Download 50 ohm Resistor - Bruck Lighting

Bruck By Ledra Brands Inc.
15774 Gateway Circle
Tustin, CA 92780
Job Name:
Contact:
Ordering Code:
Fixture Type:
PH: 714.259.9959
FAX: 714.259.9969
www.brucklighting.com
50 ohm Resistor
Description
The 50 ohm Resistor is used in conjunction with a T-Series Transformer to improve the operation of select
Low Voltage LED Spots: Caliber, Mag 1, Mag 2, and Titan M with Uniplug. The resistor reduces inrush current
to the fixture and improves dimming performance. Order (1) resistor per Transformer as needed. T-600
requires (2) resistors due to 2X300W circuits.
Housing
Molded construction metal housed ceramic resistor with 6” wire leads, made for high performance
applications.
Mounting
The resistor must be installed by a qualified electrician, wired across the secondary 12V output terminals of the
T-series Transformer (T-60/T-150/T-300/T-600). The resistor may be wired and placed within the transformers
wiring compartment housing. Please refer to the installation instructions.
Electrical / LED Driver
12V AC input, 2.9W (rated for 5W).
Ordering Codes
Follow the steps to specify, example:
P70696
50 ohm Resistor
1-3/16"
11/16"
P70696
3/8"
Part Number
5/8"
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
v.9.21.16
50 ohm
Page 1 of 1