Download UH_Quick User Guide

Packet Hub
159, Jalan Templer
46050 Petaling Jaya
Selangor Darul Ehsan
Malaysia.
Tel: +60-3-74508888
Fax: +60-3-74508899
Quick User Guide
For UH – Hostless WIMAX USB Modem
(Web-based Connection Manager)
Prepared by:
Green Packet Berhad
Date:
June 16, 2011
Proprietary & Confidential Document
Document Information
UH – Hostless WiMAX USB
Modem Quick User Guide
Title:
Our Reference #:
Prepare by:
Hoe Kah Sing
Approval by:
Document Version:
Rev 1.1
Document Date:
June. 16, 11
Document Distribution/To
Company
Purpose**
Attention
Tel/Fax/Email
Updated Document
Rev.
Release
Date
Updated
By
Approval
by
Description of Change
1.0
May 13, 11
Hoe Kah
Sing
Hoe Kah
Sing
Based on
CMFree_UH350_GP_GUI_1_9_0_4_20110421_new_BCFG.bin
1.1
June 16,
11
Hoe Kah
Sing
Hoe Kah
Sing
Official term changed from CM-less (CM-free) to Hostless
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 2 of 12
Revision 1.1
Proprietary & Confidential Document
TABLE OF CONTENTS
1.
GENERAL ................................................................................................................................... 4
2.
ATTACHMENT OF DEVICE .......................................................................................................... 5
3.
CONFIGURE HOSTLESS UT DEVICE THROUGH WEB BROWSER ................................................... 6
3.1.
3.2.
3.2.1.
3.2.2.
3.2.3.
3.3.
3.4.
3.5.
3.6.
OVERVIEW .............................................................................................................................. 6
WIMAX CONFIGURATION ......................................................................................................... 7
CONNECT SETTINGS .................................................................................................................. 7
FREQUNECY SETTINGS ............................................................................................................... 8
AUTHENTICATION SETTINGS ....................................................................................................... 9
BASE STATION LIST ................................................................................................................. 10
WIMAX STATISTICS................................................................................................................ 11
SYSTEM LOG ......................................................................................................................... 12
ABOUT PAGE ......................................................................................................................... 12
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 3 of 12
Revision 1.1
Proprietary & Confidential Document
1.
GENERAL
This section guides user through the configuration of UH through web-based visual aids for
easier understanding.
1.1
Hardware and Software of the UH – Hostless Dongle
The hardware and software requirements of UH are shown in the table below:No.
Descriptions
Specifications
Qty
A
Hardware
1
UH WiMAX USB Dongle
B
Software
1
Integrated CM-free Solution: RNDIS
Window Series OS
1
2
Integreted CM-free Solution: CDC
Linux and MAC OS
1
1
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 4 of 12
Revision 1.1
Proprietary & Confidential Document
2.
ATTACHMENT OF DEVICE
Kindly follows the below steps for attaching the UH to the USB port of computer host as well
as it’s driver installation.
1. Attach the UH to the USB port of the computer and the driver will be installed
automatically.
2. Once its driver installed successfully, an additional Network adapter will appear on
the Device Manager (in Window System) as following:
3. Kindly type the ipconfig on the Command Prompt to check default gateway of the UT
dongle. By default, its gateway address is 10.2.3.254 as below:
4. Please use the ping command to check the connectivity between host and UT device.
If the host can reach the UH device using the ping command, then the RNDIS device
has succesffuly attached.
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 5 of 12
Revision 1.1
Proprietary & Confidential Document
3.
CONFIGURE Hostless UH DEVICE THROUGH WEB BROWSER
3.1. Overview
User could check the network and device information and connect/disconnect the WiMAX
connection by browsing the device configuration interface via the default gateway address
of the device http://10.2.3.254/
1
2
4
3
5
1. WiMAX Status Info – Check the status of connectivity (e.g.: Frequency of the
connected Base Station, Signal Strenght [RSSI], Link Quanlity [CINR] and etc.)
2. LAN Info – IP address of the device gateway.
3. WAN Info – Mac Address of UH Modem and details of WAN network (e.g.: public IP
aAdress, WAN gateway, and etc.)
4. Authentication Info – Username and Password that being used for establishing the
WiMAX connection.
5. Connect/Disconnect Button – To connect and disconnect the WiMAX connection.
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 6 of 12
Revision 1.1
Proprietary & Confidential Document
3.2. WiMAX Configuration
The device and WiMAX configuration settings
http://10.2.3.254/guest/ with the credential below:
can
be
done
by
loggin
to
Username: guest
Password: guest
Browse to Configuration > WiMAX tab to configure accordingly:
1. Basic Connection Settings
2. Frequency List Settings
3. Authentication Settings
1
2
3
3.2.1. Connect Settings
User could set the connection of the device via checked box method.
 Connect when started: Try to connect to WiMAX when the UH is plugged.
 Reconnect when join net failed: Re-try for establish connection when network
entry fails.
 Reconnect on link lost: Reconnect when connection drop happens.
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 7 of 12
Revision 1.1
Proprietary & Confidential Document
3.2.2. Frequnecy Settings
Frequency settings page allows uer to configure Frequency [kHz] and its bandwidth
[MHz]for scanining the corresponding Base Station and its communication.
Delete the Frequency
Add new Frequency to
List
Save the Configuration
Press the Add button to add additional frequency items. After a new item is added,
press the OK button to add it to the list of entries. Use the Trash Can icon to remove
entries. Click the Save button to commit your changes.
Note: Frequency and Bandwidth setup is base on the local WiMAX license.
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 8 of 12
Revision 1.1
Proprietary & Confidential Document
3.2.3. Authentication Settings
This Authentication Settings tab allows configuration of the authentication settings for
the WiMAX network.
a
b
c
d
e
f
g
Save the Configuration
a) Four authentication modes from the Auth Mode – No authentication, User
authentication, Device authentication or User and device authentication are
available to be choosen.
b) Choose the EAP type which your AAA is configured from EAP Method. Key in EAP
Outer ID if required by AAA Server (Authentication, Authorization and Accounting).
c) Click Browse button at the Server Root CA Certificate and browse to the path
where the CA Certificate is located. Check the box of Ignore Root CA Verify if
verification of BS certificate can be skipped.
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 9 of 12
Revision 1.1
Proprietary & Confidential Document
d) Click Browse button at the Device Certificate File and browse to the path where the
Device Certificate is located (if Device Certificate is required for Authentication).
e) Click Browse button at the Device Private Key and browse to the path where the
Private Key Certificate is located.
f) Key in the Private Key Password and it is required only when the Private Key File in
(e) is encrypted (if Private Key Certificate and Key Password are required for
Authentication).
g) Select the Inner Mode of the EAP Method and Key in User Name and Password
configured in AAA.
Finally, click the Save button to activate the configured profile.
3.3. Base Station List
BS List page shows currently found base station information on the device. Pressing the
Refresh button would trigger system re-scan.
Refresh Button
This provides details of the RF condition of the detected Base Stations.
RSSI
CINR
Received Signal Strength Indication (RSSI) is a measurement of the power
present in a received radio signal.
CINR refers to Carrier to Interference-plus-Noise Ratio. It gives you a
measurement of signal effectiveness, taking into consideration the amount of
signal interference.
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 10 of 12
Revision 1.1
Proprietary & Confidential Document
3.4. WiMAX Statistics
WiMAX Statistics page shows current WiMAX statistics and status for reference purpose.
The information about the currently connected WiMAX network such as device, receiving
signal strength and quality, transmit power and Modulation Code Scheme for UL and DL will
be shown in the Link Status.
Link Satistics gives you a summary of the information transmit and receive packets as well
as the amount of data transmited and received for that connected session.
Mac Statistics provides the information of the Mac Layer information for both Uplink and
Downlink.
© Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 11 of 12
Revision 1.1
Proprietary & Confidential Document
3.5. System Log
System Log page is accessible via System > System Log and it shows log information in
circular buffer of device. It only stores simple information in RAM and can be reset by replugging device or power cycle.
System Log
3.6. About Page
This page gives you a summary of info for UH Hostless Device , such as Software version,
Firmware version, Web Interface version, Device Serial Number, Flash Ext Info, and etc.
- End of Document © Green Packet Berhad
Title: UH – Hostless WiMAX USB Modems Quick User Guide
Page 12 of 12
Revision 1.1