Download Flexi-Biogas - Pwani University

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Physical organic chemistry wikipedia , lookup

Strychnine total synthesis wikipedia , lookup

Fischer–Tropsch process wikipedia , lookup

Hydroformylation wikipedia , lookup

Methane clathrate wikipedia , lookup

Transcript
FUNDED BY THE PWANI UNIVERSITY RESEARCH FUND – PURB 015/11
At a Glance
“Charcoal is the cancer of poverty” a comment from Biogas International Limited
(http://www.biogas.co.ke/) captures the spirit in the vision of this Project. The high dependency
on coal and fire wood is a great burden to ecosystems and its diversity globally. The use of
firewood and open fires for cooking also present is considered also as a health risk. Notably, with
diminishing sources of forest wood and charcoal due to deforestation and strict regulation of
cutting trees, there is a dire need to establish affordable, renewable, green sources of energy.
Left Photo: Depleted forest for firewood
and charcoal
Right Photo: A typical Flexi-Biogas System
(Pwani University Flexi Biogas Unit)
The Pwani University Flexi-Biogas Project was envisioned as an adaptation model to package
Biogas Technology for small-holder resource poor farmers while testing alternative substrates
for methane gas production. The Project aims to test various alternative substrates generated
from both plant and animal waste products.
Achieved outputs
A working Flexi-biogas system with a user portal which has totally replaced the use of electricity
and charcoal for cooking has been established at Pwani University Farm. The Flexi-biogas Demo
Unit is now one of the PU-FARM highlight sites for educational trips for Colleges and Schools.
The site is also a fixed asset available for other biogas Projects. A new phase has been envisaged
towards constructing a slurry pathways and pit for harvesting the bio-slurry useful as very potent
organic manure. Other substrates in the pipeline for testing include the kitchen waste, and waste
from poultry, rabbits, small ruminants and donkeys and Jatropha pruning waste.
Some Key information on Biogas Production
Hydrolysis
In general, hydrolysis is a chemical reaction in which the breakdown of water occurs to form H+
cations and OH- anions. Hydrolysis is often used to break down larger polymers, often in the
presence of an acidic catalyst. In anaerobic digestion, hydrolysis is the essential first step, as
Biomass is normally comprised of very large organic polymers, which are otherwise unusable.
Through hydrolysis, these large polymers, namely proteins, fats and carbohydrates, are broken
down into smaller molecules such as amino acids, fatty acids, and simple sugars. While some of
the products of hydrolysis, including hydrogen and acetate, may be used by methanogenesis later
in the anaerobic digestion process, the majority of the molecules, which are still relatively large,
must be further broken down in the process of acidogenesis so that they may be used to create
methane.
Acidogenesis
Acidogenesis is the next step of anaerobic digestion in which acidogenic microorganisms further
break down the Biomass products after hydrolysis. These fermentative bacteria produce an acidic
environment in the digestive tank while creating ammonia, H2, CO2, H2S, shorter volatile fatty
acids, carbonic acids, alcohols, as well as trace amounts of other byproducts. While acidogenic
bacteria further breaks down the organic matter, it is still too large and unusable for the ultimate
goal of methane production, so the biomass must next undergo the process of acetogenesis.
Acetogenesis
In general, acetogenesis is the creation of acetate, a derivative of acetic acid, from carbon and
energy sources by acetogens. These microorganisms catabolize many of the products created in
acidogenesis into acetic acid, CO2 and H2. Acetogens break down the Biomass to a point to
which Methanogens can utilize much of the remaining material to create Methane as a Biofuel.
Methanogenesis
Methanogenesis constitutes the final stage of anaerobic digestion in which methanogens create
methane from the final products of acetogenesis as well as from some of the intermediate
products from hydrolysis and acidogenesis. There are two general pathways involving the use of
acetic acid and carbon dioxide, the two main products of the first three steps of anaerobic
digestion, to create methane in methanogenesis:
CO2 + 4 H2 → CH4 + 2H2O
CH3COOH → CH4 + CO2
While CO2 can be converted into methane and water through the reaction, the main mechanism
to create methane in methanogenesis is the path involving acetic acid. This path creates methane
and CO2, the two main products of anaerobic digestion.
Temperature Measurement
Temperature is a key component to the efficiency of anaerobic digesters. As in other chemical
and biological processes, the more energy that is put into a reaction, the faster the reaction runs,
until a point of degradation occurs. Being that organisms are responsible for the digestion
process, it is vital to ensure that the entire process is kept within a certain temperature range to
maximize reaction speed and organism livelihood. That being said, the range depends on the
species of organism used. The two most widely used types of microorganisms are mesophiles,
which undergo mesophilic digestion, and thermophiles, which undergo thermophilic digestion.
Mesophiles are most efficient at moderate temperature ranges between 25-40°C while
thermophiles run most efficiently at higher ranges between 45-80°C. The words mesophile and
thermophile are simply terms used to classify broad groups of organisms and just describe the
temperature of their livable environment. Ideally, one should know the exact microorganism
used and know the range that is most suitable for that specific species. As in other chemical
processes, if the temperature is monitored during the digestion process and kept in the upper
portion of the specific range given, the rate of reaction will be at its highest value producing
more gas in the same amount of time. While higher temperatures produce higher gas yields, they
are also more difficult and expensive to maintain making temperature a vital aspect to measure
throughout the digestion process.
CO2 and Methane Measurement
Biogas production rate is also a key component to maximizing anaerobic digestion efficiency. It
is vital to constantly measure Biogas emissions (methane, carbon dioxide, trace amounts of
siloxanes, hydrogen sulfide, ammonia, hydrocarbons, and water) as the production levels are
good indications of production abnormalities, Biomass quantities, and microorganism well
being. Being that in anaerobic digestion, biogas is produced with a normal distribution; the
What then is Flexi-Biogas?
(a brief from BIL)
This is a Clean, Practical, Affordable, Sustainable green energy technology with several
advantages;
1. 100% of the Methane produced is capture in the Flexi biogas
systems.
2. Harmless carbon dioxide and water are released when
Methane-CH4 is burned.
3. Fertilizer output is concentrated organic 100% composted and
seedbed ready with no further processing or curing required.
Micro-Greenhouse Tunnel
Importance of The Tunnel
Temperature is a key catalyst to the
production of biogas. Housed within a
sealed tunnel, the system will quite easily
achieve temperatures upwards 40C.
Heat Energy Capture
During the day, the tunnel captures solar
radiation
whereby
increasing
the
temperature of the substrate within the
digester. This also occurs on cloudy days but
obviously to a lesser degree.
Heat Retention
Concealing the digester envelope, during the evenings the tunnel becomes an insulated jacket
preventing heat losses and therefore continued high rate of fermentation and gas production.
UV filter
Also, the greenhouse fabric is a UV filer and so further extends the life expectancy of the
digester fabric.
Flexi Biogas Systems, a Total Energy Solution
With this increased efficiency and large gas production capacity, one is now able to run
generators and conventional agri-tool such as chaff cutters, water pumps, milking machines, etc
from a single BG6 Flexi-Biogas system.
Simplicity
·
The plants are fabricated from reinforced long lasting UV resistant plastic
·
All components can be recyclable after use
·
User serviceable components are widely locally available
Portability
When packed the kit is compact and lightweight, and can be transported on a motorcycle bodaboda. When up-scaling, you can sell current system and install a larger capacity system and
when moving house you just roll it up and take it with you.
Installation - The system is surface mounted and in most scenarios, can be installs in one or two
days
·
No construction, digging, masonry, building etc
·
No heavy transport costs
·
No contractors and fundi's No hassle
Continuous-flow, CF - Batch Combo - Large domestic 9m3
Biogas International have recently super upgraded the digester design branding it the
Continuous-Flow Batch Combo or ‘CF Batch Combo'. As well as being used as a continuous
flow system, the new system design also very simply allows for large volume batch digestion
of periodic bulk inputs such as mass market waste, water hyacinth, agro processed waste etc
The new digester has Zip-like seals across either end of the envelope so using bulky inputs, and
emptying the digester can be achieved very simply. Synchronising more than one digester with a
scheduled input supply will continuously produce large volumes of both gas and fertilizer.
PWANI UNIVERSITY
FLEXI-BIOGAS DEMO-UNIT
A selection of events
from the inception of the PU-BIL Flexi-Bio Project to date….