Download D3000 1.4 - Electromagnetic Devices-1

D3000 1.4 - Electromagnetic Devices-1
Items supplied with the D3000 1.4
study module include:
ƒ Circuit board
ƒ Laboratory manual
ƒ Storage case
Additional items required:
ƒ D3000 Experiment Platform
or
D3000 Virtual Instrument Platform (VIP)
ƒ Digital Multimeter*
ƒ Oscilloscope*
ƒ Signal Generator*
* Note that separate test instruments are
not needed if the D3000 VIP is used, as
all required test equipment is provided
in the form of on-screen ‘virtual’
instruments.
If a D3000 VIP is used, or if the study
module is to be used in a ClassAct
computer managed learning environment,
then a student PC will also be required.
Optional supporting items:
The D3000 1.4 study module introduces
students to the principles of magnetism
and electromagnetism through a wide
range of practical activities.
This study module has been designed
specifically to operate within a DIGIAC
modular electronics program. It comprises
a circuit board and student laboratory
manual housed in an injection molded
storage case.
When used in conjunction with a
student personal computer (PC), the
laboratory manual is fully compatible with
the ClassAct computer managed learning
system.
The laboratory manual is divided into a
series of chapters. Each covers a specific
topic area and provides background
theory, practical activities and student
assessment questions.
Each chapter is designed around a list of
performance objectives. These objectives
are used by the ClassAct management
system to generate a student competency
report.
Typical topic areas include:
ƒ Permanent Magnets and Magnetic Fields.
ƒ Electromagnets
ƒ Electromagnetic Induction
ƒ Inductive Reactance
ƒ The Transformer
ƒ Solenoid
ƒ Relay
ƒ Force on a Conductor and Motor Principle
ƒ Stepper Motor
ƒ Instructor Solutions Book
Provides question solutions and typical
results for all work provided in the
laboratory manual.
ƒ eCAI package (electronic Computer
Aided Instruction)
Provides an on-screen, interactive
version of the laboratory manual for use
in stand-alone, ClassAct, ClassCampus
or SCORM environments.
Typical activities include:
ƒ Assess the properties of magnetic core
materials and the field strength around
a magnet.
ƒ Use the Hall probe to determine the
behavior of an electromagnet with different
core materials and their relative
permeability.
ƒ Determine the effect of core materials
on coil inductance.
ƒ Investigate the effect of turns ratio on
voltage ratio.
ƒ Investigate the effect of turns ratio on
current ratio.
ƒ Investigate the frequency response of
different core materials.
ƒ Investigate pull-in voltage for a solenoid.
ƒ Determine pull-in and drop-out voltage and
current for a relay.
ƒ Diagnose faults in relay circuits.
ƒ Investigate the operation of a simple DC
motor.
ƒ Determine EMF in a generator armature.
ƒ Determine the operation of full step and
half-step motors.
Order as:
D3000 1.4
Electromagnetic Devices-1
study module
D3000 IS 1.41 Electromagnetic Devices-1
Instructor Solutions Book
Please contact LJCreate for further
information about eCAI license options.
No.
Chapters
www.ljcreate.com
Ref No. P5410-C
9
Total
Average
time
70 minutes
11 hours
Page 1 of 1