Download Torque Wrenches - Motorq

Torque Products
Torque Wrenches - Motorq
Torque wrenches are essential for the correct tightening of fixings to a pre-determined
limit and these can be set to ‘click’ when the required torque has been reached.
Part No. Description
800020
800060
800100
800101
800200
800300
800330
800399
Motorq 20
Motorq 60
Motorq 100
Motorq 101
Motorq 200
Motorq 300
Motorq 330
Motorq 399
Drive
Sq.Dr.
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
3/4”
Range
Nm
Range
lbf.ft.
4-20
8-60
20-100
20-100
40-200
60-300
60-330
80-400
*
Length
mm
Weight
kg
220
307
347
347
443
570
683
683
0.40
0.80
0.70
0.70
1.00
1.40
1.50
2.10
40-180
5-45
15-80
15-80
30-150
45-220
45-250
60-300
* Denotes lbf.in.
800020
SQUARE
1/220
”
Torque Wrench - Motorq
DRIVE
with Calibration Certificate
SQUARE
3/8”
DRIVE
• The patented gearing design of these torque wrenches
•
•
•
•
•
•
•
provides 80mm scale length, enabling very accurate setting
over a wide torque range.
72 tooth ratchet head with reverse slide control.
Simple, positive torque locking knob prevents accidental
alteration of setting.
Dual scale - Nm & lbf.ft.
Accurate to + or – 3% of full scale
Manufactured to IS06789 standard
Chemical resistant lens for clear reading of scale.
Supplied with calibration certificate, traceable to
National Standards.
SQUARE
3/4”
DRIVE
• Invaluable for use on low torque applications, the torque setting is
obtained by rotating the knurled knob on the end of the handle.
• Push through square drive for tightening or
SQUARE
releasing left and right hand threads.
1”
800020
DRIVE
SQUARE
1/2”
Torque Wrench - Motorq
DRIVE60
with Calibration Certificate
800060
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
• A high quality, professional wrench which is particularly suitable for
light engineering machinery, motorcycles and light vehicle applications.
• Slim body in durable satin chrome. ”
1locking knob.
• Comfortable nylon handle with positive
• Complies to BSEN 26789 and ISO 6789.
• Spares: 800115 Ratchet Repair Kit
SQUARE
800060
DRIVE
SQUARE
1/2”
Torque Wrench - Motorq
DRIVE100
with Calibration Certificate
800100
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
800100
• For general engineering, workshop, construction,
aero, marine and light vehicle applications.
• Spares: 800115 Ratchet Repair Kit ”
SQUARE
1
DRIVE
800101
Torque Wrench - Motorq 101
with Calibration Certificate
SQUARE
1/2”
DRIVE
• For general engineering, workshop, construction, aero,
marine and light vehicle applications.
• Spares: 800305 Ratchet Repair Kit
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
800101
SQUARE
1”
DRIVE
Service & Diagnostics
139
Torque Products
Torque Wrenches - Motorq
800200
Torque Wrench - Motorq 200
with Calibration Certificate
SQUARE
1/2”
DRIVE
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
• For medium/heavy engineering, workshop, construction,
aero, marine and commercial vehicle applications.
• Spares: 800305 Ratchet Repair Kit
800200
SQUARE
1”
DRIVE
800300
Torque Wrench - Motorq 300
with Calibration Certificate
SQUARE
1/2”
DRIVE
• For medium heavy engineering, workshop, construction,
•
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
aero, marine and medium/heavy commercial vehicle
applications.
Spares: 800335 Ratchet Repair Kit
SQUARE
800300
1”
DRIVE
800330
Torque Wrench - Motorq 330
with Calibration Certificate
SQUARE
1/2”
DRIVE
• Similar features to 800300, but with increased torque range
and length.
• Push through square drive to allow tightening of
both left and right hand threads.
• Spares: 800336 Ratchet Repair Kit
1”
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
800330
SQUARE
DRIVE
800399
SQUARE
Torque Wrench
- MotorqSQUARE
399
1
3
”
with Calibration
/2Certificate
/8”
DRIVE
DRIVE
• Push through square drive to allow tightening of
both left and right hand threads.
• Spares: 800396 Ratchet Repair Kit
SQUARE
1”
DRIVE
140
SQUARE
3/4”
DRIVE
800399
Torque Products
Heavy Duty Torque Wrenches - Motorq
Heavy Duty Torque Wrenches
• These heavy duty, robust back-break type wrenches are fitted
•
•
•
with left and right hand 36 tooth ratchet head, and feature easy
adjustment by means of a graduated scale at handle end of tool.
Instant collapse of mechanism seen and felt on reaching
pre-set loading.
Rugged construction to withstand heavy usage.
Push through square drive to allow tightening of both
left and right hand threads.
Part No. Description
800400
800500
800550
Motorq 400
Motorq 500
Motorq 550
Drive
Sq.Dr.
Range
Nm
3/4”
3/4”
1”
Range
lbf.ft
150-700 100-500
300-1000 200-750
700-1500 500-1000
Length
mm
Weight
kg
1150
1475
1470
6.30
7.30
10.9
SQUARE
1/2”
DRIVE
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
SQUARE
1”
DRIVE
SQUARE
1/2”
DRIVE
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
SQUARE
1/2”
DRIVE
800400
SQUARE
3/8”
DRIVE
SQUARE
1”
DRIVE
SQUARE
1”
DRIVE
800500
800550
Service & Diagnostics
141
Torque Products
Torque Wrenches - Handitorq
‘Handitorq’ Torque Wrench Range
A new range of competitively priced Torque Wrenches, designed for the
automotive market. Ideal for Tyre Shops and Fast-Fits, these Torque Wrenches
are designed for that sector of the market where economy is important, but are
still manufactured and calibrated to a professional standard. They may not have
all of the features of the ‘Motorq’ range, but are ideal where repetitive torque
measurements are required e.g. Wheel Nuts.
• Professional quality torque wrenches c/w reversible QR ratchet.
• Bi-directional – can be used for left-hand and right-hand applications.
• Simple adjustment and locking mechanism.
• Manufactured to ISO6789 quality standard with accuracy to ± 3%.
• Supplied with fully traceable Calibration Certificate to international standards.
• Dual Scale: Nm and lbf.ft.
• Quick release ratchet with reversing lever.
• Micrometer scale adjustment with spring loaded locking ring.
• Supplied in moulded plastic storage case.
Part No. Description
810020
810100
810200
810330
HandiTorq 20
HandiTorq 100
HandiTorq 200
HandiTorq 330
Drive Range
Sq. Dr.
Nm
1/4”
4 – 20
3/8” 20 – 100
1/2” 40 – 200
1/2” 60 – 340
Range
lbf.ft.
39.8 – 172.6*
16.6 – 71.9
33.2 – 143.8
51.6 – 243.4
Length
mm
325
435
521
613
Weight
kg
0.64
1.30
1.59
1.81
* Denotes lbf.in.
• Warranty Information:
- Lifetime warranty on materials and manufacturing.
- 12 months warranty on calibration.
- 12 months warranty on ratchet mechanism (due to wear & tear).
Torque Products
810020
810100
810200
810330
Torque Wrench Storage/Display
800805
Torque Wrench Panel Pack
• 6 Motorq torque wrenches and 2 angular torque gauges mounted on a steel perforated panel complete with lockable hooks.
• All Torque Wrenches come with Calibration Certificates.
Part No.
800020
800060
800100
800200
800300
800330
800700
800750
Description
Torque Wrench - Motorq 20
Torque Wrench - Motorq 60
Torque Wrench - Motorq 100
Torque Wrench - Motorq 200
Torque Wrench - Motorq 300
Torque Wrench - Motorq 330
Angular Torque Gauge
Angular Torque Gauge
Perforated Panel
155428 Metal
1000 x 457mm
800829 Hook Kit
142
Torque Products
80070000
Angular Torque Gauges
80
• Vehicle manufacturers have adopted torque tightening
•
procedures which also involve the turning of a torqued
fastener through a further angular movement on
applications such as cylinder head bolts, big end bearings,
main bearing bolts, flywheel bolts etc.
Oil resistant and clearly graduated, non-reflective surface
and an adjustable reaction arm which can be set and
fixed against the adjacent component to prevent the
scale turning.
800750
3/4” Square Drive
Male and Female
800700
1/2” Square Drive
Male and Female
SQUARE
1/2”
DRIVE
SQUARE
3/8”
DRIVE
DRIVE
DRIVE
SQUARE
SQUARE
DRIVE
DRIVE
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
1”
1”
Torque Products
SQUARE
SQUARE
1/32/”4”
Torque Multipliers
• Single stage epicyclic gears, producing a 5 : 1 multiplication ratio.
• Use with conventional torque wrenches for heavy-duty applications.
• Supplied with reaction bars, in plastic storage case.
800655
800600
Specifications
Part No.
Gear Train
Velocity
Ratio
Multiplication
Factor
Efficiency
Max Input
Nm
Max Output
Nm
800600
Single Stage
Epicyclic
Single Stage
Epicyclic
5.33 to 1
5 to 1
340
1300
5.33 to 1
5 to 1
94%
(Approx)
94%
(Approx)
540
2700
800655
Input Drive
Sq.Dr.
32mm AF Male Hex
x 1/2”
36mm AF Male Hex
x 3/4”
Output Drive
Sq.Dr.
Weight
kg
3/4”
4.30
1”
4.50
Service & Diagnostics
143
General Workshop
Socket Sets
660570
Security Star 5 Point Bit Set – 9 piece
• 9 piece set of 1/4” sq dr 5 point Security Star Bits on storage rail.
• For 5 point tamperproof bolts.
• Ideal for modern fasteners as used on electrical components
•
e.g. ECU’s, airbags, injector system components, air flow meters,
diesel pumps etc.
Sizes: TS10H, TS15H, TS20H, TS25H, TS27H, TS30H, TS40H, TS45H, TS50H.
660576
E Torx® Socket Set – 8 piece
• 8 piece set of 3/8” sq dr E Torx® sockets on storage rail.
• Sizes: E6, E8, E10, E11, E12, E14, E16, E18.
660577
Hex Bit Socket Set – 8 piece
• 8 piece 3/8” sq dr Hex Bit Sockets (mm) on storage rail.
• Sizes: M3, M4, M5, M6, M7, M8, M9, M10.
660578
Tamperproof Torx® Bit Socket Set – 11 piece
• 11 piece 3/8” sq dr Tamperproof Security Torx® Bit Sockets
on storage rail.
• Sizes: T10, T15, T20, T26, T27, T30, T40, T45, T50, T55, T60.
016750
Alternator Combination Socket Set – 12 piece
• Special set of Spline & Torx Socket Bits for the removal
of Bosch type alternator free-wheel drive pulleys.
• Locks the alternator, allowing the central locking bolt
of the pulley to be released.
• Set contains both standard length and short length
versions, for ease of access.
• Selection of 33 tooth reaction nuts, and additional
•
144
adaptors, widens the applications range available for
this set.
BMW / Ford / Mercedes / Renault / Volkswagen, Audi
(VAG Group) with Bosch type alternators.
Size
M10
T50
M10
M8
T50
T40
H10
H8
Drive
1/2” sq
1/2” sq
10mm hex
10mm hex
10mm hex
10mm hex
10mm hex
10mm hex
Length
110mm
110mm
75mm
75mm
75mm
75mm
75mm
75mm
General Workshop
Grip Wrenches
066000
Grip Wrench Set– 5 piece
• A combination of 5 different popular grip wrench locking pliers
presented in a practical plastic storage wallet.
• An ideal set for both automotive and industrial technicians and engineers.
Contents
Part No.
066001
066003
066008
066009
066012
Description
5” Curved Jaw
10” Curved Jaw
7” Omnium Grip
10” Omnium Grip
10” Pinch-Off Clamp
Length (mm) Capacity (mm)
135
0-30
235
0-63
200
0-40
235
0-60
235
30
Weight (g)
180
600
410
630
380
066001
Curved Jaw Grip Wrench 5”
• General purpose grip wrench for a wide variety of applications.
• Narrow profile, large opening curved shaped jaws.
• Provides firm grip on all round shapes.
• Length 135mm, capacity 0-30mm, weight 180g.
066003
Curved Jaw Grip Wrench 10”
• General purpose grip wrench for a wide variety of applications.
• Narrow profile, large opening curved shaped jaws.
• Provides firm grip on all round shapes.
• Length 235mm, capacity 0-63mm, weight 600g.
066008
Omnium Grip Wrench 7”
• Modern, multipurpose design ideal for all trades, including
welding, automotive, plumbing, DIY etc.
• Unique jaw configuration combining straight, curved and
convex profiles.
• Versatile tool which securely grips round, flat & larger sized objects.
• Length 200mm, capacity 0-40mm, weight 410g.
066009
Omnium Grip Wrench 10”
• Modern, multipurpose design ideal for all trades, including
welding, automotive, plumbing, DIY etc.
• Unique jaw configuration combining straight, curved and
convex profiles.
• Versatile tool which securely grips round, flat & larger sized objects.
• Length 235mm, capacity 0-60mm, weight 630g.
066012
Hose Pinch-Off Clamp
• Instant clamping of hoses without risk of damage to the hose.
• Ideal for brake, fuel, cooling system hoses.
• Also suitable for small diameter pipe (up to 30mm).
• Length 235mm, capacity 30mm, weight 380g.
Service & Diagnostics
145
General Workshop
Pliers
066027
Ergo-Grip
• Unique ‘piston-grip’ locking plier, specially designed
to reduce stress on the wrist and forearms.
• One hand control for release, adjustment.
• 2 in 1 pliers and locking pliers.
• 50% more force in twisting applications – more comfort, less fatigue.
• Jaw opening: 0-40mm.
035795
Ratcheting Hose Clamp Plier Set - 3 piece
• Set of three ratcheting hose clamp pliers – small/medium/large.
• Patented ratcheting mechanism, provides secure and safe
locking and release.
• Ideal for radiator hoses, fuel lines, brake and vacuum hoses.
• Swivel jaws provide parallel clamping for improved grip.
• Locking ratchet mechanism prevents accidental damage to hose.
035750
Plastic Hose Clamp Plier Set - 3 piece
• Set of three hose clamp pliers – small/medium/large.
• Ideal for radiator hoses, fuel lines, brake and vacuum hoses.
• Locking ring provides tight non-slip grip.
• Special jaw design avoids damage to hoses.
146
General Workshop
Inspection Tools
323700
Sonoscope
• A super-sensitive sound detector with a built-in diaphragm
•
which amplifies noise to diagnose many vehicle problems
including: noisy water pumps and wheel bearings, faulty
alternator/power steering, pump/air conditioning compressor
bearings, camshaft and crankshaft knocks, noisy tappets etc.
Robust metal and plastic construction with
550mm hose and 290mm probe.
030400
Flexible LED Inspection Torch
• Durable aluminium body.
• 610mm detachable memory flex cable.
• 4 bright white LED’s.
• Weatherproof.
• Operates on 3 x AA batteries (included).
030300
LED Inspection Torch
• Single, high output white LED.
• Operates on 3 x LR1 batteries (included).
300350
Mini Pocket Inspection Light
• Specially designed inspection light for viewing extremely small holes and cracks.
• Ideal for examining cylinder heads for cracks, leaks, foreign objects etc.
• Precision engineered, high quality, manufactured in EEC.
• Can inspect clearly down as low as 0.3mm holes or cracks.
• Light is provided by an XHL Xenon Halogen light source, projected via a mirror, and
focused via one of 17 different lenses – variable focal length.
• 10 x magnification - can focus on objects from 5mm to 250mm distance.
• Bevelled positioning guide to aid in examining very small holes or cracks.
• Ultra light weight – only 100g.
• Supplied with batteries and spare 2.5v XHL Xenon Halogen bulb.
Service & Diagnostics
147
General Workshop
Extractors
661950
Concentric Roller Race Extractors Set - 4 piece
• Concentric roller stud extractor set for use with 3/8” ratchet
1 ”
or 3/4” AF (19mm) wrench.
• Contains one of each 6mm, 8mm, 10mm, 12mm. /2
SQUARE
DRIVE
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
Concentric Roller Race Extractors
• Slimline 1/2” sq drive for ring or open end spanner.
Part No.
661993
Size
6mm
Description
Stud Extractor M6
661995
8mm
Stud Extractor M8
661997
661999
10mm
12mm
Stud Extractor M10
Stud Extractor M12
SQUARE
1/2”
SQUARE
1”
DRIVE
DRIVE
SQUARE
3/8”
DRIVE
SQUARE
3/4”
DRIVE
SQUARE
Stud Setters and Extractors
• Powerful grip for stubborn or rusted
threads, or for setting new ones.
• For 6-19mm studs.
1”
DRIVE
012000
012200
High strength, compact design.
For 6-12mm studs.
•
•
660990
Screw Extractor Set
• Spiral type, 5 piece set.
• 3-19mm.
018000
Straight Fluted Extractor Set
• Set of 10 guides, 5 drills and 5 extractor assemblies in plastic case.
• For removing broken studs 6-14mm diameter.
• Also available without drills, part number 018100.
018200
Straight Fluted Extractors
• Set of 5 extractors in plastic wallet.
148
018000
General Workshop
Circuit Testers
014900
Circuit Tester 6, 12, 24 volt
• A top quality, professional circuit tester with an unbreakable
polycarbonate handle and hardened steel probe.
• 1.5m heavy duty rubber insulated lead is designed to
withstand the toughest garage workshop conditions.
• Uses standard automotive bulb for easy replacement.
300424
Professional Cordless Circuit Tester
• Unique combination of features, makes this one of the most
productive Circuit Testers available in the market place.
• Safe to use with EGM’s, sensors, transducers, airbags etc.
• No ground wire or clips required.
• Detects from 3 to 28 volts.
• Light, sound and vibration to indicate voltage.
• Rugged stainless steel construction.
• Unique V-groove needle accessory for wire piercing.
• Solid state lamp for longer lasting performance.
• Long life alkaline batteries included.
General Workshop
Lubrication
670040
Grease Gun
• Allows lubricants to be injected in or on to components.
• Piston-type operation for single handed use.
• Complete with 3 jaw hydraulic connector and rigid
angled delivery tube.
Capacity
Safe Working Pressure
125cc
260bar
670050
Grease Gun Accessory Pack
• For use with 670040 Grease Gun or any alternative with
1/8” BSP thread.
• Contains 2 delivery spouts:
Cranked metal spout for use in confined areas - 150mm
Flexible spout for use in restricted areas - 300mm
660950
Oil Can
• Fitted with a flexible spout, the oil can operates by force feed
and has a spring trigger return.
• 500ml capacity.
• Allows visible indication of fluid level.
Service & Diagnostics
149
General Workshop
Tyre Testers
032800
Tyre Tread Depth Gauge
• Vehicle Inspectorate approved for MoT testing.
• Pocket-sized gauge with clear, easy to understand scale for fast tyre tread depth checks.
• Measures 0-26mm in 1mm increments.
• Complete with pocket clip.
076500
Digital Tyre Tread Depth Gauge
• Hardened and tempered stainless steel gauge.
• Large LCD display.
• Metric or imperial read-out.
• Zero setting for comparative measurement.
• Range: 0-25mm / 0-1”.
• Resolution: 0.01mm / 0.0005”.
• Accuracy: ±0.05mm / 0.002”.
• Battery Type: SR44 / LR44.
660740
Tyre Pressure Gauge - Dial
• An easy to read, shock protected dual scale gauge
for cars and light commercial vehicles.
• Manufactured in accordance with BS 4613.
Overall Length Gauge Dia.
90mm
62mm
Scale
0-3.5bar
660745
Tyre Pressure Gauge - Pencil
• Robust metal gauge with easy to read dual scale.
• Complete with valve core remover and pocket clip.
Overall Length Extended
120mm
156mm
150
Scale
0.5-3.4bar
General Workshop
Nut Splitters
660350
660350
Mechanical Nut Splitter
• Maximum nut size 25mm.
Spares
660352
660353
Force Screw
Cutter
031600
Hydraulic Nut Splitters
033600
Part No. Max. Nut Size Spares
031600
25mm
031612 Cutter & Anvil
033600
33mm
033612 Cutter & Anvil
031619 Allen Key
033604
Hydraulic Nut Splitter Set
033604
• Contains 031600 and 033600 Hydraulic Nut
Splitters in metal case.
General Workshop
General Workshop Tools
040101
Impact Driver Set
• For use with a medium weight hammer, to loosen stubborn screws and nuts.
• Ideal for removal of door hinge brackets.
• Supplied with a range of inter-changeable bits.
Spare Bits
Part No
670650
Description
5/16” Slot
Shank size
8mm, 5/16” Hex
Length mm
36
670652
3/8” Slot
8mm, 5/16” Hex
36
670654
½” Slot
8mm, 5/16” Hex
36
670660
XPT1
8mm, 5/16” Hex
36
670662
XPT2
8mm, 5/16” Hex
36
670664
670666
XPT3
XPT4
8mm, 5/16” Hex
8mm, 5/16” Hex
36
36
Service & Diagnostics
151
General Workshop
General Workshop Tools
670003
Pick-Up Tool (Claw Type)
• Handle operated pick-up claw.
• 500mm flexible shaft.
660773
Hose Clamp Driver Set - 3 piece
• Single hex driver, for tightening and releasing hose clamp fasteners.
• Ergonomic “Megatorque” screwdriver handle.
Part No.
660769
660770
660771
Description
6mm Hex Drive
7mm Hex Drive
8mm Hex Drive
028300
Circlip Tool Set 44-178mm
• Used to remove and replace circlip rings
on pistons, gears, etc.
• An internal and external set complete with 4 sets of
interchangeable tips.
• T bar and screw action for precise control.
• Spares: 028316 Spare Peg Set
691000
Scraper Set - 3 piece
• Hardened stainless steel scrapers with soft grip handles.
• Contains: 50mm, 32mm & 32mm (20°) scrapers.
660887
Hook, Pick and Scraper Set - 9 piece
• Hardened chrome vanadium steel.
• Ergonomic soft grip handles.
• Includes multi-purpose scraper, ideal for gasket scraping.
• Contains 8 hooks and picks, ideal for the fitting and removal
of seals, O rings, bushes, springs, cotter pins and fuses.
152
General Workshop
General Workshop Tools
Thread Restorer Files
• For repairing damaged threads where a conventional die cannot be used.
Part No. Thread
015600 BSW/BSF
Pitch
11, 12, 14, 16, 18, 20, 22, 26
015601
SAE/UN
12, 13, 14, 16, 18, 20, 24, 28
015602
015603
Metric
BSP
0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 3
11, 12, 14, 16, 19, 20, 22, 28
032005
Battery Tester
For testing the charge state of lead acid batteries.
Measures the specific gravity of battery acid, displayed as a
battery charge state.
Accurate, simple to use hydrometer type instrument
with glass tube and float, rubber siphon and probe.
•
•
660935
Wire Brush - 4 Row
• These special brushes are used to clean corroded material
and debris from metal components.
• Hardened and tempered steel wire fill.
• Wooden handle.
700930
Soldering Iron - 12 volt
• Supplied with battery connection clips and 4.5 metre of cable.
032700
Accelerator Pedal Depressor
• Holds the accelerator pedal in precise position
for constant engine speed.
• Progressive trigger action for increasing engine speed.
• Ideal for one-man operations.
032700
Service & Diagnostics
153
General Workshop
Electronic Testing Tools
300420
Electrical Fault Finder Kit
Tracks short and open circuits quicker and more easily. This kit allows you to trace troublesome circuits and locate faults, even
when the wires are inside conduits, harnesses, or behind panels and upholstery.
Multiple applications: this professional tool will work on all kinds of circuits with voltages between 6 and 42 Volt DC, such as
those found in cars, HGV’s, buses, trailers, tractors, boats, etc. With its wide working voltage range, automatic open/short
detection, flexible probe and adjustable sensitivity, the 300420 Fault Finder enables you to troubleshoot a complete array
of common problems, in a wide variety of vehicles.
• 42V Ready® for use in the new generation of vehicles with
mixed or single 42 Volt systems.
• Operates on DC voltages from 6 to 42 volts.
• Internally protected against power surges and overloads
• 8” flexible probe allows reaching wires in congested
places.
• Transmitter and receiver LED show open or short circuit
conditions.
• Variable audio/visual signal provides fast and intuitive
feedback on the circuit/wire proximity.
• Adjustable sensitivity for all tracing situations.
• No wire piercing required, non-contact technology.
• Tracing of wires is made possible even inside harnesses,
conduits, behind panels, under carpets, upholstery etc.
• Transmitter has auto polarity and leads with 5 amps
alligator clips.
300420 Kit Contents
300421 Transmitter
300422 Receiver
300424 Circuit Tester
Three sizes blade type fuse block connectors
Foam padded polypropylene carrying case
User’s Handbook
2 x 9v Alkaline Batteries
300421 Transmitter Technical Specifications
Voltage
Indicator
Connector
6 to 42 Volts
Green LED for power and open circuits
Red LED for short circuits
Two 5A alligator clamps with auto polarity 450mm cable
300422 Receiver Technical Specifications
Selectable sensitivity levels (Low, Med and High) insulated
steel probe
Receiver
Flexible 200mm
Green LED indicator for power and open circuits
Indicator
Red LED indicator for short circuits
Variable flashing and modulated audible signal
Battery Life Approx 25 hrs Auto Power Off, on receiver only
Sensitivity
300424 Circuit Tester Technical Specifications
Suits
Capacity
Indicator
Safe to use with EGM’s, Sensors, Transducers, Airbags etc
Detects from 3 to 28 volts
Light, Sound and Vibration to indicate voltage
Rugged stainless steel construction
Design
Unique V-groove needle accessory for wire piercing
state lamp for longer lasting performance
Battery Life Solid
Long life alkaline batteries included
300425
Fuse Block Connector Set
• Allows access to the vehicle electrical circuits, via the fuse socket.
• Can be used with standard multimeter probes or clips etc to check
voltage, current, circuits and components.
• Three (3) sizes to fit in place of the relevant circuit’s fuse.
• Provides easy access to circuits to energise or check electrical
components and accessories.
154
General Workshop
Electronic Testing Tools
300500
Automotive Digital Multimeter
Applications
Measures engine RPM, ignition dwell angle, and temperature of exhaust manifold, cooling system, air conditioning,
heating system, catalytic converter etc.
Measures output in sensors like oxygen (O2), coolant temperature, throttle positions (TPS), manifold air pressure (MAP),
manifold air flow (MAF) etc.
Checks grounds, voltage drops and continuity across connectors, wires, cables, relays contacts, lamps, switches etc.
Checks components like alternator, diodes, relays, coils, condensers, ignition coils, spark plug wires, magnetic pick-ups,
motors, switches, fuses, etc.
Features
Full control manual range selection.
Large 3½ digit LCD display.
AC/DC Voltage measurement up to 600 Volt.
DC Current measurement up to 10 A.
Tachometer function measures from 500 to 10,000 rpm.
Dwell measurement from 0 to 120°.
Temperature measurement from –40°C to 1000°C.
Resistance measurement up to 2 M .
Diode and Continuity Tests.
Overload protection and Auto Power-off.
Soft holster for instrument protection.
Data hold facility for ‘freezing’ of readings.
Supplied with test leads, croc clips and instructions.
•
•
•
•
•
•
•
•
•
•
•
•
•
Ʊ
Technical Specifications
Display
Power Source
Test probes
P hysical Dimensions
(including holster)
Weight
- 3 ½ Digit LCD (Max reading 1999)
- ½” (12.5mm) Digits
- High Voltage warning indicator
- Automatic (-) negative polarity indicator
- Automatic Zeroing
- Automatic over-range indication
- Low battery indicator
Standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22
(included)
One red and one black 1000V/10A rated (IEC1010/EN61010
CAT II), 35” long, K-type temperature probe
5.51” (H) x 2.75” (W) x 1.41” (D)
140mm (H) x 70mm (W) x 36mm (D)
Approximately 12.34 Oz (350g) including battery
Electrical Specifications
DC Voltage
AC Voltage
DC Current
Resistance
Tachometer
Diode test
Continuity Test
Temperature
± 0.25% ± 2dgts, 1M Ohm input impedance,
600V AC/DC Overload protection
± 1.5% ± 5 dgts, 450K Ohm input impedance
40 to 200 Hz, 600V AC/DC Overload protection
± 1.0% ± 3 dgts, Internal 10A/250V fuse protection
± 1.0% ± 3 dgts, 250V AC/DC Overload protection
30 to 20000 rpm ± 2 rpm
2.4 ± 0.6 mA test current, 3.2V max test voltage
Audible indicator (Buzzer) with circuit resistance below
100 Ohm
40° to 400°C (± 0.7 + 3 dgts),
400°C to 1000°C (± 1.5 + 10 dgts)
Service & Diagnostics
155
General Workshop
Electronic Testing Tools
300535
Dual Display Autoranging Automotive Digital Multimeter
Applications
Measures engine RPM, ignition dwell angle, and temperature of exhaust manifold, cooling system, air conditioning,
heating system, catalytic converter etc.
Measures output in sensors like oxygen (O2), coolant temperature, throttle positions (TPS), manifold air pressure (MAP),
manifold air flow (MAF) etc.
Checks grounds, voltage drops and continuity across connectors, wires, cables, relays contacts, lamps, switches etc.
Checks components like alternator, diodes, relays, coils, condensers, ignition coils, spark plug wires, magnetic pick-ups,
motors, switches, fuses, etc.
Features
Fully autoranging, primary and secondary display, bargraph,
overload protection and auto power-off.
Large selectable 4 ¾ or 3 ¾ digit main display – 4 digits
secondary display.
42 segments analog bargraph.
DC Voltage measurement up to 1000 Volt.
AC Voltage measurement up to 750 Volt.
AC/DC Current measurement up to 10A.
Tachometer function with inductive pick up measures from
30 - 20,000 rpm.
Dwell measurement in degrees from 0 - 360° or duty cycle
from 0-100%.
Temperature measurement from -20°C to 1000°C or 0° to
1832°F (selectable °C or °F).
Resistance measurement up to 40 M .
Frequency measurement from 10 to 20 KHz.
Fuel injection test measures pulse width from 0.05 to 250mS,
or duty cycle from 0 to 100%.
Oxygen Sensor test function.
Alternator test function.
Fault Code Reader & DTC Decoder.
Diode & Continuity Tests.
Overload Protection & Auto Power-off.
Soft holster for instrument protections.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ʊ
Technical Specifications
Display
Power Source
Test probes
Temperature Probe
Tachometer Function
Physical Dimensions
(including holster)
Weight
156
- 4 ¾ digits main display
- 4 digits secondary display
- 42 Segments analog bargraph (20 updates/second)
- Backlight
- Automatic (-) negative polarity indicator
- Automatic Zeroing
- Automatic over-range indication
- Low battery indicator
One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F
22 (included)
One red and one black, 1000V/10A rated (IEC1010/EN61010
CAT II), 35” long
Bead type K thermocouple
Inductive Pickup
6.30” (H) x 3.22” (W) x 1.89” (D)
160mm x 82mm x 48mm
Approximately 12.14 Oz (345g) including battery
Electrical Specifications
DC Voltage
AC Voltage
DC Current
AC Current
Resistance
Frequency
Tachometer
Dwell
Fuel Injector
(pulse width)
Temperature
0 to ± 1000V, ± 0.3% ± 2dgts, 10M input impedance
0 to 750V, ± 2.5% ± 5 dgts,
10M input impedance 50 to 500 Hz
0 to ± 10A ± 0.8% ± 4 dgts
0 to 10A, ± 0.8% ± 4 dgts
0 to 40M ± 0.8% ± 5 dgts
0 to 20 KHz ± 0.01% ± 2 dgts
30 to 20,000 rpm ± 2 rpm
0 to 360° ± 1.2°/krpm/cyl + 2d
0.05 to 250 mS ± 0.05 mS + 1d
-20° to 1000°C or 0°F to 1832°F (± 2% + 1 dgts)
General Workshop
Electronic Testing Tools
Digital Bargraph Multimeters
Range of Multimeters with unique features:
TPR ‘soft-touch’ rubber over moulding provides excellent grip.
Tilt stand – provides access to battery cover.
Adjustable velcro strap with powerful magnet for hanging the meter safely.
Safety – EN61010-1, Cat III 600V, CE approved.
Current terminals fused for safety and protection.
•
•
•
•
•
300505
Digital Multimeter
• Auto-ranging multimeter.
• Bar Graph display.
• Data hold facility.
• AC Volts – 3.4V, 34V, 340V, 600V.
• DC Volts – 340mV, 3.4V, 340V, 600V.
• AC Current – 340uA, 3400uA, 34mA, 340mA, 10A.
• DC Current – 340uA, 3400uA, 34mA, 340mA, 10A.
• Resistance – 340 , 3.4k , 340k , 3.4M , 34M .
• Diode test, Continuity test.
• Supplied with:
Ʊ
Ʊ
Ʊ
Ʊ
Ʊ
- Standard leads and probes.
- Operating instructions.
300525
Automotive Test Meter
• Auto-ranging Multimeter.
• Data hold facility.
• AC Volts – 400mV, 4V, 40V, 400V, 600V.
• DC Volts – 400mV, 4V, 40V, 400V, 600V.
• AC Current – 400uA, 4000uA, 40mA, 400mA, 10A.
• DC Current – 400uA, 4000uA, 40mA, 400mA, 10A.
• Resistance – 400 , 4k , 400k , 4M , 40M .
• Frequency – 4kHz, 40kHz, 400kHz.
• Temperature – –20° to +1000°C.
• RPM, % Duty Cycle, Dwell Angle.
• Diode test, Continuity test.
• Supplied with:
Ʊ
Ʊ
Ʊ
Ʊ
Ʊ
- Standard leads, extension leads.
- Probes, needle probes, temp coupling.
- RPM clamp.
- Instruction manual featuring a wide variety of
Diagnostic and Component test procedure.
Service & Diagnostics
157
General Workshop
Electronic Testing Tools
Electrical Test Leads and Accessories
• Specially designed for automotive testing which can be used with all leading makes of multimeters and test equipment.
• Test leads are manufactured from double insulated silicone with multi-strand copper core.
• All leads and accessories are manufactured to IEC 1010.
• Rating: 1000v Cat III (fused items = 600v).
• All items use standard 4mm cable sockets and are compatible with all leading makes of test equipment.
300491
300496
• Can be used with all standard
• Pair of cable piercers
Double Insulated Test Leads 1.2m
4mm multimeter connectors
and accessories.
300492
Double Insulated Test Lead Extension Set 1.2m
• Extends the working range
of standard test leads.
300493
In-Line Fuse Links 10 amp fuse
• Connect between test leads and
probes/accessories to protect your
multimeter from accidental
overload – 10 amp fuse.
300494
Insulated Croc Clips with 10 amp
In-Line Fuse
• Pair of croc clips with built-in
accidental overload
protection – 10 amp fuse.
Cable Piercers
– specially designed
ultra-thin wedge profile
is ideal for automotive work.
300497
Bed of Nails Insulated Clips
• Pair of ‘bed of nails’ type clips,
providing a high degree of grip
and connectivity, particularly
suited for automotive applications.
300499
Display Stand
• Selection of test
leads & accessories.
300503
Cables Probes – Insulation Piercing
• Set of 2 probes for cable piercing.
• Protected tip to avoid shorting.
• 4mm socket connection
for standard
multimeter cables.
300495
Slimline Back Probes
• Pair of ultra-slim back probes,
specially designed for
automotive applications.
300502
Test Lead & Probe Set
• Optional accessory for use with
•
•
158
most standard multimeters
(4mm plugs).
Selection of probes and clips.
Suits part no. 300500 & 300510.
300490
Automotive Test Lead Set
Pair of Double Insulated Test Leads (1.2m)
Pair of Insulated Croc Clips
Pair of Slimline Back Probes
Pair of Cable Piercers
General Workshop
Electronic Testing Tools
Automotive & Industrial AC/DC Digital Current Clamp Meters
Features
Large easy to read 0.393” (10mm)
digits display.
Single knob selects functions.
Peak hold function.
Display data hold.
Rugged plastic enclosure.
Design allows comfortable handling.
One rotary switch operation.
Resistance measurement.
2 readings per second sampling.
Continuity check with audible indicator.
Protective hand guard.
50 hrs in use battery life.
Soft carrying deluxe pouch.
Test leads and batteries included.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Applications
Measure currents in circuits like battery
chargers, alternators, starter motors,
electrical loads etc.
Check grounds, voltage drops and
continuity across connectors, wires, cables,
relay, contacts, lamps, switches, etc.
Check components like alternators,
diodes, relays, coils, condensers, ignition
coils, magnetic pick-ups, motors, switches,
fuses etc.
An essential all round troubleshooting
tool for electrical and electronic circuits
and systems.
•
•
•
300400
100 Amp Micro Current Clamp Meter
• Specially designed for measuring very low current,
to accuracy of 0.001 of an Amp
• Small jaw: 1.2” (W) x 0.53” (d) (300 x 13.4mm)
• Clamp opens up to ½ inch (12.5mm)
• Relative measurement
• AC/DC Voltage measurement up to 600 Volt
• AC/DC current measurement from
0.001Amp up to 100 Amp
Electrical Specifications
DC Voltage
AC Voltage
DC Current
AC Current
Resistance
Continuity Test
± 2% ± 2 dgts
600V AC/DC maximum
660Vrms overload protection
± 1.5% ± 5 dgts 50 to 500 Hz,
600V AC/DC maximum,
660 Vrms overload protection
± 2.5% ± 10 dgts, 100 Amp Maximum
150 Arms overload protection
± 2% ± 10 dgts, 600 Amp Maximum
150 Arms overload protection
± 1% ± 3 dgts, 100K
660 Vrms overload protection
Audible Indicator (Buzzer) when circuit resistance
is below 1000 max voltage test <3Vdc
•
Technical Specifications
• Display
•
•
•
•
•
- Large 4 digit LCD (Max. Reading 9999).
- Automatic over-range indication.
- Auto power off.
- 0.393” (10 mm) digits.
- Units indicator.
- Relative measure indicator.
- Peak hold indicator.
- VDC/VAC indicator.
- Continuity indicator.
- Automatic (-) negative polarity indicator.
- One touch button auto zeroing.
- Low battery indicator.
Power Source: Two (2) Standard AA
A 1.5 Volt alkaline battery type AAA UM4
or equivalent.
Test Probes: One red and one black,
1000V/15A rated (EC1010/EN61010 CAT II),
35” long.
Physical Dimensions:
7.95” (H) x 2.62” (W) x 1.33” (D) –
202mm (H) x 67mm (W) x 33.8mm (D)
Weight: Approximately 6.34 oz (180g)
including battery.
300410
1000 Amp Current Clamp Meter
• AC/DC Voltage measurement up to 1000 Volt
• AC/DC Current measurement up to 1000 Amps
• Clamp opens up to 1 inch
Electrical Specifications
DC Voltage
AC Voltage
DC Current
AC Current
Resistance
Continuity Test
± 1% ± 2 dgts
1000V AC/DC maximum
1020 Vrms overload protection
± 1.5% ± 5 dgts, 50 to 500 Hz,
1000V AC/DC maximum,
1020 Vrms overload protection
± 2.5% ± 10 dgts, 1000 Amp maximum,
1020 Arms overload protection
± 2% ± 10 dgts, 1000 Amp maximum,
1020 Arms overload protection
± 1% ± 3 dgts, 100K maximum,
660 Vrms overload protection
Audible indicator (Buzzer) when circuit resistance
is below 1000 max voltage test <3 Vdc
* Please note features, applications, technical specifications
above are common to both products.
Service & Diagnostics
159
General Workshop
Electronic Testing Tools
300430
Infra Red Laser Tachometer
Non-contact Infra-Red Laser Tachometer for measuring RPM on rotating shafts,
pulleys, wheels etc. Laser picks up signal from reflective tape which is placed on
the rotating shaft. Accurate to 0.1 rpm, and will measure up to 99,999 rpm.
Features
Bright and powerful laser optical system allows for easy targeting
of rotating shafts, wheels, pulleys etc, even in bright daylight.
Measurements can be obtained from safe and comfortable distances
– from 5 to 50cm.
The large 5 digits display allows measurements without the
need to switch scales or multiply reading ranges.
Unit comes complete with batteries, reflective tape and soft
carrying pouch.
•
•
•
•
Technical Specification
• RPM range from 2.5 to 99,999.
• Auto Ranging.
• 0.5 Second sampling time.
• Memory recall: Max, Min, Last value.
• TOT: Total revolution count.
• Resolution: 0.1 rpm <1000 rpm 1.0 rpm>1000 rpm.
300435
Infra Red Laser Thermometer
The Infra-Red Laser Thermometer has a range of –20 to 550°C (–58 to 1000°F),
which is ideal for automotive testing and a resolution
of 0.1°C (1°F) and an 8:1 optics ratio.
Features
Laser pointer output (on/off).
Infra-Red Sensor.
LCD backlight display.
S:D optimum ratio of 8:1.
Class II Laser.
C/F selection switch.
Scan and data hold modes.
Carrying pouch.
•
•
•
•
•
•
•
•
160
General Workshop
Electronic Testing Tools
300415
Terminator Digital Voltage Tester
For testing voltage amplitude, duty cycle and speed (Hertz), quickly and
without fear of damage to the circuit that is being tested.
Digital read out and flashing LED’s give a clear indication of the type
of signal or voltage being seen, so avoiding the confusion that can
often be brought about by the use of a multi-meter.
Specially designed for the testing of automotive sensor signals
and voltages.
Built-in LED torch, which illuminates the area of work, thereby
significantly reducing the chance of probing the wrong wire.
•
•
•
340312
Electronic Thermometer/Temperature Probe
Ideal tool for testing the temperature and efficiency of
Air-Conditioning systems.
Monitors maximum and minimum values.
Memory recall function for maximum and minimum values.
Range 0 - 50°C (0.1°C resolution).
120mm stainless steel probe with extension cable connection.
Switchable from C to F scales.
Countdown timer with audible alarm.
Internal battery with low power indicator.
•
•
•
•
•
•
•
300694
Remote Key Fob Tester
A compact and simple device that checks to see if the vehicle’s remote key fob is
functioning correctly.
A magnetic strip allows the user to attach the unit to a metal surface (eg a tool
cabinet) which allows for the range to be checked at the same time.
Tests output signal from key fob, on both Infra-Red and 433 MHz frequencies.
Suitable for the majority of key fobs available in the UK and European markets.
•
•
•
Service & Diagnostics
161