizer
• Imon Zoom, increasing resolution to 500 pA
• 6 channels in 1 unit wide VME 6U
module
• 6 kV / 300 µA output ranges
• Available with positive, negative or
mixed polarity
• SHV coaxial output connectors
• Common floating return
• Low Ripple (Typ: <3 mVpp)
• 100 mV Vset/Vmon resolution
• 5 nA Iset/Imon resolution (Optional
Imon-Zoom: 500 pA)
• Status output
• Channel ON/Status LEDs
• Interlock logic for board enable
• Individual channel enable
• Optional A6580 DC Input Power
Equalizer
• Module control via OPC Server
CAEN
CAEN
OPC Server HV Wrapper
CA
N
E
A complete set of software tools is available to
control these units, from low level libraries to
graphical application software. For detailed
information see the Power Supply Control
Software section.
2 020
For libraries and
application software,
see p. 57.
V6534M - 6 Channel VME Programmable High VoltagePower Supply (3 ch -6 kV 1 mA, 3 ch +6 kV 1 mA)
The HV output RAMP-UP and RAMP-DOWN
rates may be selected independently for each
channel in the 1÷ 500 V/s range with 1 V/s steps.
The module features 5 nA Iset/Imon resolution.
A Zoom option is available for Imon, increasing
resolution to 500 pA. The modules fit into
both VME/VME64 standard and V430 crates.
Functional parameters can be programmed and
monitored via VMEbus.
CAEN
GECO
N
WV6534MAAAAA
The V6521 is a 1-unit wide VME 6U module
housing 6 High Voltage Power Supply Channels
6 kV, 300 µA. The board is available with either
positive or negative output polarity; mixed
version with 3 positive and 3 negative channels
is also available. The channels share a common
floating return, which allows on-detector
grounding reducing the noise level. HV outputs
are delivered through SHV connectors.
CAEN
OPC Server HV Wrapper
E
Code
6 Channel
6 kV/1 mA VME HV Power Supply Module
CA
A complete set of software tools is available to
control these units, from low level libraries to
graphical application software. For detailed
information see the Power Supply Control
Software section.
V6534
GECO
2 020
For libraries and
application software,
see p. 57.
Code
Description
WV6521MAAAAA
V6521M - 6 Channel VME Programmable High Voltage Power Supply (3 ch -6 kV 300 µA, 3 ch +6 kV 300 µA)
WV6521XAAAAA
V6521N - 6 Channel VME Programmable High VoltagePower Supply (-6 kV 300 µA)
WV6521XPAAAA
V6521P - 6 Channel VME Programmable High VoltagePower Supply (+6 kV 300 µA)
WPERS065XX01
V65XX Customization - Imon Zoom x10
WA6580XAAAAA
A6580 - DC Power Input Equalizer for V65XX Family
44
Power Supplies / VME High Voltage Power Supplies
CAEN 2014 Product Catalog
q VME High Voltage Power Supplies
V6521H
CAEN
CAEN
OPC Server HV Wrapper
CA
E
N
6 Channel 6 kV/20 μA VME HV Power Supply Module
• 6 channels in 1 unit wide VME 6U
module
• 6 kV / 20 µA output ranges
• Available with positive, negative or
mixed polarity
• SHV coaxial output connectors
• Common floating return
• Low Ripple (Typ: <3 mVpp)
• 100 mV Vset/Vmon resolution
• 1 nA Iset/Imon resolution (Optional
Imon-Zoom: 100 pA)
• Status output
• Channel ON/Status LEDs
• Interlock logic for board enable
• Individual channel enable
• Optional A6580 DC Input Power
Equalizer
• Module control via OPC Server
GECO
2 020
For libraries and
application software,
see p. 57.
Code
The V6521H is a 1-unit wide VME 6U module
housing 6 High Voltage Power Supply Channels
6 KV, 20 µA. The board is available with either
positive or negative output polarity; mixed
version with 3 positive and 3 negative channels
is also available. The channels share a common
floating return, which allows on-detector
grounding reducing the noise level. HV outputs
are delivered through SHV connectors.
The HV output RAMP-UP and RAMP-DOWN
rates may be selected independently for each
channel in the 1÷ 500 V/s range with 1 V/s steps.
The module features 1 nA Iset/Imon resolution.
A Zoom option is available for Imon, increasing
resolution to 100 pA. The modules fit into
both VME/VME64 standard and V430 crates.
Functional parameters can be programmed and
monitored via VMEbus.
A complete set of software tools is available to
control these units, from low level libraries to
graphical application software. For detailed
information see the Power Supply Control
Software section.
See Reference Table p. 161
Safety features include:
• OVERVOLTAGE and UNDERVOLTAGE warning
when the output voltage differs from the
programmed value
• Programmable via trimmer HVMAX and IMAX
hardware protection limit
• OVERCURRENT detection: if a channel tries to
draw a current larger than its programmed
limit, it enters TRIP status, keeping the
maximum allowed value for a programmable
time (TRIP), before being switched off
• Channels can be enabled or disabled through
the Global Interlock logic
• Channels individually enabled via front panel
jumpers (passive or active mode available)
Available options:
• A6580 DC Input Power Equalizer
• Imon Zoom, increasing resolution to 100 pA
Description
WV6521HAAAAA
V6521HN - 6 Channel VME Programmable High Voltage Power Supply (-6 kV 20µA/1nA res)
WV6521HMAAAA
V6521HM - 6 Channel VME Programmable High Voltage Power Supply (3ch -6 kV 20µA, 3ch +6kV 20uA/1nA res)
WV6521HPAAAA
V6521HP - 6 Channel VME Programmable High Voltage Power Supply (+6 kV 20µA/1nA res)
WPERS065XX01
V65XX Customization - Imon Zoom x10
WA6580XAAAAA
A6580 - DC Power Input Equalizer for V65XX Family
Did you Know?
CA
N
E
FREELOAD
N
DOW
GECO
2 020